gcc3.3 Error

[HEAD]

/bin/install: cannot stat `powerpc-tuxbox-linux-gnu/libstdc++-v3/src/linker.map': No such file or directory
make: *** [.gcc] Error 1

[BenGay]

Ja, geht mir genauso.

[woglinde]

Hi,

was fuer systeme habt ihr? Ich habe von diesem Fehler bisher nur bei alten SuSen gehoert. Wird Zeit upzudaten. Warum sollte man nen Trabbi fahren, wenn man auch den Porsche bekommt?

Gruss Woglinde

[HEAD]

was fuer systeme habt ihr? Ich habe von diesem Fehler bisher nur bei alten SuSen gehoert. Wird Zeit upzudaten. Warum sollte man nen Trabbi fahren, wenn man auch den Porsche bekommt?

Ich glaube , ich fahre "Ferrari" (gentoo)

cu

[BenGay]

Ich habe ein Debian Woody Linux, aktueller Stand. CVS Head frisch gezogen. Vorher bei mir alles gelöscht. Dann folgendes:

make[5]: Entering directory `/home/bernd/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libib
erty'
make[6]: Entering directory `/home/bernd/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libib
erty/testsuite'
make[6]: Nothing to be for `all'.
make[6]: Leaving directory `/home/bernd/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libibe
rty/testsuite'
/bin/sh ../../../../gcc-3.3/libiberty/../mkinstalldirs /home/bernd/dbox2/cdk/powerpc-tuxbox-linux-gn
u/lib/`/home/bernd/tuxbox-cvs/cdk/build_gcc/gcc/xgcc -B/home/bernd/tuxbox-cvs/cdk/build_gcc/gcc/ -B/
home/bernd/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ -B/home/bernd/dbox2/cdk/powerpc-tuxbox-linux-gnu/
lib/ -isystem /home/bernd/dbox2/cdk/powerpc-tuxbox-linux-gnu/include -g -Os -msoft-float -fPIC -mst
rict-align -print-multi-os-directory`
/bin/sh /home/bernd/tuxbox-cvs/cdk/gcc-3.3/install-sh -c -m 644 libiberty.a /home/bernd/dbox2/cdk/po
werpc-tuxbox-linux-gnu/lib/`/home/bernd/tuxbox-cvs/cdk/build_gcc/gcc/xgcc -B/home/bernd/tuxbox-cvs/c
dk/build_gcc/gcc/ -B/home/bernd/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ -B/home/bernd/dbox2/cdk/powe
rpc-tuxbox-linux-gnu/lib/ -isystem /home/bernd/dbox2/cdk/powerpc-tuxbox-linux-gnu/include -g -Os -m
soft-float -fPIC -mstrict-align -print-multi-os-directory`/libiberty.an
( cd /home/bernd/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/`/home/bernd/tuxbox-cvs/cdk/build_gcc/gcc/xg
cc -B/home/bernd/tuxbox-cvs/cdk/build_gcc/gcc/ -B/home/bernd/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/
-B/home/bernd/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/ -isystem /home/bernd/dbox2/cdk/powerpc-tuxbox
-linux-gnu/include -g -Os -msoft-float -fPIC -mstrict-align -print-multi-os-directory` ; powerpc-tu
xbox-linux-gnu-ranlib libiberty.an )
mv -f /home/bernd/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/`/home/bernd/tuxbox-cvs/cdk/build_gcc/gcc/x
gcc -B/home/bernd/tuxbox-cvs/cdk/build_gcc/gcc/ -B/home/bernd/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin
/ -B/home/bernd/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/ -isystem /home/bernd/dbox2/cdk/powerpc-tuxbo
x-linux-gnu/include -g -Os -msoft-float -fPIC -mstrict-align -print-multi-os-directory`/libiberty.a
n /home/bernd/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/`/home/bernd/tuxbox-cvs/cdk/build_gcc/gcc/xgcc
-B/home/bernd/tuxbox-cvs/cdk/build_gcc/gcc/ -B/home/bernd/dbox2/cdk/powerpc-tuxbox-linux-gnu/bin/ -B
/home/bernd/dbox2/cdk/powerpc-tuxbox-linux-gnu/lib/ -isystem /home/bernd/dbox2/cdk/powerpc-tuxbox-li
nux-gnu/include -g -Os -msoft-float -fPIC -mstrict-align -print-multi-os-directory`/libiberty.a
make[6]: Entering directory `/home/bernd/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libib
erty/testsuite'
make[6]: Nothing to be for `install'.
make[6]: Leaving directory `/home/bernd/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libibe
rty/testsuite'
make[5]: Leaving directory `/home/bernd/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/nof/libibe
rty'
make[4]: Leaving directory `/home/bernd/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/libiberty'
make[4]: Entering directory `/home/bernd/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/libiberty
/testsuite'
make[4]: Nothing to be for `install'.
make[4]: Leaving directory `/home/bernd/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/libiberty/
testsuite'
make[3]: Leaving directory `/home/bernd/tuxbox-cvs/cdk/build_gcc/powerpc-tuxbox-linux-gnu/libiberty'
make[2]: Leaving directory `/home/bernd/tuxbox-cvs/cdk/build_gcc'
/usr/bin/install: cannot stat `powerpc-tuxbox-linux-gnu/libstdc++-v3/src/linker.map': No such file o
r directory
make[1]: *** [.gcc] Error 1
make[1]: Leaving directory `/home/bernd/tuxbox-cvs/cdk'
make: *** [/home/bernd/dbox2/cdkflash/.lib] Error 2

