muss euch mal wieder mit meinen newbiefragen nerven ;(

Beitrag von **TimmA** » Montag 31. März 2003, 17:34

Hallo

( Im vorraus is zu sagen ich habe im FAQ & mit Suchfunktion nichts zu diesem Thema gefunden

)

also folgendes Prob :

Habe Nokia Dbox 2 mit Neutrino drauf, nach leichten Anfangsschwierigkeiten hat aber alles soweit geklappt - sind die neusten Versionen drauf. Aber leider finde ich auf welchem Satellit auch immer (hab schon alle aus der Liste durchversucht) kein RTLund RTL2. Pro7,Sat1 usw geht alle ohne Probleme was kann ich da machen ?

Beitrag von **fx44** » Montag 31. März 2003, 18:44

mehr info..

da du von satellieten sprichst nehem ich mal an du hast schon nen sat box, weil im kabel könnteste die eh nciht finden

worauf is den deine schüssel ausgerichtet ?

Beitrag von **TimmA** » Montag 31. März 2003, 19:07

Hallo,

ja ich habe eine Nokia Dbox 2 Sat, aber

... ich habe auch noch eine alte Sagem Dbox (1) mit Betanova der finde ich alles .... wie die Satellitenschüssel ausgerichtet ist - da muss ich leider passen, aber daher kann es eigentlich nicht kommen, da ich ja mit einer andern Dbox alles finde auch Rtl usw.

Kann mir noch jemand helfen ? Kkann es an den Ucodes liegen ? habe da echt nich soviel Ahnung von

.

Frage: Welche Dateien müssen in das u.A in das Ucodes Verzeichniss ?

avia500.ux

oder

avia600.ux

oder beides ?

+ cam-alpha.bin oder ?

Habe ne Nokia Dbox2 Sat

Beitrag von **fx44** » Montag 31. März 2003, 19:41

mm hört sich fast danach an als wenn dir ne schaltspannng fehlt..

wenn du überhaupt was sehen kannst sind die ucodes schon ok

ich muß da passen

Beitrag von **TimmA** » Montag 31. März 2003, 19:43

Hallo,

hmmm was kann ich da dann machen ?

will nicht Big-Brother verpassen ^^ also bitte helft mir

Beitrag von **rasc** » Montag 31. März 2003, 21:06

Ohmann, gibt es tatsaechlich doch einen, der den Krampf gucken will?

Haette ich echt nicht gedacht, dass sich da einer freiwillig outet.

Aber mal gucken, mit einem entsprechenden künstlich erzeugten Medien-Hype wird man wohl wieder ein paar Platschnasen dazu bringen das anzugucken...

Ich sag ja immer: Marketing ist "Bedarf erzeugen, auch wenn es keiner braucht..."

Aber naja, das sieht so aus, als waere irgendwas mit deinem Diseqc nicht OK. Such mal nach LBK 10 oder LBK 20 im Forum...

Beitrag von **SoLaLa** » Montag 31. März 2003, 22:31

neee,
das is ja ne noki die nicht geht... die hat keinen LNBK20

@TimmA: wieviele Sender findet der Suchlauf denn insgesamt?

Beitrag von **TimmA** » Dienstag 1. April 2003, 16:06

Er findet so ca. 500

Beitrag von **TimmA** » Freitag 4. April 2003, 21:32

Hallo,

hmmm hat keiner eine Lösung ??

ich weiss echt nichtmehr weiter

plz help

Beitrag von **SoLaLa** » Samstag 5. April 2003, 19:28

hmmm, also wenn die Kiste knapp 500 TVprogramme findet, dann sollte eigentlich alles da sein...
Poste mal n Bootlog wo der Senderscan mit drin ist

Beitrag von **TimmA** » Mittwoch 9. April 2003, 21:26

Hallo,

hier die Log

__________

Ã»debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-ef.5a.02.07.00.00-65
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036
debug: Got Block #0040
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000

PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . \ -

.

LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 1 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635491 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 635427 Bytes = 620 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

____________

Irgendwie bezweifel ich das das alles sein kann aber mehr suckst die box auch nicht nach dem 2. mal aus ( habe FAQ bereich durchgelsen wie man das mit Serielen Botlogs macht )

Des weitern habe ich das Problem das die Box in letzer zeit viiiel länger zum "Hochladen" braucht und nachdem ich Neutrino auswähle extrem lang auf "waiting" steht (das 1. Programm läuft aber schon ) nur Fernbedienung geht nicht und dann später mal wann sie Lust hat und unten die Info welche Programm gerade läuft, Uhrzeit und das ganze bleiben einfach da wenn ich auf "OK" drücke passiert nicht da die Fernbedingung ja in letzter Zeit sowieso nicht wirklich lust hat zu gehen

( Also an den Baterien liegt es nicht so doof bin ich auch nicht

)

Soll ich mal versuchen neu zu Flashen, dass weiss ich ja mitlerweile wie es funktioniert

danke für eure Antworten ...

