ich kann mich mit meiner Nokia Dbox2 nicht per Netzwerk nachträglich verbinden. Image aufspielen und so kein Problem, zeigt unter XP auch Datentransfer an. Box läuft einwandfrei, aber wenn ich Sie jetzt verbinden will habe ich kein Ping und Null Verbindung über FTP-Prog. Eine andere Nokia DBox2 vom Kumpel geht aber einwandfrei. Der Netzwerkanschluß kann ja bei der Box nicht defekt sein, weil sonst würde das Image flashen ja nicht funktionieren. Habe auch schon 3 andere Images gestestet. Immer das selbe Problem.
Meine Einstellungen PC:
IP-Adresse 192.168.5.4
Subnet: 255.255.255.0
Meine Einstellungen Box:
Beim Starten Netzwerk setzten ja
dhcp aus
ip 192.168.5.3
Netzmaske 255.255.255.0
Broadcast 192.168.5.255
Mein Bootlog lautet
Code: Alles auswählen
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-43.56.1b.07.00.00-ce
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0028
will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000
U-Boot 0.4.0 (TuxBox) (Aug 15 2003 - 16:44:21)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Warning: CPU Core has Silicon Bugs -- Check the Errata
Board: DBox2, Nokia -- Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
LCD: ready
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS: ..... done.
### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd'
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb'
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf'
### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf'
### FS (jffs2) loading 'vmlinuz'
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 648785 Bytes = 633.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK