YADD starten

Sammlung von Anleitungen und HowTos für dBox2
BusterOne
Interessierter
Interessierter
Beiträge: 20
Registriert: Samstag 26. April 2003, 01:03

YADD starten

Beitrag von BusterOne »

Hallo Zusammen,

ich habe die letzten Tage immer wieder probiert mit der jeweils aktuellen Yadd zu starten. Leider bleibt der Bootvorgang immer wieder hängen.

Mit der alten vom 07.10. funktioniert es. Ich will mir halt erstmal die Neuerungen ansehen, ohne neu zu flashen.

dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.35, My IP 192.168.1.41
debug: Sending TFTP-request for file C/dbox2/yadd/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 201612
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Feb 13 2003 - 23:37:17)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-18-16-25
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.1.35; our IP address is 192.168.1.4l 'C/dbox2/yadd/tftp
boot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1FD2E80 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.1.35; our IP address is 192.168.1.41
Filename 'C/dbox2/yadd/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #######
done
FB logo at: 0x0 (0x1FD2E80 bytes)
AVIA Frambuffer
Input: serial
Output: serial

Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
nokia bmon 1.0
debug mode is enabled
BOOTP broadcast 1
TFTP from server 192.168.1.35; our IP address is 192.168.1.41
Filename 'C/dbox2/yadd/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
#######################################################################
done
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 722641 Bytes = 705 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20-dbox2 (Homar@athlonmp) (gcc version 3.2.2) #2 Thu Apr 24 00
:24:14 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.1.35:C/dbox2
/yadd/cdkroot/ ip=192.168.1.41:192.168.1.3:
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 67 busfreq = 67
WARNING: NEW intfreq = 67000000 busfreq = 67000000
Decrementer Frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30632k available (1256k kernel code, 404k data, 76k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:18:16:25
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 loader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255Pig: Complete:
device=eth0, addr=192.168.1.41, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.1.41, domain=, nis-domain=(none),
bootserver=192.168.1.35, rootserver=192.168.1.35, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Looking up port of RPC 100003/2 on 192.168.1.35
Looking up port of RPC 100005/1 on 192.168.1.35
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 76k init
int started: BusyBox v0.61.pre (2003.04.23-19:46+0000) multi-caDetected STB:
Vendor: Nokia
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
event: init ...
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC
8xx I2C adapter](pos. 0).

***Adapter Desc: ZyAIR 100 Wireless PCMCIA
***MAC address: 00:A0:C5:15:28:1F Local IP: 192.168.1.35 (via Packet-Driver #0)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\dbox2\yadd\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 394 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\dbox2\yadd\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\dbox2\yadd\tftpboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\dbox2\yadd\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\dbox2\yadd\tftpboot\logo-fb"...
TFTP> Transfer finished, sent 69 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\dbox2\yadd\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\dbox2\yadd\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1412 blocks
1 - mountd: mount: path: C/dbox2/yadd/cdkroot/

Hat jemand eine Idee?

Buster