bis gestern lief meine dbox2 ohne probleme. als ich sie gerade starten wollte, blieb sie beim booten hängen......
hier mal das log:
U-Boot 0.4.0 (TuxBox) (Jul 21 2003 - 20:18:06)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Phillips
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ..
.env: can't set "lcd_inverse"
env: can't set "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Bus Fault @ 0x01fe8d00, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01faee00 Unknown values in msr
NIP: 01FE8D00 XER: 8000A57F LR: 01FE8D00 REGS: 01faee00 TRAP: 0200 DAR: 00000005
MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00
GPR00: 01FE8D00 01FAEEF0 00000000 08000000 00100000 000002D0 001C5A00 FFFFEA00
GPR08: FFFFFE94 01FF6530 000002CC 00000000 33353555 00032724 01FFBB00 01F93000
GPR16: 00000000 00000200 10000A00 00000C10 7DD04080 00000001 00000000 01FD509C
GPR24: 01FD5660 00000001 01FAEFC4 043005A0 00000000 01FAEF98 01FFC688 00100000
Call backtrace:
01FE8D00 01FE8B30 01FE6F68 01FDBDE0 01FD53B0
machine check
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-8e.53.fe.07.00.00-01
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 146452
verify sig: 262
Branching to 0x40000
das ganze wird ständig wiederholt......
wer kann mir helfen???
badboy
meine Box:
dbox2 (philips) sat
alexW2xBaseimageV1.6.10
snap vom 18.09.2003
avia600vb028
ucode built-in
cam-alpha cam 01_02_150E
