Probleme mit Phillips(Astra) und der Kanalsuche !

[KeineKanäle]

Ich hab eine Phillips Box !
Erfolgreich in den debug Mode versetzt und die neuse version des ALEXW Images aufgezogen und auch die cdk.cramfs es funktioniert alles wunderbar !!!
Die Kanalsuche ist erfolgreich ! Es funktioniert also alles ! alles ? nicht ganz alles
er findet nicht einen Kanal ! Er findet bei der Suche gar nichts !

Ich habe keinen DisQUe Schalter und mein Tuner ist heile denn ich hab zum test die alte BN Version aufgespielt da hab ich super Bild !!!

Ich will aber nicht zurück zu diesem lamen Prog sondern will das tolle Linux Prog. nutzen !

Ich habe schon viele möglichkeiten ausprobiert (Viele Versionen) aber nix hilft ich bin Ratlos bitte helft mir !

[DieMade]

Bootlog posten (siehe FAQ).

[KeineKanäle]

[b]Bootlog:[/b]

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-42.9d.93.07.00.00-6e
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)

CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Phillips
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . Unknown node type: e002 len 94 offset 0x86500
done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635491 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 635427 Bytes = 620 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft ;-) #1 Fre Feb 28 20:20:56 CET 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247125000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30812k available (1120k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2b:2f:df
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modu
les/2.4.20/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
jffs2_get_inode_nodes(): CRC failed on node at 0x00086500: Read 0xffffffff, calc
ulated 0xe7bb839c
Using /lib/modules/2.4.20/misc/info.o
Using /lib/modules/2.4.20/misc/event.o
event: init ...
Using /lib/modules/2.4.20/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Using /lib/modules/2.4.20/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.20/misc/dvb_demux.o
Using /lib/modules/2.4.20/misc/dvbdev.o
Using /lib/modules/2.4.20/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
Using /lib/modules/2.4.20/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
Using /lib/modules/2.4.20/misc/cam.o
der moment ist gekommen...
Oops: kernel access of bad area, sig: 11
NIP: C000AA90 XER: 00000000 LR: C38E4898 SP: C1CF7E30 REGS: c1cf7d80 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: C390A000, DSISR: C0000000
TASK = c1cf6000[38] 'insmod' Last syscall: 6
last math 00000000 last altivec 00000000
GPR00: 00000000 C1CF7E30 C1CF6000 C38E8000 C3909FFC 00020000 C38E8FFC 7E649B78
GPR08: 38A00000 C38E0000 C38C0000 C000AA74 C017177C 00000000 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01CF7F40 C1CF7EA8 10076260
GPR24: C1AE0000 C1AE11E0 C0130000 C3909000 C0140000 00068D58 FFFFFFFF FF0009C0
Call backtrace:
C38E4878 C38E4BA0 C38E5184 C0010188 C00025DC 10017A34 10018F18
10003C84 10003890 0FEF5370 00000000
Segmentation fault
Using /lib/modules/2.4.20/misc/dmxdev.o
write 1 event's ...
write 1 event's ...
Using /lib/modules/2.4.20/misc/dvb_frontend.o
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Bold)
Using /lib/modules/2.4.20/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
ENX-INITed -> 0
there MIGHT be no TS :(
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.2 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20/misc/dvb.o
dvb.c: init_dvb
Init TDA8044H
Using /lib/modules/2.4.20/misc/tda8044h.o
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.c: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 3).
Using /lib/modules/2.4.20/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp
$
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.20/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.20/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.4 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.20/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
cdkVcInfo $Id: cdkVcInfo.c,v 1.2 2003/03/02 23:28:32 alexW Exp $

$Id: sectionsd.cpp,v 1.164 2003/03/03 13:38:33 obi Exp $
caching 504 hours
events are old 60min after their end time
$Id: zapit.cpp,v 1.290.2.12 2003/03/03 11:18:41 alexw Exp $
Controld $Id: controld.cpp,v 1.99 2003/03/04 16:33:16 alexw Exp $

[controld] Boxtype detected: (3)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.421 2003/03/03 22:19:15 mws Exp $

[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
IP : 192.168.0.122
Netmask : 255.255.255.0
Broadcast: 192.168.0.255
Gateway :
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1197500
[dmx.cpp:readDmx:289] DMX_READ: Connection timed out
zap failed!

[b]Kanalsuche:[/b]

[sectionsd] getUTC: read: Connection timed out
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (10876000 22000000 1)
****************

[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (10861750 22000000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 1139000
[dmx.cpp:readDmx:289] DMX_READ: Connection timed out
no new transponder(s) in current nit
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1236500
[dmx.cpp:readDmx:289] DMX_READ: Connection timed out
no new transponder(s) in current nit
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable


Und wenn ich die ucodes prüfe dann steht bei com_alpha = unknown

Sonst aber alles ok ! Hab auch schon ne Senderliste eingefügt !

Wäre echt dankbar für hilfe

[KeineKanäle]

Ich glaube nun zu wissen das es an dem Fehler mit der com-alpha.bin liegt ich habe eine sicherung der br sofware gemacht und auch die ucodes daraus aber ich glaub meine karte war nicht eingelegt ! Ich kann mit der sicherung der altensoftware das BN wieder herstellen nur wenn ich dann das image lesen will dann kommt nur immer nochmalnochmalmochmalnochmal........ und immer so weiter nix anderes hab das dann so ne halbe stunde laufen lassen und immer noch nochmal nochmal usw Wie krieg ich das image nun ausgelesen ???

[thegoodguy]

http://www.dietmar-h.net/flash_read_de.html