keine Sender auf Nokia Kabelbox

Anlaufschwierigkeiten? Was ist was? Worum geht's?
Forumsregeln
uwilie
Interessierter
Interessierter
Beiträge: 24
Registriert: Montag 4. August 2003, 13:16

keine Sender auf Nokia Kabelbox

Beitrag von uwilie »

Hallo Leute,
ich weiss,dass das Thema schon zig mal angesprochen wurde, aber es gab bisher aus meiner Sicht noch keine brauchbare Lösung.
Ich habe eine Nokia Kabel-Box mit 2x Intel Flash. Ich starte mit dem aktuellen Yadd von Alex. Bis hierher läuft alles prima. Allerding werden keine Sender bei der Sendersuche gefunden.
Habe schon alles mögliche ausprobiert. Original Ucodes, neu Ucode.bin, keine Ucode.bin. Hab auch die cables.xml mit den werten unsres Kabels gefüttert - kein Erfolg. Auch mit Enigma den manuellen Suchlauf probiert - hat nichts gebracht.
Ältere Yadds versucht - gleicher Effekt!
Sobald BetaNova gestartet wird geht alles. Hab auch in BetaNova den manuellen Suchlauf gestartet, um die Transponderwerte unseres Kabels zu prüfen - alles ok.
So, jetzt die Frage auf die es keine Antwort zu geben scheint - wo liegt das Problem? Bin für alle Anregungen sehr dankbar!
Nach oben
Zahni
Tuxboxer
Tuxboxer
Beiträge: 2227
Registriert: Freitag 24. Mai 2002, 10:38

Beitrag von Zahni »

Also:

aktuelles Image von AlexW (Release, 22.07.2003) unter Enigma: Automatischer Suchlauf (Telekom) geht Einwandfrei (interne ucode.bin ) .

Box: Nokia Kabel, Avia 500.

Neutrino nicht getestet.

-Zahni
Für den IE:

<html>
<form>
<input type crash>
</form>
</html>
Nach oben
JimWest
Interessierter
Interessierter
Beiträge: 35
Registriert: Samstag 12. Juli 2003, 15:09

Beitrag von JimWest »

Hatte ein änliches Problem hab dann die Hastra angerufen die wusste einen Ausweg und zwar sollte ich doch mal die 00001 als Transponder nehmen.
Und siehe da Pro7 MtV2 und Rtl gingen auch über Kabel(haha Telekom wohl keine Privaten einspeisen wie?).
Nach oben
uwilie
Interessierter
Interessierter
Beiträge: 24
Registriert: Montag 4. August 2003, 13:16

Beitrag von uwilie »

Hallo Leute,
erst mal danke für die Posts. Hab auch schon das aktuelle Image probiert - ging leider nicht. Ich habe eine Nokia-Box mit Avia 600. Wie schon gesagt - alles probiert - keine Sender. Kann es vielleicht an bestimmten Chipsätzen liegen? Bin langsam am Verzweifeln.
Vor allem stört mich, dass BN alles ohne Probleme findet. Hat Linux da irgendein Problem??? Oder vielleicht ich :roll: ???
Für weitere Posts wäre ich sehr dankbar!!
Nach oben
mash4077
Tuxboxer
Tuxboxer
Beiträge: 4654
Registriert: Samstag 27. April 2002, 13:19

Beitrag von mash4077 »

Hi,

poste doch mal ein Bootlog mit Senderscan.
Vielleicht kann einer der Profis was erkennen.

Gruß
mash
Nach oben
uwilie
Interessierter
Interessierter
Beiträge: 24
Registriert: Montag 4. August 2003, 13:16

Beitrag von uwilie »

Hallo da drausen,
nachdem ich meine Wohnung komplett umgebaut habe, um zu einem Bootlog zu kommen :lol: , hier also selbiges mit bruteforce Senderscan.
Die Frequenzen zwischen 354 MHz und 442 MHz, die da gefunden werden sind genau die, auf denen unsere Digitalpakete im Kabel zu finden sind. Die Symbolrate liegt lt. Kabelbetreiber bei 6,875 und die Modulation bei 64 QAM.
So das ist jetzt alles was ich weiss - ich hoffe die Fachleute wissen mehr!

CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:45:0f:7e
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'Using /lib/modules/2.4.2
1-dbox2/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.21-dbox2/misc/info.o
SIOCADDRT: Invalid argument
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
Using /lib/modules/2.4.21-dbox2/misc/event.o
event: init ...
Using /lib/modules/2.4.21-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Using /lib/modules/2.4.21-dbox2/misc/saa7126.o
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [](pos. 1).
Using /lib/modules/2.4.21-dbox2/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.21-dbox2/misc/dvb_demux.o
Using /lib/modules/2.4.21-dbox2/misc/dvbdev.o
Using /lib/modules/2.4.21-dbox2/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
Using /lib/modules/2.4.21-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...write 1 event's ...
write 1 event's ...
OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
Using /lib/modules/2.4.21-dbox2/misc/cam.o
der moment ist gekommen...
Oops: kernel access of bad area, sig: 11
NIP: C000AD64 XER: 00000000 LR: C38A2898 SP: C1D03E30 REGS: c1d03d80 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: C38E6000, DSISR: C0000000
TASK = c1d02000[42] 'insmod' Last syscall: 6
last math 00000000 last altivec 00000000
GPR00: 00000000 C1D03E30 C1D02000 C38A6000 C38E5FFC 00020000 C38C4FFC 00040000
GPR08: 00000000 C38A0000 C3880000 C000AD48 0000000D 10062388 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01D03F40 C1D03EA8 10071194
GPR24: C1A28000 C01F4E80 C0140000 C38C7000 C0140000 0002E630 FFFFFFFF FF0009C0
Call backtrace:
C38A2878 C38A2BA0 C38A3188 C0010588 C00025DC 10016218 100173AC
10003C2C 10003848 0FEF8B30 00000000
Segmentation fault
Using /lib/modules/2.4.21-dbox2/misc/dmxdev.o
Using /lib/modules/2.4.21-dbox2/misc/dvb_frontend.o
Using /lib/modules/2.4.21-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.2 2003/07/22 08:01:56 alexw Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.5 2003/06/04 11:04:45 alexw Exp $
avia_gt_dmx: No firmware found at /var/tuxbox/ucodes/ucode.bin, using compiled-i
n version.
avia_gt_dmx: Successfully loaded ucode V0.14
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.4 2003/07/22 08:01:56 alexw Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.21-dbox2/misc/dvb.o
dvb.c: init_dvb
Init VES1820
Using /lib/modules/2.4.21-dbox2/misc/ves1820.o
$Id: ves1820.c,v 1.34 2002/10/08 23:18:42 obi Exp $
i2c-core.o: driver VES1820 DVB-C Demodulator registered.
VES1820: attaching VES1820 at 0x10
i2c-core.o: client [VES1820] registered to adapter [](pos. 3).
VES1820: attached to adapter

Using /lib/modules/2.4.21-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp
$
avia_gt_napi: hardware section filtering enabled.
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.6 2003/07/22 08:01:56 alexw Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
CXA2092 found
CXA2092 found
cdkVcInfo $Id: cdkVcInfo.c,v 1.4 2003/07/22 08:33:41 alexW Exp $

$Id: sectionsd.cpp,v 1.167 2003/06/18 12:19:23 alexw Exp $
caching 504 hours
events are old 60min after their end time
$Id: zapit.cpp,v 1.290.2.50 2003/06/13 10:53:15 digi_casi Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading
.
/var/tuxbox/config/zapit/services.xml: No such file or directory
$Id: controld.cpp,v 1.107 2003/06/26 05:08:58 alexw Exp $

[ConfigFile] Unable to open file /var/tuxbox/config/controld.conf for reading.
[controld] /var/tuxbox/config/controld.conf not found
[controld] Boxtype detected: (1)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[ConfigFile] Unable to open file /var/tuxbox/config/nhttpd.conf for reading.
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.477 2003/07/16 08:58:13 thegoodguy E
xp $