Beitrag von **SoLaLa** » Mittwoch 9. April 2003, 23:32

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer

an der Stelle die "2" auf der Tastatur tippen, dann geht das Log weiter

Beitrag von **TimmA** » Donnerstag 10. April 2003, 12:31

LOG ::

_________________________________________________________

Ã»debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-ef.5a.02.07.00.00-65
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036
debug: Got Block #0040
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000

PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)

CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . \ -

.

LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 1 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635491 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 635427 Bytes = 620 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Ã»debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-ef.5a.02.07.00.00-65
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036
debug: Got Block #0040
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000

PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . \ -

.

LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 1 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635491 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 635427 Bytes = 620 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20 (von alexW) Wer Kernels nachmacht, oder faelscht, wird bestraft ;-) #1 Fre Feb 28 20:20:56 CET 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30812k available (1120k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:15:af:c2
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init

init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modules/2.4.20/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20/misc/info.o
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
Using /lib/modules/2.4.20/misc/event.o
event: init ...
Using /lib/modules/2.4.20/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Using /lib/modules/2.4.20/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2).
Using /lib/modules/2.4.20/misc/dvb_demux.o
Using /lib/modules/2.4.20/misc/dvbdev.o
Using /lib/modules/2.4.20/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
Using /lib/modules/2.4.20/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
Using /lib/modules/2.4.20/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
write 1 event's ...
write 1 event's ...
Using /lib/modules/2.4.20/misc/dmxdev.o
Using /lib/modules/2.4.20/misc/dvb_frontend.o
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Bold)

Using /lib/modules/2.4.20/misc/avia_gt.o
^Havia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.2 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20/misc/dvb.o
dvb.c: init_dvb
Init VES1893
Using /lib/modules/2.4.20/misc/ves1893.o
i2c-core.o: driver VES1893 DVB demodulator registered.
i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
VES1893: attaching VES1893 at 0x10 avia_gt_core: masking unhandled irq reg 0 bit 6
to adapter
Using /lib/modules/2.4.20/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.20/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.20/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.4 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.20/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
CXA2092 found
CXA2092 found
cdkVcInfo $Id: cdkVcInfo.c,v 1.2 2003/03/02 23:28:32 alexW Exp $

$Id: sectionsd.cpp,v 1.164 2003/03/03 13:38:33 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] no card is in slot #2
[camd] no card is in slot #1
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.290.2.12 2003/03/03 11:18:41 alexw Exp $
Controld $Id: controld.cpp,v 1.99 2003/03/04 16:33:16 alexw Exp $

[controld] Boxtype detected: (1)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.421 2003/03/03 22:19:15 mws Exp $

[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
IP : 192.168.0.24
Netmask : 255.255.255.0
Broadcast: 192.168.0.255
Gateway :
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1880000
avia_

_________________________________________________________

ISt das nun richtig ?`

Beitrag von **TimmA** » Freitag 11. April 2003, 19:45

Hallo oder so ?

Log :

Ã€{debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-ef.5a.02.07.00.00-65
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
debug: Got Block #0004
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036
debug: Got Block #0040
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000

PPCBoot 1.1.6 (TuxBox) (Feb 17 2003 - 19:30:34)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . \ -

.

LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 1 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635491 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 635427 Bytes = 620 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20 (von alexW) Wer Kernels nachmacht, oder faelscht, wird bestraft #1 Fre Feb 28 20:20:56 CET 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30812k available (1120k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:15:af:c2
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init

