LIBDVB fehler beim Kompilieren der CDK

[Frnz]

100%[================================================================================>] 255,016 41.01K/s ETA 00:00

12:35:23 (41.01 KB/s) - »Archive/libdvb-0.5.3.tar.gz« gespeichert [255016/255016]

( rm -rf libdvb-0.5.3 || /bin/true ) && gunzip -cd Archive/libdvb-0.5.3.tar.gz | TAPE=- tar -x && ( cd libdvb-0.5.3; patch -p1 < ../Patches/libdvb.diff )
patching file Makefile
Hunk #1 succeeded at 18 with fuzz 2.
cd libdvb-0.5.3 && \
make libdvb.a libdvbci.a libdvbmpegtools.a \
AR=powerpc-tuxbox-linux-gnu-ar AS=powerpc-tuxbox-linux-gnu-as CC=powerpc-tuxbox-linux-gnu-gcc CXX=powerpc-tuxbox-linux-gnu-g++ NM=powerpc-tuxbox-linux-gnu-nm RANLIB=powerpc-tuxbox-linux-gnu-ranlib CFLAGS="-mcpu=823 -mmultiple -mstring -meabi -pipe -O2 -g3 -gdwarf-2" CXXFLAGS="-mcpu=823 -mmultiple -mstring -meabi -pipe -O2 -g3 -gdwarf-2" LDFLAGS="" PKG_CONFIG_PATH=/home/franz/dbox2/cdkroot/lib/pkgconfig \
CFLAGS="-mcpu=823 -mmultiple -mstring -meabi -pipe -O2 -g3 -gdwarf-2 -Ino/dvb/include -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE" && \
make install PREFIX=/home/franz/dbox2/cdkroot
make[1]: Entering directory `/home/franz/cvs-tuxbox/cdk/libdvb-0.5.3'
make -C libdvb main
make[2]: Entering directory `/home/franz/cvs-tuxbox/cdk/libdvb-0.5.3/libdvb'
powerpc-tuxbox-linux-gnu-g++ -I. -I../include -I../../include -mcpu=823 -mmultiple -mstring -meabi -pipe -O2 -g3 -gdwarf-2 -Ino/dvb/include -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -c devices.cc
In file included from devices.cc:1:
../include/devices.hh:14:32: linux/dvb/frontend.h: No such file or directory
In file included from devices.cc:1:
../include/devices.hh:48: 'fe_spectral_inversion_t' is used as a type, but is
not defined as a type.
devices.cc:2:32: linux/dvb/frontend.h: No such file or directory
devices.cc:10: syntax error before `[' token
devices.cc: In function `std:::empty:& operator<<(std:::empty:&,
Transponder&)':
devices.cc:125: `FE_QPSK' undeclared (first use this function)
devices.cc:125: (Each undeclared identifier is reported only once for each
function it appears in.)
devices.cc:127: `FE_QAM' undeclared (first use this function)
devices.cc:135: `FE_OFDM' undeclared (first use this function)
devices.cc:144: `class Transponder' has no member named `inversion'
devices.cc:145: `INVERSION_OFF' undeclared (first use this function)
devices.cc:148: `INVERSION_ON' undeclared (first use this function)
devices.cc:151: `INVERSION_AUTO' undeclared (first use this function)
devices.cc: In function `std::istream& operator>>(std::istream&,
Transponder&)':
devices.cc:299: `FEC_AUTO' undeclared (first use this function)
devices.cc:300: `class Transponder' has no member named `inversion'
devices.cc:399: `class Transponder' has no member named `inversion'
devices.cc:399: `invset' undeclared (first use this function)
make[2]: *** [devices.o] