Hab heute mal verschiedene Yadd`s probiert, keine will starten über den Dbox Bootmanager, kann mir jemand sagen wieso?
Hier mal ein Log
U-Boot 0.4.0 (TuxBox) (Sep 19 2003 - 18:03:49)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
find_inode failed for name=u-boot.conf
load: Failed to find inode
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
find_inode failed for name=logo-lcd
load: Failed to find inode
ready - can't find logo in flash - try network
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
Bytes transferred = 7680 (1e00 hex)
find_inode failed for name=logo-fb
load: Failed to find inode
can't find logo in flash - try network
BOOTP broadcast 1
TFTP from server 192.168.0.10; our IP address is 192.168.0.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: #########
Bytes transferred = 43045 (a825 hex)
Options:
1: Bootmeldungen auf Seriell (ttyS0) - standard
2: Bootmeldungen auf TV (fb0)
3: Keine Bootmeldungen
4: Flashen via YADD
- Flashimage umbennenn in dboxflash.img
- in das Verzeichniss tftpboot kopieren
- beim Bootvorgang die Taste 4 drcken.
HAVE FUN...
...special u-boot for DboxII Boot-Manager
V0.2 patched by Homar 2003
Select option (1-4), other keys to stop autoboot: 0
TFTP from server 192.168.0.10; our IP address is 192.168.0.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: #################################################################
#################################################################
###########
Bytes transferred = 721712 (b0330 hex)
..............................................................
Un-Protected 62 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 721648 Bytes = 704.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.22 (Sinnlos98@athlon-mp) (gcc version 3.2.3) #31 Fri Sep 19 18
:04:47 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.10:/C/Yadd/cdkroot/ ip=1
92.168.0.202:192.168.0.10:::::off console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30628k available (1232k kernel code, 436k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:11:7e:3c
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.202, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.202, domain=, nis-domain=(none),
bootserver=192.168.0.10, rootserver=192.168.0.10, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.10
Looking up port of RPC 100005/1 on 192.168.0.10
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
Kernel panic: No init found. Try passing init= option to kernel.
<0>Rebooting in 180 seconds..
Yadd startet nicht ? Wer weis wieso
-
- Image-Team
- Beiträge: 1015
- Registriert: Freitag 7. Februar 2003, 18:37