Nach Flashen kommt das!!!

[mkheinz]

Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 646890 Bytes = 631.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.22-dbox2 (tuxbox@linux) (gcc version 3.2.3) #2 Die Okt 14 12:0
1:38 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rw console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30836k available (1096k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:10:97:88
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Amd/Fujitsu Extended Query Table at 0x0040
Oops: kernel access of bad area, sig: 11
NIP: C00A40E0 XER: C000007F LR: C00A4024 SP: C01F3E70 REGS: c01f3dc0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000003, DSISR: 0000041F
TASK = c01f2000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C00A4024 C01F3E70 C01F2000 C013FFD0 C013FFD0 00000000 00000031 C01FC000
GPR08: 00000016 0000FFFF 00000010 C1F4B610 0000000D 00031B58 01FFC300 00000000
GPR16: 007FFF00 01FF59C4 00000000 FFFFFFFF 01FAFEA8 007FFEC0 00800000 00000000
GPR24: 00000000 00000000 00000001 007FFF24 C013FFD0 C1F4B610 0000FFFF 00000000
Call backtrace:
C0027F50 C00A4024 C00A4224 C00AA5C0 C00AA14C C00A3D28 C00A3368
C014F1D4 C01485F0 C0148634 C000227C C0004D80
Kernel panic: Attempted to kill init!
<0>Rebooting in 180 seconds


Ach so Box ist Nokia Sat 2x AMD Avia 500



Könnte mir jemand sagen was das zu bedeuten ha??????

Vielen Dank und netten Gruss mkheinz

[Don Camillo]

Hi,

was ist das denn für ein Image?

Ciao
Don Camillo

[aus.checker]

ich lese da RED Hat
ist das orginal linux!

[aus.checker]

@mkheinz

ist das der komplette log oder fehlt der obere teil
verwende mal ein alexw image und probiers damit