init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modules/2.4.20/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20/misc/info.o
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
Using /lib/modules/2.4.20/misc/event.o
event: init ...
Using /lib/modules/2.4.20/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Using /lib/modules/2.4.20/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2).
Using /lib/modules/2.4.20/misc/dvb_demux.o
Using /lib/modules/2.4.20/misc/dvbdev.o
Using /lib/modules/2.4.20/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
Using /lib/modules/2.4.20/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
write 1 event's ...
write 1 event's ...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Bold)
Using /lib/modules/2.4.20/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.20/misc/dmxdev.o
Using /lib/modules/2.4.20/misc/dvb_frontend.o
Using /lib/modules/2.4.20/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.2 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20/misc/dvb.o
dvb.c: init_dvb
Init VES1893
Using /lib/modules/2.4.20/misc/ves1893.o
i2c-core.o: driver VES1893 DVB demodulator registered.
i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
avia_gt_core: masking unhandled irq reg 0 bit 6
VES1893: attaching VES1893 at 0x10 to adapter
Using /lib/modules/2.4.20/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.20/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.20/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.4 2003/03/04 08:44:39 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.20/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
CXA2092 found
CXA2092 found
cdkVcInfo $Id: cdkVcInfo.c,v 1.2 2003/03/02 23:28:32 alexW Exp $

$Id: sectionsd.cpp,v 1.164 2003/03/03 13:38:33 obi Exp $
caching 504 hours
events are old 60min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.290.2.12 2003/03/03 11:18:41 alexw Exp $
[camd] no card is in slot #2
[camd] no card is in slot #1
Controld $Id: controld.cpp,v 1.99 2003/03/04 16:33:16 alexw Exp $

[controld] Boxtype detected: (1)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.421 2003/03/03 22:19:15 mws Exp $

[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
IP : 192.168.0.24
Netmask : 255.255.255.0
Broadcast: 192.168.0.255
Gateway :
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1880000
avia_gt_dmx: reloading stc
avia_gt_core: masking unhandled irq reg 1 bit 15
avia_core.c: avia_interrupt: Reserved 01.
write 1 event's ...
write event ... free found
write 1 event's ...
write event ... free found
write event ... filter ok
[cat.c] read: Connection timed out
[CFrontend::getEvent] FE_FAILURE_EV

und dann hab ich mal serderscan durchlaufen lassen (auf Astra 19.2E)

****************
No signal found on transponder (10876000 22000000 1)
****************

[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (10861750 22000000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 1139000
found new transponder(s) on 11739000 27500000 1
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (11836500 27500000 0)
****************

[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12070500 27500000 0)
****************

[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (11797500 27500000 0)
****************

[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (11719500 27500000 0)
****************

[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12031500 27500000 0)
****************

[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12148500 27500000 0)
****************

[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (11758500 27500000 0)
****************

avia_gt_dmx: reloading stc
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1880000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1567500
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1685500
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1729000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1758500
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1788000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1817500
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1847000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1935500
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1288000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1406000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1023250
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1082250
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1111750
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1125125
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1139000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1178000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1217000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1256000
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12109500 27500000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 1295000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1334000
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (11953500 27500000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 1412000
[CFrontend::getEvent] FE_COMPLETION_EV: freq 1451000
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12070500 27500000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 1529000
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12187500 27500000 0)
****************

[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12207000 27500000 1)
****************

[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12226500 27500000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 1685000
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12304500 27500000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 1724000
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12343500 27500000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 1763050
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12382500 27500000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 1802000
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (11836500 27500000 0)
****************

[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12460500 27500000 0)
****************

[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12515250 22000000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 1922000
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12544750 22000000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 1951500
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12574250 22000000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 1981000
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12603750 22000000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 2010500
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12633250 22000000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 2040000
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12662750 22000000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 2069500
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12692250 22000000 0)
****************

[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (12721750 22000000 0)
****************

[CFrontend::getEvent] FE_COMPLETION_EV: freq 2128500
[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (11875500 27500000 0)
****************

[CFrontend::getEvent] FE_FAILURE_EV

****************
No signal found on transponder (11992500 27500000 0)
****************

Beitrag von **TimmA** » Montag 14. April 2003, 11:36

Hallo,

weiss niemand was ich machen könnte ?

kann nu schon seid 1 Monat schon kein RTL, RTL II, usw gucken .

Egal was ich mache es will einfach nicht gehen naja ich kenne mich da auch nicht so aus aber ihr also sagt mal was

Beitrag von **roland303** » Samstag 19. April 2003, 03:01

Tach!

ich hatte das problem das ich folgende sender nicht empfangen konnte:
DSF, Home Shopping Europe, Kabel 1, N24, Neun Live, Pro 7, Sat.1

Lag an einem DECT-Schnurlos-Telefon.
Sobald ich das Netzteil von der Basisstation rausgezogen hatte gingen alle Sender. (Über DECT steht auch schon viel im Forum)

Vielleicht hast du auch irgendein Gerät was da stört.

Und über Astra krieg ich fast 800 services, also fehlt da bei dir eindeutig noch was.

ich hoffe ich hab dir irgendwie geholfen

mfg roland