Startet nicht mehr!!!!

[dedi4u]

Hallo, ich habe
eine img von philips ein gespielt und jetzt startet die box nicht mehr, hilft mir!

Log:

FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x87D0F (0x1E00 bytes)
FB logo at: 0x80832 (0x74B5 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x807D6 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 526230 Bytes = 513 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #97 Mon Aug 27 17:52:09 CEST 2001
Boot arguments: ro root=/dev/mtdblock/3 console=ttyS0
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/mtdblock/3 console=ttyS0
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30792k available (960k kernel code, 392k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20376kB/6792kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:2d:8d:31
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var"
0x00160000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k int
init started: BusyBox v0.60.2 (2002.06.16-19:12+0000) multi-call Bad inittab en
try: ::restart:/sbin/init
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0x1978 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000004: 0x0100 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000000c: 0x0008 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x6b65 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000014: 0x656c in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000030: 0x0008 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000034: 0x2705 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000038: 0x4c04 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000003c: 0x3b8a in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000040: 0x0008 in
stead
Further such events for this erase block will not be printed
JFFS2: Erase block at 0x00000000 is not formatted. It will be erased
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020000: 0x3746 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020004: 0x9b5b in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020008: 0xed86 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002000c: 0xf2b7 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020010: 0xd727 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020014: 0xc727 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020018: 0x2f9e in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002001c: 0xafc4 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020020: 0x3a90 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020024: 0xb6ac in
stead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x0003da9c
You cannot use older JFFS2 filesystems with newer kernels
JFFS2: Erase block at 0x00020000 is not formatted. It will be erased
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040000: 0x5ef2 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040004: 0x3f3b in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040008: 0xcf4e in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004000c: 0xb3d3 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040010: 0xcff9 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040014: 0x56ce in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040018: 0x6316 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004001c: 0xa3f0 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040020: 0x0de6 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040024: 0xf19d in
stead
Further such events for this erase block will not be printed
JFFS2: Erase block at 0x00040000 is not formatted. It will be erased
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060000: 0xbd18 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060004: 0x0b1d in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060008: 0x8136 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006000c: 0x858c in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060010: 0xe91b in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060014: 0x8bc3 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060018: 0x1f63 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006001c: 0x73e4 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060020: 0x93c8 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060024: 0xd49d in
stead
Further such events for this erase block will not be printed
JFFS2: Erase block at 0x00060000 is not formatted. It will be erased
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080000: 0x7be9 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080004: 0x063a in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080008: 0x486f in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008000c: 0xdf8d in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080010: 0xc638 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080014: 0xb0e9 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080018: 0x61e1 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008001c: 0x29ee in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080020: 0x610b in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080024: 0x250c in
stead
Further such events for this erase block will not be printed
JFFS2: Erase block at 0x00080000 is not formatted. It will be erased
Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
mount: Mounting /dev/mtdblock/2 on /var failed: Invalid argument
mount: Mounting ramfs on /var/tmp failed: No such file or directory
Warning: loading /lib/modules/2.4.2/misc/rtc.o will taint the kernel: forced loa
d
Real Time Clock Driver v0.1
Warning: loading /lib/modules/2.4.2/kernel/drivers/i2c/i2c-core.o will taint the
kernel: forced load
i2c-core.o: i2c core module
Warning: loading /lib/modules/2.4.2/misc/i2c-8xx.o will taint the kernel: forced
load
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Warning: loading /lib/modules/2.4.2/misc/info.o will taint the kernel: forced lo
ad
Warning: loading /lib/modules/2.4.2/kernel/drivers/sound/soundcore.o will taint
the kernel: forced load
Warning: loading /lib/modules/2.4.2/kernel/drivers/input/input.o will taint the
kernel: forced load
Warning: loading /lib/modules/2.4.2/misc/event.o will taint the kernel: forced l
oad
event: init ...
Warning: loading /lib/modules/2.4.2/misc/avs.o will taint the kernel: forced loa
d
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
Warning: loading /lib/modules/2.4.2/misc/saa7126.o will taint the kernel: forced
load
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Warning: loading /lib/modules/2.4.2/misc/fp.o will taint the kernel: forced load

i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Warning: loading /lib/modules/2.4.2/misc/demux.o will taint the kernel: forced l
oad
Warning: loading /lib/modules/2.4.2/misc/dvbdev.o will taint the kernel: forced
load
Warning: loading /lib/modules/2.4.2/misc/avia.o will taint the kernel: forced lo
ad
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
Warning: loading /lib/modules/2.4.2/misc/cam.o will taint the kernel: forced loa
d
/lib/modules/2.4.2/misc/cam.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
Warning: loading /lib/modules/2.4.2/misc/dmxdev.o will taint the kernel: forced
load
Warning: loading /lib/modules/2.4.2/misc/dvb_frontend.o will taint the kernel: f
orced load
touch: /tmp/init: No such file or directory
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wait
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_command
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_rd
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_flush_pcr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_read_message
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_reset
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_gt_pcm_set_mpeg_attenuatio
n
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_write_message
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_gt_pcm_set_pcm_attenuation

/lib/modules/2.4.2/misc/dvb.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.

Warning: loading /lib/modules/2.4.2/kernel/drivers/input/keybdev.o will taint th
e kernel: forced load
Warning: loading /lib/modules/2.4.2/kernel/drivers/input/mousedev.o will taint t
he kernel: forced load
mouse0: PS/2 mouse device for input0
mice: PS/2 mouse device common for all mice
Warning: loading /lib/modules/2.4.2/kernel/drivers/input/joydev.o will taint the
kernel: forced load
Warning: loading /lib/modules/2.4.2/kernel/drivers/input/evdev.o will taint the
kernel: forced load
event0: Event device for input0
BusyBox v0.60.2 (2002.06.16-19:12+0000) multi-call binary

Usage: busybox [function] [arguments]...
or: [function] [arguments]...

