Folgende Hardware:
Nokia 2 x I, Avia 600
Avia600.ux,ucodes.bin,cam-alpha.bin liegt im ucodes Verzeichnis
Starte mit Winboot.
Service Scan habe ich schon gemacht.
MD5check meldet alles ok bzw. die Versions nummern
hiernun mein LOG:
Restarting systdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-7c.98.1c.07.00.00-01
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 10.10.10.1, My IP 10.10.10.100
debug: Sending TFTP-request for file C/tools/dbox2/yadd/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 221607
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Nov 29 2001 - 22:17:31)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-41-1b-f7
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 10.10.10.1; our IP address is 10.10.10.100
Filename 'C/tools/dbox2/yadd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1FE13C8 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 10.10.10.1; our IP address is 10.10.10.100
Filename 'C/tools/dbox2/yadd/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
FB logo at: 0x0 (0x1FE13C8 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: tiab
3: flash
4: test2
Select image (1-4), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
BOOTP broadcast 1
TFTP from server 10.10.10.1; our IP address is 10.10.10.100
Filename 'C/tools/dbox2/yadd/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
##################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 615974 Bytes = 601 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (steffen@sr01.sth-serv.de) (gcc version 3.0.2) #2 Fri Dec 14
03:17:27 CET 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=10.10.10.1:C/tools/dbox2/
yadd/cdkroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=10.10.10.1:C/tools/d
box2/yadd/cdkroot/
time_init: decrementer frequency = 251250000/60
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30584k available (1116k kernel code, 432k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20218kB/6739kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:41:1b:f7
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 10.10.10.1, my address is 10.10.10.100
IP-Config: Guessing netmask 255.0.0.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 10.10.10.1
Looking up port of RPC 100005/2 on 10.10.10.1
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k it
Bummer, can't write to log on /dev/tty5!
console=/dev/console
init started: BusyBox v0.60.1 (2001.12.14-01:30+0000) multi-call rcS starting
Mounting /proc device
Starting inetd
Setting hostname
/bin/hostname: not found
Lade module
lade rtc-modul
Real Time Clock Driver v0.1
TBSCR: 00000103
TBU: 03A79CD4
TBF: 03A89CC7
TBREFU: FFFFFFFF
TBREFL: FFFFFFFF
Lade i2c-core
i2c-core.o: i2c core module
Lade i2c-8xx
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Lade info
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
Lade soundcore
Lade avs
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Lade saa7126
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Lade event
event: init ...
Lade fp
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Lade avia
Lade gtx_core
gtx-core.c: init_gtx: gtxID 0b
gtx-core.c: init_gtx: loaded AViA GTX core driver
Lade demux
Lade cam
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Lade dmxdev
Lade dvbdev
Lade dvb
registering device.
Lade ves1893
i2c-core.o: driver VES1893 DVB DECODER registered.
feID: 1893 dd
i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
sync: 7f
vber: 0
using QPSK
sync: 60
Lade gtx_dmx
gen_dmx: found gtx
Lade gtx_vbi
avia_vbi: version (Dec 14 2001-03:33:36)
avia_vbi: got demux C-Cube - AViA GTX/DMX
Lade gtx_fb
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
Lade gtx_capture
$Id: gtx_capture.c,v 1.3 2001/12/01 06:37:06 gillem Exp $
Lade gtx_pig
gtx_pig: init
gtx_pig: WIDTH=160, S=0, HEIGHT=144
Setting up loopback device
lcd.o: LCD driver (KS0713) module
insmod: a module named lcd already exists
$Id: lcdmenu.cpp,v 1.9 2001/12/10 06:25:34 obi Exp $
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Bold)
killall: startmenu: no process killed
Lade sectionsd
$Id: sectionsd.cpp,v 1.87 2001/11/22 13:19:00 field Exp $
caching 120 hours
events are old 60min after their end time
CHCH [DEMUX] START 3
dmxdev: set buffer size 40000 -> 60000
Lade zapit
CHCH [DEMUX] START 4
CHCH [DEMUX] STOP 4
CHCH [DEMUX] START 5
CHCH [DEMUX] START 4
killall: camd: no process killed
Zapit $Id: zapit.cpp,v 1.44 2001/12/13 19:42:06 faralla Exp $
[zapit] CAID is: 1702
[zapit] scanning a satellite section
CHCH [DEMUX] STOP 5
dmxdev: set buffer size 40000 -> 60000
CHCH [DEMUX] START 5
[zapit] going to parse satellite Astra 19.2E
[zapit] Bouquet Astra with 1 tv- and 0 radio-channels.
[zapit] Bouquet BBC with 0 tv- and 1 radio-channels.
[zapit] Bouquet BetaDigital with 11 tv- and 6 radio-channels.
[zapit] Bouquet CANAL+ with 6 tv- and 15 radio-channels.
[zapit] Bouquet CANALSATELLITE with 1 tv- and 0 radio-channels.
[zapit] Bouquet CNBC with 0 tv- and 0 radio-channels.
[zapit] Bouquet Canal+ with 0 tv- and 2 radio-channels.
[zapit] Bouquet CanalSatlite with 8 tv- and 0 radio-channels.
[zapit] Bouquet F.U.N. with 1 tv- and 0 radio-channels.