[DieMade]

Für SuSE-Geschädigte:

gcc 3.3 und gettext lokal bauen, dann läuft das cdk wieder durch (zumindest bis jetzt)

[HEAD]

von mir auch kleine workaround.
in rules-install-flash
TARGETNAME/libstdc++-v3/src/linker.map auf ../gcc-3.3/libstdc++-v3/config/linker-map.gnu ändern

cu

[woglinde]

Hi,

ah Problem liegt also mal wieder in den flash-optionen. Ich schaus mir heute abend mal an.

Gruss Woglinde

[DBOX-Freund]

So ich habe mal das komplett cdk neu geladen (HEAD), war mal wieder nötig
Mit dem fix kompiliert ja alles durch, habe mit

Code: Alles auswählen

./configure --prefix=/dbox2 --with-cvsdir=$HOME/tuxbox-cvs --enable-maintainer-mode --with-targetruleset=flash

gearbeitet.

Funkt auch soweit aber Sectionsd macht ein Segfault und der /tmp/zapit.soket will nicht. Log habe ich gerade nicht hier kann ich aber gerne posten.

Hat jemand evt. schon Erfolg?

axo nutze nur Neutrino


cu DBOX-Freund

[lucgas]

hab gerade ein fix eingecheckt,sagt bescheid obs hilft!

[gagga]

u-boot geht noch nicht:

Code: Alles auswählen

gcc -g  -I../include -I.. -DTEXT_BASE=0x40000 -DUSE_HOSTCC -c environment.c
gcc -Wall -pedantic -I../include -I.. -DTEXT_BASE=0x40000 -DUSE_HOSTCC -O -o envcrc envcrc.o crc32.o environment.o
make[3]: Entering directory `/export2/dbox2/tuxbox-cvs/boot/u-boot/tools/gdb'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/export2/dbox2/tuxbox-cvs/boot/u-boot/tools/gdb'
make[2]: Leaving directory `/export2/dbox2/tuxbox-cvs/boot/u-boot/tools'
make[2]: Entering directory `/export2/dbox2/tuxbox-cvs/boot/u-boot/lib_generic'
make[2]: *** No rule to make target `/export2/dbox2/dbox2/cdk/lib/gcc-lib/powerpc-tuxbox-linux-gnu/3.2.2/include/stdarg.h', needed by `crc32.o'.  Stop.
make[2]: Leaving directory `/export2/dbox2/tuxbox-cvs/boot/u-boot/lib_generic'
make[1]: *** [subdirs] Error 1
make[1]: Leaving directory `/export2/dbox2/tuxbox-cvs/boot/u-boot'
make: *** [.u-boot] Error 2