BusyBox is a multi-call binary that combines many common Unix
utilities into a single executable. Most people will create a
link to busybox for each function they wish to use, and BusyBox
will act like whatever it was invoked as.

Currently defined functions:
[, ash, busybox, cat, chgrp, chmod, chown, clear, cp, date, dd,
df, dmesg, du, echo, env, false, find, grep, gunzip, gzip, halt,
hostname, ifconfig, init, kill, killall, klogd, ln, ls, mkdir,
more, mount, mv, nslookup, ping, ps, pwd, reboot, reset, rm, rmdir,
route, sed, sh, sleep, sync, syslogd, tail, tar, test, touch,
true, umount, uname, uptime, vi, wget, which, xargs, yes, zcat

[Zahni]

Das Image/Flashinhalt ist kaputt. Außerdem ist das Image uralt:

-> http://dboxupdate.berlios.de

-Zahni

[dedi4u]

Das Image/Flashinhalt ist kaputt. Außerdem ist das Image uralt:

-> http://dboxupdate.berlios.de

-Zahni

wie kann ich es wieder in ordnung bringen???

[Zahni]

Link anklicken, richtigen Basisimage flashen, dann cdk.cramfs und ucodes nach Anweisung einspielen. Steht doch alles da ?!?!

-Zahni

[eule]

You cannot use older JFFS2 filesystems with newer kernels

steht fast im Klartext dort.... neu flashen mit dem passenden (1x oder 2x) Baseimage und cdk.cramfs von http://dboxupdate.berlios.de/

Anleitung unter http://tuxbox.berlios.de/forum/viewtopic.php?t=15672

[dedi4u]

Link anklicken, richtigen Basisimage flashen, dann cdk.cramfs und ucodes nach Anweisung einspielen. Steht doch alles da ?!?!

-Zahni

ja aber mit den bootmanager geht es ja nicht und über ftp komme ich auch nicht mehr rein, wieso?

danke

[dedi4u]

Link anklicken, richtigen Basisimage flashen, dann cdk.cramfs und ucodes nach Anweisung einspielen. Steht doch alles da ?!?!

-Zahni

ja aber mit den bootmanager geht es ja nicht und über ftp komme ich auch nicht mehr rein, wieso?

danke

Error 10048....... was nun?

[Zahni]

Man nehme: die Suchfunktion.

-Zahni

[eule]

den Bootmanager starten und einen erweiterten Speichertest bei der Box auslösen.

Wie das geht?

Man drücke die Tasten "Standby" und "Pfeil oben" gleichzeitig, lasse die "Standby" Taste wieder los und behält die Taste "Pfeil oben" noch ein zwei Sekunden gedrückt!

Wenn alles stehen bleibt, 'boot net' (ohne die ') in die serielle Konsole eintippen.

Dann gehts auch mit dem Bootmanager.

[Zahni]

@ Eule: Nö. Nicht bei diesem Fehler.

-Zahni

[eule]

@ Zahni

Hast recht... kommt davon, wenn man den Leuten alles aus der Nase popeln muss.... (und das bei einem Bayern.. Bah....)

[dedi4u]

@ Zahni

Hast recht... kommt davon, wenn man den Leuten alles aus der Nase popeln muss.... (und das bei einem Bayern.. Bah....)

Last mal die bayern in ruhe und helft mir bitte was muss ich machen um 1.6.9 zu flaschen mit botmanager. pc= 192.168.0.1 dbox=192.168.0.2. <--> CrossOver!

Danke!!

[rasc]

Also, das ist eigentlich ganz einfach:

- Anleitung vom dbox2-Bootmanager lesen
- Anleitung auf dboxupdate.berlios.de lesen (da gibt es auch die Images)
- Anleitungen befolgen

- Bei Problemen: FAQ hier im Board lesen (z.B. haeufigste Fehler beim Flashen). Dort gibt es Links auf die einzelnen Probleme.

- Wenn das alles nicht gehen sollte (was eigentlich nur bei defekten Boxen passiert), hier mit detaillierter Fehlerbeschreibung, und Boot-LOG melden und was exakt gemacht wurde.

Der Aufwand ist nicht hoch, aber man muss sich halt ne halbe Stunde Zeit nehmen die Anleitungen auch zu lesen. Das geht schneller, als hier tagelang im Board auf eine Antwort zu warten.

[dedi4u]

Also, das ist eigentlich ganz einfach:

- Anleitung vom dbox2-Bootmanager lesen
- Anleitung auf dboxupdate.berlios.de lesen (da gibt es auch die Images)
- Anleitungen befolgen

- Bei Problemen: FAQ hier im Board lesen (z.B. haeufigste Fehler beim Flashen). Dort gibt es Links auf die einzelnen Probleme.

- Wenn das alles nicht gehen sollte (was eigentlich nur bei defekten Boxen passiert), hier mit detaillierter Fehlerbeschreibung, und Boot-LOG melden und was exakt gemacht wurde.

Der Aufwand ist nicht hoch, aber man muss sich halt ne halbe Stunde Zeit nehmen die Anleitungen auch zu lesen. Das geht schneller, als hier tagelang im Board auf eine Antwort zu warten.

Habs irgendwie hin bekommen aber mit WIN ME, mit xp ging es nicht richtig aber danke!

Gruss!