[zapit] Bouquet FRANCISZKANIE with 1 tv- and 0 radio-channels.
[zapit] Bouquet MTV Networks with 6 tv- and 0 radio-channels.
[zapit] Bouquet Maastricht Multimedia with 1 tv- and 0 radio-channels.
[zapit] Bouquet Motors TV with 1 tv- and 0 radio-channels.
[zapit] Bouquet ORF with 12 tv- and 14 radio-channels.
[zapit] Bouquet Premiere World with 43 tv- and 21 radio-channels.
[zapit] Bouquet ProSiebenSat.1 with 4 tv- and 0 radio-channels.
[zapit] Bouquet RTBF with 1 tv- and 0 radio-channels.
[zapit] Bouquet SITCOM with 1 tv- and 0 radio-channels.
[zapit] Bouquet STS with 0 tv- and 1 radio-channels.
[zapit] Bouquet TV5 with 1 tv- and 0 radio-channels.
[zapit] Bouquet Telewizja Polska S.A. with 1 tv- and 0 radio-channels.
[zapit] Bouquet VIVA Fernsehen GmbH & Co. KG with 1 tv- and 0 radio-channels.
[zapit] Bouquet Video Italia with 1 tv- and 0 radio-channels.
CHCH [DEMUX] STOP 5
dmxdev: set buffer size 40000 -> 60000
CHCH [DEMUX] START 5
[zapit] Bouquet Wishline with 1 tv- and 0 radio-channels.
[zapit] Bouquet Wizja TV with 24 tv- and 4 radio-channels.
[zapit] Bouquet n-tv with 1 tv- and 0 radio-channels.
[zapit] Found 26 bouquets.
[zapit] channels have been loaded succesfully
[zapit] we have got 542 tv- and 182 radio-channels
Lade lcd
insmod: a module named lcd already exists
Lade lcdd
Network LCD-Driver 0.1
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /share/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /share/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Regular)
Lade controld
Controld 0.1
[controld] set volume: 0
SWITCH LETTER BOX
Starting nhttpd
Starte Neutrino
CHCH [DEMUX] STOP 5
dmxdev: set buffer size 40000 -> 60000
CHCH [DEMUX] START 5
http-demoserver
NeutrinoNG $Id: neutrino.cpp,v 1.98 2001/12/13 00:51:52 McClean Exp $
1024k video mem
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /share/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /share/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache, using max. 4MB...
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth <IMG SRC="/forum/images/smiles/icon_cool.gif"> not supported
error while loading settings: /var/neutrino.conf
using defaults...
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial/Italic)
[FONT] FTC_Face_Requester (Arial/Bold)
CHCH [DEMUX] STOP 5
dmxdev: set buffer size 40000 -> 60000
CHCH [DEMUX] START 5
[FONT] FTC_Face_Requester (Arial Black/Regular)
That was returned: 00t
zapit failed for function >6<
All channels received
receiving bouquets...
All bouquets received (8). Receiving channels...
receiving channels for BBC
receiving channels for BetaDigital
receiving channels for CANAL+
receiving channels for Canal+
receiving channels for ORF
receiving channels for Premiere World
receiving channels for STS
receiving channels for Wizja TV
All bouquets-channels received
CHCH [DECODER] ABORT
query epg for onid_tsid >13034< (BBC World Service)
sync: 0
sync: 1f
vber: 28728
CHCH [DEMUX] START 6
CHCH [DEMUX] STOP 6
CHCH [DEMUX] START 6
CHCH [DEMUX] STOP 5
dmxdev: set buffer size 40000 -> 60000
CHCH [DEMUX] START 5
CHCH [DEMUX] STOP 6
CHCH [DEMUX] START 6
CHCH [DEMUX] STOP 6
CHCH [DEMUX] START 1
CHCH [DEMUX] START 0
CHCH [DECODER] SETSTREAMTYPE
CHCH [DECODER] PLAY
avia_core.c: avia_interrupt: New sample freq: 2.
avia_core.c: avia_interrupt: Reserved 01.
avia_vbi: stop_vtxt (pid = 0xFFFFFFFF)
got apids for: 13034 - 1 apids!
avia_core.c: avia_interrupt: New sample freq: 2.
query epg for onid_tsid >13034< (BBC World Service)
CHCH [DEMUX] STOP 4
CHCH [DEMUX] START 4
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5
query epg for onid_tsid >13034< (BBC World Service)
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5
query epg for onid_tsid >13034< (BBC World Service)
query epg for onid_tsid >13034< (BBC World Service)
query epg for onid_tsid >13034< (BBC World Service)
query epg for onid_tsid >13034< (BBC World Service)
[controld] Command received
[controld] Version: 1
[controld] Command: 128
[controld] Param: 0
[controld] Param2: 0
[controld] Param3:
[controld] get volume
getting volume: 100
sending volume: 100
[controld] Command received
[controld] Version: 1
[controld] Command: 2
[controld] Param: 100
[controld] Param2: 0
[controld] Param3:
[controld] set volume
[controld] set volume: 0
query epg for onid_tsid >13034< (BBC World Service)
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5
CHCH [DEMUX] STOP 5
CHCH [DEMUX] START 5
danke
Eure Babs
