kann alexW images nicht mehr flashen (nur noch betanova)

Wie blitze ich ein Bild - Permanent Outgoing Incomes
rene2003
Beiträge: 2
Registriert: Samstag 8. November 2003, 02:21

kann alexW images nicht mehr flashen (nur noch betanova)

Beitrag von rene2003 »

Ich habe ein großes Problem.
Seit gestern bekomme ich nur noch Betanova über den Bootmanager auf die Box.
Jeder Versuch ein AlexW Image zu flashen endet mit dem Hinweis "flash not erased".
Versuche ich dann die Box zu resetten bleibt diese nach dem setzen der IP hängen.
Hat irgendjemand eine brauchbare Lösung, hab im Forum bisher nichts dazu gefunden.
Und wie gestagt, mit meinem betanova image klappt alles ohne probleme (Ist genau 128k größer als AlexW/sollte also incl.Bootloader sein).
(Habe ein Sagem dBox2-Kabel mit 2XIntel)

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-c7.ae.58.07.00.00-08
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.169.0.1, My IP 192.169.0.27
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-38-7e-d3
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.169.0.1; our IP address is 192.169.0.27
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.169.0.1; our IP address is 192.169.0.27
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/dbox/alexW2xBaseimageV1.6.10.img
BOOTP broadcast 1
TFTP from server 192.169.0.1; our IP address is 192.169.0.27
Filename '/C/dbox/alexW2xBaseimageV1.6.10.img'.
Load address: 0x120000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
######################
done

dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors

dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
sector 66 .... done
Erased 63 sectors

dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash... Flash not Erased

dbox2-ppcboot>
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Vermutlich entweder ein Flash defekt oder irgendeine Versorgungsspannung fehlt.
There are 10 types of people in the world: those who know binary and those who don't
rene2003
Beiträge: 2
Registriert: Samstag 8. November 2003, 02:21

Beitrag von rene2003 »

Dann dürft ich doch aber auch nicht die BR-Soft auf die Box flashen können.
Das funktioniert aber problemlos.

Rene