[alexW]

u-boot geht noch nicht

Also hier compilierts, aber viel funktioniert nicht gerade.. sectionsd macht einen segfault und zapit laesst sich erst gar nicht starten..

[obi]

Code: Alles auswählen

make[2]: *** No rule to make target `/export2/dbox2/dbox2/cdk/lib/gcc-lib/powerpc-tuxbox-linux-gnu/3.2.2/include/stdarg.h', needed by `crc32.o'.  Stop.

da steht ja auch 3.2.2
mach mal make distclean in $(cvs)/boot/u-boot/

[gagga]

[quote="obi]da steht ja auch 3.2.2
mach mal make distclean in $(cvs)/boot/u-boot/[/quote]

Grrmpf. Wer lesen kann ist mal wieder klar im Vorteil. Ich hatte make distclean schon in $(cvs)/cdk gemacht, aber anscheinend propagiert das nicht bis zu $(cvs)/boot/u-boot/

[obi]

jo, stimmt, habs im makefile gefixt. zwar ungetestet, sollte aber klappern

[HEAD]

Please press Enter to activate this console. [LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.166 2003/03/14 04:27:55 obi Exp $
caching 504 hours
events are old 60min after their end time
Segmentation fault
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.320 2003/06/03 08:27:01 digi_casi Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for readin.
[getservices] loading satellite positions...
satelliteName = Amos 1 4.0W, satellitePosition = -40
satelliteName = Arabsat 26.0E, satellitePosition = 260
satelliteName = Arabsat 30.5E, satellitePosition = 305
satelliteName = Astra 19.2E, satellitePosition = 192
satelliteName = Astra 1A, Sirius 2/3 5.0E, satellitePosition = 50
satelliteName = Astra 23.5E, satellitePosition = 235
satelliteName = Astra 28.2E, satellitePosition = 282
satelliteName = Eurasia-/Tuerksat 42.0E, satellitePosition = 420
satelliteName = Eutelsat 10.0E, satellitePosition = 100
satelliteName = Eutelsat 13.0E, satellitePosition = 130
satelliteName = Eutelsat 16.0E, satellitePosition = 160
satelliteName = Eutelsat 7.0E, satellitePosition = 70
satelliteName = Eutelsat 8.0W, satellitePosition = -80
satelliteName = HispaSat/PAS 30.0W, satellitePosition = -300
satelliteName = Intelsat 707, Thor 2/3 1.0W, satellitePosition = -10
satelliteName = Telstar12 15.0W, satellitePosition = -150
/var/tuxbox/config/zapit/services.xml: No such file or directory
$Id: controld.cpp,v 1.106 2003/04/23 13:00:12 alexw Exp $

[ConfigFile] Unable to open file /var/tuxbox/config/controld.conf for reading.
[controld] /var/tuxbox/config/controld.conf not found
[controld] Boxtype detected: (2, Philips D-BOX2)
set event: 00000009
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[nhttpd] Neutrino HTTP-Server starting..
[ConfigFile] Unable to open file /var/tuxbox/config/nhttpd.conf for reading.
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.466 2003/06/06 13:50:49 digi_casi E$

[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[ConfigFile] Unable to open file /var/tuxbox/config/neutrino.conf for reading.
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[ConfigFile] Unable to open file /var/tuxbox/config/scan.conf for reading.
[neutrino] Loading of scan settings failed. Using defaults.
[neutrino] menue setup
loading locales: scandir: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused

Der Fehler kommt nur mit gcc3.3.
Enigma-Head läuft