Software auslesen!

Beitrag von **aweile** » Montag 22. September 2003, 12:07

bin am software auslesen is das so okey

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-0a.ff.ef.07.00.00-92
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.10, My IP 192.168.0.32
debug: Sending TFTP-request for file C/DBOX/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-32-df-cc
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.32
Filename 'C/DBOX/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1FD2864 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.32
Filename 'C/DBOX/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###

FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial

Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.32
Filename 'C/DBOX/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################

## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 600241 Bytes = 586 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #89 Fri Aug 24 21:37:54 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.10:C/DBOX/cdkro
ot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.10:C/DBOX/
cdkroot/
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30624k available (1088k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20264kB/6754kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:32:df:cc
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found no CFI device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.10, my address is 192.168.0.32
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.10
Looking up port of RPC 100005/2 on 192.168.0.10
VFS: Mounted root (nfs filesystem).
Warning: unable to mount devfs, err: -2
Freeing unused kernel memory: 64k init
Warning: unable to open an initial console.
Kernel panic: No init found. Try passing init= option to kernel.
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: C000EA6F LR: 00001032 SP: C022FE80 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'swapper' Last syscall: 11
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C022FE80 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009CF0 C0277060 C022FDF0 00000002 000328A4 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 01FDD51C 01F9FFC0 01FA0038 000000F8
GPR24: 00000000 00100040 00800000 007FFF43 007FFF00 FFFFFFFF C012C228 C012C200
Call backtrace:
C000EA6F C0008FF0 C000EE74 C0002430 C0004CAC
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: C000EA6F LR: 00001032 SP: C1F9FEC0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'swapper' Last syscall: 11
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C1F9FEC0 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009CF0 C0277060 C1F9FE30 00000002 000328A4 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 00001032 01F9FFC0 01FA0038 000000F8
GPR24: C0002DF8 00100040 00800000 007FFF43 00000008 FFFFFFFF C022E000 C1F9FFD0
Call backtrace:
C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0
C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C C0002E7C
C0002718 C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548
C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C
C0002E7C C0002718 C000F548 C00054F0 C000291C
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..

Beitrag von **DieMade** » Montag 22. September 2003, 12:08

dbox2.rar wohl defekt / falsch entpackt.

Nimm http://www.dietmar-h.net/tools/dbox2.exe

Beitrag von **aweile** » Montag 22. September 2003, 12:25

habe deinen link benutzt,glaube das gleiche.Schau mal

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-0a.ff.ef.07.00.00-92
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.10, My IP 192.168.0.32
debug: Sending TFTP-request for file C/DBOX/dbox2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-32-df-cc
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.32
Filename 'C/DBOX/dbox2/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1FD2864 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.32
Filename 'C/DBOX/dbox2/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###

FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial

Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.32
Filename 'C/DBOX/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################

## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 600241 Bytes = 586 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #89 Fri Aug 24 21:37:54 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.10:C/DBOX/dbox2
/cdkroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.10:C/DBOX/
dbox2/cdkroot/
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30624k available (1088k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20264kB/6754kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:32:df:cc
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found no CFI device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.10, my address is 192.168.0.32
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.10
Looking up port of RPC 100005/2 on 192.168.0.10
Root-NFS: Server returned error -13 while mounting C/DBOX/dbox2/cdkroot/
VFS: Unable to mount root fs via NFS, trying floppy.
request_module[block-major-2]: Root fs not mounted
VFS: Cannot open root device "nfs" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 02:00
Rebooting in 180 seconds..

Beitrag von **DieMade** » Montag 22. September 2003, 12:27

Root-NFS: Server returned error -13 while mounting /DBOX/dbox2/cdkroot/
VFS: Unable to mount root fs via NFS, trying floppy.

Das ist jetzt ne andere Meldung. Was spricht das Netzwerklog vom Bootmanager? Ist der NFS-Server aktiviert?

Beitrag von **aweile** » Montag 22. September 2003, 12:31

Ist der NFS-Server aktiviert ist aktiv,also mit häkchen versehen

Beitrag von **DieMade** » Montag 22. September 2003, 12:37

DieMade hat geschrieben:Was spricht das Netzwerklog vom Bootmanager?

Beitrag von **aweile** » Montag 22. September 2003, 12:40

bin ganz von vorne angefangen und schreibe was oben im Bootmanagen steht und im com terminal.

***Adapter Desc: 3Com 3C90x Ethernet Adapter
***MAC address: 00:60:97:82:7A:BD Local IP: 192.168.0.10 (via Packet-Driver #0)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Request from 00:50:9C:32:DF:CC (assuming that this is DBox).
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\DBOX\dbox2\tftpboot\ppcboot"...
TFTP> Transfer finished, sent 439 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\DBOX\dbox2\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\DBOX\dbox2\tftpboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\DBOX\dbox2\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\DBOX\dbox2\tftpboot\logo-fb"...
TFTP> Transfer finished, sent 25 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\DBOX\dbox2\tftpboot\kernel-cdk"
TFTP> Started TFTP-Transfer for "C:\DBOX\dbox2\tftpboot\kernel-cdk"...
TFTP> Transfer finished, sent 1173 blocks
BootP> Answer sent!
1 - mountd: mount: path: C/DBOX/dbox2/cdkroot/
1 - mountd: path "C/DBOX/dbox2/cdkroot" not in export list
0 - mountd: mount: illegal path: C/DBOX/dbox2/cdkroot/

hier der com terminal!

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-0a.ff.ef.07.00.00-92
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.10, My IP 192.168.0.32
debug: Sending TFTP-request for file C/DBOX/dbox2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-32-df-cc
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.32
Filename 'C/DBOX/dbox2/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1FD2864 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.32
Filename 'C/DBOX/dbox2/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###

FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial

Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.32
Filename 'C/DBOX/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################

## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 600241 Bytes = 586 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #89 Fri Aug 24 21:37:54 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.10:C/DBOX/dbox2
/cdkroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.10:C/DBOX/
dbox2/cdkroot/
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30624k available (1088k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20264kB/6754kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:32:df:cc
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found no CFI device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.10, my address is 192.168.0.32
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.10
Looking up port of RPC 100005/2 on 192.168.0.10
Root-NFS: Server returned error -13 while mounting C/DBOX/dbox2/cdkroot/
VFS: Unable to mount root fs via NFS, trying floppy.
request_module[block-major-2]: Root fs not mounted
VFS: Cannot open root device "nfs" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 02:00
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: C0004A6F LR: 00001032 SP: C022FDF0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C022FDF0 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009CF0 C0277060 C022FD60 00000002 000328A4 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 01FDD51C 01F9FFC0 01FA0038 000000F8
GPR24: C02F3150 00100040 00800000 FFFFFFEA C0170000 FFFFFFFF C0150000 00000000
Call backtrace:
C0004A6F C0008FF0 C000EE74 C0141C0C C013E814 C00022AC C0004CAC
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..

so das ist das wo ich der dbox2 neu strom gegeben habe.am bootmanager alle einstellungen beachtet,und dein neuen link habe ich auch benutzt!

Beitrag von **DieMade** » Montag 22. September 2003, 12:44

1 - mountd: mount: path: C/DBOX/dbox2/cdkroot/
1 - mountd: path "C/DBOX/dbox2/cdkroot" not in export list
0 - mountd: mount: illegal path: C/DBOX/dbox2/cdkroot/

Was steht im Bootmanager als Root-Verzeichnis bei NFS?

Beitrag von **aweile** » Montag 22. September 2003, 12:46

genau das:C:\DBOX\cdkroot

Beitrag von **DieMade** » Montag 22. September 2003, 12:47

Dann trag mal C:\DBOX\dbox2 dort ein ...

Beitrag von **aweile** » Montag 22. September 2003, 13:08

so bin weiter jetzt steht da,das hier!

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-0a.ff.ef.07.00.00-92
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.10, My IP 192.168.0.32
debug: Sending TFTP-request for file C/DBOX/dbox2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-32-df-cc
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.32
Filename 'C/DBOX/dbox2/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##

LCD logo at: 0x130000 (0x1FD2864 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.32
Filename 'C/DBOX/dbox2/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###

FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial

Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.32
Filename 'C/DBOX/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################

## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 600241 Bytes = 586 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #89 Fri Aug 24 21:37:54 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.10:C/DBOX/dbox2
/cdkroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.10:C/DBOX/
dbox2/cdkroot/
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30624k available (1088k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20264kB/6754kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:32:df:cc
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found no CFI device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.10, my address is 192.168.0.32
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.10
Looking up port of RPC 100005/2 on 192.168.0.10
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 64k in
init started: BusyBox v0.60.2 (2002.02.26-14:29+0000) multi-call

dbox2miniroot zum Flash auslesen v1.0
linux@dbox2 Project http://dbox2.elxsi.de
Wilkommen auf ihrer dbox2
druecken sie bitte einmal Enter
und danach geben sie ein
cat /dev/mtd/5 >/flash.img
das dauert ca 2 bis 5 minuten
dann kommt die Raute wieder
dann befindet sich in c: dbox2 cdkroot
die Datei flash.img , die ganz genau 8257536 Bytes
gross sein solte !
das ist dann ihr backup Flashimage das sie gut aufheben sollten
danach koennen sie die dbox2 einfach ausmachen

Please press Enter to activate this console.

BusyBox v0.60.2 (2002.02.26-14:29+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

# cat /dev/mtd/5 > flash.img
nfs: server 192.168.0.10 not responding, still trying
nfs: server 192.168.0.10 not responding, still trying
nfs: server 192.168.0.10 not responding, still trying
cat

Beitrag von **DieMade** » Montag 22. September 2003, 13:10

Jo, den Mist hatte ich auch mal.

Firewall/Virenscanner/Cisco VPN-Client deaktivieren/deinstallieren.

Evtl. hilft auch der allseits beliebte Windows-Reboot

Beitrag von **aweile** » Montag 22. September 2003, 13:16

DieMade

du bist der held alles im grünem BREICH.
Ich danke dir