Warum hilft mir keiner!!!!!!!!!!!!!!!!!!!!!!!!!!!

Anlaufschwierigkeiten? Was ist was? Worum geht's?
DIbraimi
Interessierter
Interessierter
Beiträge: 34
Registriert: Sonntag 14. April 2002, 13:07

Warum hilft mir keiner!!!!!!!!!!!!!!!!!!!!!!!!!!!

Beitrag von DIbraimi »

beim Neuflashen bricht die box immer ab , er kommt nur soweit, kann jemand von euch da was erkennen:


jdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-65.fe.7f.07.00.00-59
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Mar 13 2003 - 12:11:32)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
=> bootp 120000 /C/alexW2xBaseimageV1.6.9.img
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
=> help
autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
bootm - boot application image from memory
bootp - boot image via network using BootP/TFTP protocol
bootd - boot default, i.e., run 'bootcmd'
cmp - memory compare
coninfo - print console devices and informations
cp - memory copy
crc32 - checksum calculation
echo - echo args to console
erase - erase FLASH memory
flinfo - print FLASH memory information
go - start application at address 'addr'
help - print online help
iminfo - print header information for application image
fsload - load binary file from a filesystem image
fsinfo - print information about filesystems
ls - list files in a directory (default /)
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
loop - infinite loop on address range
md - memory display
mm - memory modify (auto-incrementing)
mtest - simple RAM test
mw - memory write (fill)
nm - memory modify (constant address)
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
tftpboot- boot image via network using TFTP protocol
and env variables ipaddr and serverip
version - print monitor version
? - alias for 'help'
=> fsload
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635882 bytes loaded to 0x100000
=> mw
Usage:
mw - memory write (fill)

=> run
Usage:
run - run commands in an environment variable

=> bootp
=> boot
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635882 bytes loaded to 0x100000
## Booting image at 00120000 ...
Bad Magic Number
=> reset
debug: DDF: Calibrating delay loop... debug: DDF: 66.97 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-65.fe.7f.07.00.00-59
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Mar 13 2003 - 12:11:32)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
=> bootp 120000 /C/alexW2xBaseimageV1.6.9.img
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
masite
Erleuchteter
Erleuchteter
Beiträge: 649
Registriert: Donnerstag 7. März 2002, 21:11

Beitrag von masite »

DIbraimi
Interessierter
Interessierter
Beiträge: 34
Registriert: Sonntag 14. April 2002, 13:07

Beitrag von DIbraimi »

Ich danke dir, aber auch wennn ich mit pfeil nach oben und stand by resette kann ich einfach nciht flashen?????

Ich lauf noch ammok hier
zexma
Tuxboxer
Tuxboxer
Beiträge: 2067
Registriert: Mittwoch 6. März 2002, 15:29

Beitrag von zexma »

DIbraimi hat geschrieben:Ich danke dir, aber auch wennn ich mit pfeil nach oben und stand by resette kann ich einfach nciht flashen?????

Ich lauf noch ammok hier
Wo ist das LOG?
Link
Interessierter
Interessierter
Beiträge: 66
Registriert: Sonntag 6. April 2003, 16:13

Beitrag von Link »

Du musst die Pfeil nach oben Taste gedrück halten und zuvor den BM gestartet haben. Die box sollte dann im Debug hängen bleiben und du gibts beim BM "boot net" ein.