[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[ConfigFile] Unable to open file /var/tuxbox/config/neutrino.conf for reading.
[ConfigFile] Unable to open file /var/tuxbox/config/scan.conf for reading.
[neutrino] Loading of scan settings failed. Using defaults.
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
open: No such file or directory
[neutrino] initialized everything
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[scan] scanning provider: cable bruteforce
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] FE_COMPLETION_EV: freq 161000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] FE_COMPLETION_EV: freq 354000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 362000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 370000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 378000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 386000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 394000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 402000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 410000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 418000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] FE_COMPLETION_EV: freq 434000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 442000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
/var/tuxbox/config/zapit/bouquets.xml: No such file or directory
Nach oben
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

der moment ist gekommen...
Oops: kernel access of bad area, sig: 11
NIP: C000AD64 XER: 00000000 LR: C38A2898 SP: C1D03E30 REGS: c1d03d80 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: C38E6000, DSISR: C0000000
TASK = c1d02000[42] 'insmod' Last syscall: 6
last math 00000000 last altivec 00000000
GPR00: 00000000 C1D03E30 C1D02000 C38A6000 C38E5FFC 00020000 C38C4FFC 00040000
GPR08: 00000000 C38A0000 C3880000 C000AD48 0000000D 10062388 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01D03F40 C1D03EA8 10071194
GPR24: C1A28000 C01F4E80 C0140000 C38C7000 C0140000 0002E630 FFFFFFFF FF0009C0
Call backtrace:
C38A2878 C38A2BA0 C38A3188 C0010588 C00025DC 10016218 100173AC
10003C2C 10003848 0FEF8B30 00000000
Segmentation fault
Da ist wohl was mit der Hardware faul. Die Box kann den Cam-Treiber nicht laden.
There are 10 types of people in the world: those who know binary and those who don't
Nach oben
uwilie
Interessierter
Interessierter
Beiträge: 24
Registriert: Montag 4. August 2003, 13:16

Beitrag von uwilie »

Die Hardware geht unter BN aber ziemlich gut :(
Nach oben
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Das ist ärgerlich, aber der Fehler lässt sich nicht mit "ja, aber" wegdiskutieren ;)
There are 10 types of people in the world: those who know binary and those who don't
Nach oben
uwilie
Interessierter
Interessierter
Beiträge: 24
Registriert: Montag 4. August 2003, 13:16

Beitrag von uwilie »

Die cam-alpha.bin wird bei der Überprüfung als "unknown" bezeichnet. Hab irgendwo im Forum aber mal gelesen, dass das kein Problem ist, weil sie einfach zu neu für neutrino ist. Kann das sein?
Nach oben
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Nö, das gilt nur für den Bootmanager. Da wird die cam-alpha nicht OK sein. Siehe http://www.dietmar-h.net/ucodes.html

cam-alpha.bin muß exakt 131.072 Byte groß sein.
There are 10 types of people in the world: those who know binary and those who don't
Nach oben
uwilie
Interessierter
Interessierter
Beiträge: 24
Registriert: Montag 4. August 2003, 13:16

Beitrag von uwilie »

Jo, da ist was faul. Meine hat nur 126226 Byte. Komisch, beim Extrahieren kommt aber kein Fehler. Was ist zu tun?
Nach oben
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Hmmm. BN zurück, Softwareupdate machen, neu auslesen und daraus die uCodes nehmen.
There are 10 types of people in the world: those who know binary and those who don't
Nach oben
uwilie
Interessierter
Interessierter
Beiträge: 24
Registriert: Montag 4. August 2003, 13:16

Beitrag von uwilie »

Ok, das versuch ich mal. Danke erst mal für die Hilfe!
Nach oben
uwilie
Interessierter
Interessierter
Beiträge: 24
Registriert: Montag 4. August 2003, 13:16

Beitrag von uwilie »

Hallo Profis,
nachdem es mir mit viel Mühe gelungen ist die cam-alpha in der richtigen Größe zu extrahieren (übrigens mit den BN-Utils im Bootmanager gings nicht - nur über RSH) - hab ich nochmal neu geflasht - was soll ich sagen, der selbe Effekt. Ich schick nochmal das neue Boot-Log mit - vielleicht ist noch was zu sehen. Dann schlaft mal schön - bis morgen 8)

### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 640967 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 640903 Bytes = 625.9 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.21-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Son Jul 6 12:22:55 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30804k available (1128k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:45:0f:7e
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'Using /lib/modules/2.4.2
1-dbox2/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.21-dbox2/misc/info.o
i2c-core.o: driver FOR_PROBE_ONLY registered.
SIOCADDRT: Invalid argument
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
Using /lib/modules/2.4.21-dbox2/misc/event.o
event: init ...
Using /lib/modules/2.4.21-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Using /lib/modules/2.4.21-dbox2/misc/saa7126.o
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [](pos. 1).
Using /lib/modules/2.4.21-dbox2/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.21-dbox2/misc/dvb_demux.o
Using /lib/modules/2.4.21-dbox2/misc/dvbdev.o
Using /lib/modules/2.4.21-dbox2/misc/avia.o
Using /lib/modules/2.4.21-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
write 1 event's ...
write 1 event's ...
Using /lib/modules/2.4.21-dbox2/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.21-dbox2/misc/dmxdev.o
Using /lib/modules/2.4.21-dbox2/misc/dvb_frontend.o
Using /lib/modules/2.4.21-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.2 2003/07/22 08:01:56 alexw Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.5 2003/06/04 11:04:45 alexw Exp $
avia_gt_dmx: Successfully loaded ucode V0.1A
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.4 2003/07/22 08:01:56 alexw Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.21-dbox2/misc/dvb.o
dvb.c: init_dvb
Init VES1820
Using /lib/modules/2.4.21-dbox2/misc/ves1820.o
$Id: ves1820.c,v 1.34 2002/10/08 23:18:42 obi Exp $
i2c-core.o: driver VES1820 DVB-C Demodulator registered.
VES1820: attaching VES1820 at 0x10
i2c-core.o: client [VES1820] registered to adapter [](pos. 4).
VES1820: attached to adapter

Using /lib/modules/2.4.21-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp
$
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.6 2003/07/22 08:01:56 alexw Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.21-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
CXA2092 found
CXA2092 found
cdkVcInfo $Id: cdkVcInfo.c,v 1.4 2003/07/22 08:33:41 alexW Exp $

$Id: sectionsd.cpp,v 1.167 2003/06/18 12:19:23 alexw Exp $
caching 504 hours
events are old 60min after their end time
[camd] Unknown 1.CMD-Class 03
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.290.2.50 2003/06/13 10:53:15 digi_casi Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading
.
/var/tuxbox/config/zapit/services.xml: No such file or directory
$Id: controld.cpp,v 1.107 2003/06/26 05:08:58 alexw Exp $

[ConfigFile] Unable to open file /var/tuxbox/config/controld.conf for reading.
[controld] /var/tuxbox/config/controld.conf not found
[controld] Boxtype detected: (1)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
[camd] no card is in slot #2
[camd] a card is in slot #1
[ConfigFile] Unable to open file /var/tuxbox/config/nhttpd.conf for reading.
[camd] no card is in slot #2
[camd] a card is in slot #1
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.477 2003/07/16 08:58:13 thegoodguy E
xp $

[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[ConfigFile] Unable to open file /var/tuxbox/config/neutrino.conf for reading.
[ConfigFile] Unable to open file /var/tuxbox/config/scan.conf for reading.
[neutrino] Loading of scan settings failed. Using defaults.
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
open: No such file or directory
[neutrino] initialized everything
[sectionsd] getUTC: read: Connection timed out
/bin/neutrino: /var/tuxbox/ucodes/avia500.ux: No such file or directory
[sectionsd] getUTC: read: Connection timed out
[scan] scanning provider: cable bruteforce
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] FE_COMPLETION_EV: freq 161000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] FE_COMPLETION_EV: freq 225000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] FE_COMPLETION_EV: freq 354000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 362000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 370000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 378000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 386000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 394000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 402000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 410000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 418000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] FE_COMPLETION_EV: freq 434000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] FE_COMPLETION_EV: freq 442000
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
[CFrontend::getEvent] timeout
Nach oben
uwilie
Interessierter
Interessierter
Beiträge: 24
Registriert: Montag 4. August 2003, 13:16

Beitrag von uwilie »

Hallo Leute,
konnte doch noch nicht schlafen und hab aus lauter Verzweiflung mal die ucode.bin gelöscht. Und was soll ich sagen es geht alles. Ich habe tatsächlich alle Sender gefunden. Jubel Jubel!
Also nochmal danke für die Tipps - und jetzt endgültig Gute Nacht! :wink:
Nach oben

Zurück zu „Anfängerfragen“