HALS! ich kill meine yadds

moinsen
ich hab am WE den dbug enabled und just zum 3 mal (das entspricht einem schnitt von 1 mal pro tag) mein yadd neu entpackt
ich (bzw meine box) schaffe/t es ständig, das aktuelle yadd zu schrotten
das hat utnerschiedliche ausmaße
- mal kann ich keinen einzigen kanal mehr gucken
- mal bringt das yadd den bootmanager mitten im boot net vorgang zum absturz (aber so richtig, mit 10 mio fenstern...)
- oder so wie jetzt, dass er irgend ne datei nich mehr findet und mitten im booten plötzlich aufhört mit demselbigen

jetz meine frage: was darf ich schreibgeschützt setzen auf der platte, bzw was nicht
keine lust mehr, dass hier andauernd was den bach runtergeht...

mfg TheComing

maaaaaan, so langsam reichts
grade ist der bootman mal wieder abgekackt und ein anderes mal wurde mit hickhack abgebrochen
irgendwas läuft hier gewaltig schief:
netlog:

***Adapter Desc: NVIDIA nForce MCP Networking Adapter Driver (Microsoft's Packet Scheduler)
***MAC address: blabla Local IP: 192.168.0.1 (via Packet-Driver #1)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "G:\dbox\yadds\AlexW1609Snap\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 399 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "G\dbox\yadds\AlexW1609Snap\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "G:\dbox\yadds\AlexW1609Snap\tftpboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "G\dbox\yadds\AlexW1609Snap\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "G:\dbox\yadds\AlexW1609Snap\tftpboot\logo-fb"...
TFTP> Transfer finished, sent 139 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "G\dbox\yadds\AlexW1609Snap\tftpboot\kernel-yadd"
TFTP> Started TFTP-Transfer for "G:\dbox\yadds\AlexW1609Snap\tftpboot\kernel-yadd"...
TFTP> Transfer finished, sent 1289 blocks
BootP> Answer sent!
1 - mountd: mount: path: G/dbox/yadds/AlexW1609Snap/yaddroot/
0 - nfsd: NFS_READ: cannot send reply
weitere 40 mal:0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: NFS_READ: cannot send reply
0 - nfsd: getattr: cannot send reply
weitere 80 mal: 0 - nfsd: NFS_READ: cannot send reply

dann einmal ein "kaputtes" comlog von nem aufgehängten bootversuch

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01bla
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26218, &_data 0x26218, &_edata 0x29d08
debug: &_end 0x34894, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.145
debug: Sending TFTP-request for file G/dbox/yadds/AlexW1609Snap/tftpboot/ppcboot

will verify ELF image, start= 0x800000, size= 204200
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

ppcboot 0.6.4 (Jun 24 2002 - 20:39:15)

Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: bla
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.145
Filename 'G/dbox/yadds/AlexW1609Snap/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1FD2814 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.145
Filename 'G/dbox/yadds/AlexW1609Snap/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ##############

FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial

1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.145
Filename 'G/dbox/yadds/AlexW1609Snap/tftpboot/kernel-yadd'.
Load address: 0x100000
Loading: #######################################################################
##########################################################

## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 659670 Bytes = 644 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.22-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Son Sep 7 12:12:49 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ip=bootp root=/dev/nfs rw nfsroot=192.168.0.1
:G/dbox/yadds/AlexW1609Snap/yaddroot/
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 67 busfreq = 67
WARNING: NEW intfreq = 67000000 busfreq = 67000000
Decrementer Frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30788k available (1128k kernel code, 384k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, bla
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 bucO<4>:opsr ke neleaccoss af brd a ea,:sig

NI0: C20CFX80 ER:0800F0F7: LR0 C06CF2P0 S1: CBFEFR90 :EGSf c1eefaR0 T AP:0030
Notntai
MS0: 00009E32 1E: : PRF 0 0P: : MEI 1 RR/D1: 1A
D1R: 3078,453I DS SR:00008000A
T=SK f c10ee0]0[1w 'seappLr' astcsys:all0 12l
asthmat0 000000a0 last vlti0ec 0000
GP 00:CC000F26F C19EFB10 C0FEE000 1000 000672D57A5B 0AD91E02 01002C37 61F6 400P
G:R087 10D83307 C0190000 0000 0148C01C81E3 553F5F09 0B0310FC 31FE 40000000000G
9 R1F: FFFFF0FF 0000 000F0070FF07 00CFFE00 00001C32 0016 000EC1F8FC60 001001
2GPRC4: 8014 C404C0188C6F C1857000 00000C02 61F6 40000000000A C0080001 C0A80
91
Caal brckt:aceC
C 0C 260DC0082010 C09D1B08 C30C3C14 300C 4C0CC00C3620 C0714B
0C0083AA0 C0002808 00100040 9000 0320C000F860 C0D0F800 C900F
C060FD04 CC00FC20 2015 FC85C0103281 C0B53A04 C5149CF0 9014 63400 0
C2002C7C 4000 D80e
Klrnen pa ic:eAiei, knlling irter uptdhan!lern
It inuerrhpt land-er t non sygcin<
e0>Rtboo ing1in s80 neco.ds.

man beachte besonders den hickhack in den letzten 2 absätzen

und jetzt noch das comlog der aktuellen (noch funzenden sitzung)

BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.145
debug: Sending TFTP-request for file G/dbox/yadds/AlexW1609Snap/tftpboot/ppcboot

will verify ELF image, start= 0x800000, size= 204200
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

ppcboot 0.6.4 (Jun 24 2002 - 20:39:15)

Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: bla
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.145
Filename 'G/dbox/yadds/AlexW1609Snap/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1FD2814 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.145
Filename 'G/dbox/yadds/AlexW1609Snap/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ##############

FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial

1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.145
Filename 'G/dbox/yadds/AlexW1609Snap/tftpboot/kernel-yadd'.
Load address: 0x100000
Loading: #######################################################################
##########################################################

## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 659670 Bytes = 644 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.22-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Son Sep 7 12:12:49 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ip=bootp root=/dev/nfs rw nfsroot=192.168.0.1
:G/dbox/yadds/AlexW1609Snap/yaddroot/
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 67 busfreq = 67
WARNING: NEW intfreq = 67000000 busfreq = 67000000
Decrementer Frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30788k available (1128k kernel code, 384k data, 68k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, bla
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests . OK
IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.145
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.145, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.145, domain=, nis-domain=(none),
bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.1
Looking up port of RPC 100005/1 on 192.168.0.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k init
Starting pid 11, console /dev/console: '/etc/init.d/rcS'Using /lib/modules/2.4.2
2-dbox2/misc/event.o
event: $Id: event.c,v 1.11 2003/09/08 22:38:56 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.22-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.22-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC
8xx I2C adapter](pos. 0).
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.22-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [PowerPC 8xx I2C adapter](pos
. 1).
Using /lib/modules/2.4.22-dbox2/misc/saa7126.o
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos
. 2).
Using /lib/modules/2.4.22-dbox2/misc/cam.o
$Id: cam.c,v 1.24 2003/09/08 23:16:17 obi Exp $
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [PowerPC 8xx I2C adapter](p
os. 3).
CAM: attached to adapter PowerPC 8xx I2C adapter
Using /lib/modules/2.4.22-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.22-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.16 2003/07/24 01:59:22 homar Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
i2c-core.o: driver DVB I2C bridge registered.
i2c-core.o: client [dvb] registered to adapter [PowerPC 8xx I2C adapter](pos. 4)
.
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.22-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.7 2003/09/11 23:22:47 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.22-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.75 2003/09/12 04:46:54 obi Exp $
avia_av_event: $Id: avia_av_event.c,v 1.10 2003/07/24 01:59:21 homar Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.10 2003/07/24 01:59:21 homar Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.41 2003/09/12 04:41:15 obi Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.23 2003/08/01 17:31:22 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.18 2003/08/01 17:31:21 obi Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.187 2003/09/12 02:46:30 obi Exp $
avia_gt_dmx: loaded ucode vB107
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.34 2003/08/01 17:31:22 obi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.27 2003/09/12 04:41:16 obi Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.30 2003/08/01 17:31:21 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.39 2003/08/01 17:31:22 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.50 2003/09/13 02:45:12 obi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.13 2003/08/01 17:31:22 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.29 2003/09/12 04:41:16 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.22 2003/08/01 17:31:22 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.11 2003/08/01 17:31:22 obi Exp $
avia_gt_core: masking unhandled irq reg 0 bit 6
Using /lib/modules/2.4.22-dbox2/misc/ves1820.o
Using /lib/modules/2.4.22-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1893)...
Using /lib/modules/2.4.22-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.25 2003/09/12 03:01:51 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.187 2003/09/11 23:22:48 obi Exp $
cdkVcInfo $Id: cdkVcInfo.c,v 1.5 2003/09/11 13:26:25 alexW Exp $

Using /lib/modules/2.4.22-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
$Id: sectionsd.cpp,v 1.167 2003/06/18 12:19:23 alexw Exp $
caching 504 hours
events are old 60min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.326 2003/06/23 19:57:37 obi Exp $
avia_gt_core: masking unhandled irq reg 0 bit 7
[camd] no card is in slot #2
[camd] a card is in slot #1
[cdkVcInfo] Version (Yadd): 1106200309160933
[camd] no card is in slot #2
[camd] a card is in slot #1
$Id: controld.cpp,v 1.108 2003/08/26 20:13:55 zwen Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[camd] no card is in slot #2
[camd] a card is in slot #1
[nhttpd] Neutrino HTTP-Server starting..
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[neutrino] vcrControl Instance created
CVCRControl registered new serverdevice: ngrab
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] control event register
[neutrino] sectionsd event register
[neutrino] zapit event register
[neutrino] timerd event register
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
[camd] set emm caid 1702 capid 1000
[camd] starting onid 0085 sid 000b
[camd] set emm caid 1702 capid 1000
descramble onid: 0085 sid: 000b status: 1d1d
(event.event == EVENT_ARATIO_CHANGE 0 -> 3)
avia_gt_core: masking unhandled irq reg 1 bit 15
[basicsocket] send_data: Resource temporarily unavailable
(event.event == EVENT_ARATIO_CHANGE 3 -> 2)
request canceled
: Connection reset by peer
request canceled
: Connection reset by peer
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
request canceled
: Connection reset by peer
request canceled
: Connection reset by peer
request canceled
: Connection reset by peer
request canceled
: Connection reset by peer
[basicsocket] send_data: Resource temporarily unavailable
request canceled
: Connection reset by peer
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] receive timed out.
[CBasicClient] receive failed: /tmp/zapit.sock
request canceled
: Connection reset by peer
[basicsocket] send_data: Resource temporarily unavailable

sorry, dass es soviel ist, aber helft mir doch ma bitte

box: nokia dbox2 sat 2xI avia 600 bmon 1.2
yadd: AlexW Snapshot vom 16.09.
system: winxp
netz: box über switch an 100er karte (crossed 10/10 geht gar nicht)

greetz
TheComing

*schieb*
hilfööö
keiner weiss was?
kann doch net sein