habe ein Problem mit den neuen Yadds (Yadd Head ab Juli 2003). Beim Booten "Loopt" die Box ständig. Mit dem Yadd vom April 2003 geht noch alles. Könnt ihr mir weiterhelfen?
Die Daten der Box: Nokia Kabel 2x, Avia600
Für eure Hilfe wäre ich sehr dankbar!
Hier noch das Boot-Log mit dem Fehler:
ppcboot 0.6.4 (Feb 6 2003 - 21:20:33)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-45-0f-7e
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 10.0.0.2; our IP address is 10.0.0.24
Filename 'C/yadd3/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1FD2E80 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 10.0.0.2; our IP address is 10.0.0.24
Filename 'C/yadd3/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###

FB logo at: 0x0 (0x1FD2E80 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
nokia bmon 1.2
debug mode is enabled
BOOTP broadcast 1
TFTP from server 10.0.0.2; our IP address is 10.0.0.24
Filename 'C/yadd3/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
######################################################################

## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 721692 Bytes = 704 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-82.fa.7f.07.00.00-ea
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 10.0.0.2, My IP 10.0.0.24
debug: Sending TFTP-request for file C/yadd3/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 201612
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Feb 6 2003 - 21:20:33)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-45-0f-7e
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 10.0.0.2; our IP address is 10.0.0.24
Filename 'C/yadd3/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1FD2E80 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 10.0.0.2; our IP address is 10.0.0.24
Filename 'C/yadd3/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###

FB logo at: 0x0 (0x1FD2E80 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
nokia bmon 1.2
debug mode is enabled
BOOTP broadcast 1
TFTP from server 10.0.0.2; our IP address is 10.0.0.24
Filename 'C/yadd3/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
######################################################################

## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 721692 Bytes = 704 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-82.fa.7f.07.00.00-ea
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 10.0.0.2, My IP 10.0.0.24
debug: Sending TFTP-request for file C/yadd3/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 201612
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Feb 6 2003 - 21:20:33)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-45-0f-7e
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 10.0.0.2; our IP address is 10.0.0.24
Filename 'C/yadd3/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1FD2E80 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 10.0.0.2; our IP address is 10.0.0.24
Filename 'C/yadd3/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###

FB logo at: 0x0 (0x1FD2E80 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
nokia bmon 1.2
debug mode is enabled
BOOTP broadcast 1
TFTP from server 10.0.0.2; our IP address is 10.0.0.24
Filename 'C/yadd3/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
######################################################################

## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 721692 Bytes = 704 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-82.fa.7f.07.00.00-ea
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 10.0.0.2, My IP 10.0.0.24
debug: Sending TFTP-request for file C/yadd3/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 201612
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Feb 6 2003 - 21:20:33)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-45-0f-7e
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 10.0.0.2; our IP address is 10.0.0.24
Filename 'C/yadd3/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1FD2E80 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 10.0.0.2; our IP address is 10.0.0.24
Filename 'C/yadd3/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###

FB logo at: 0x0 (0x1FD2E80 bytes)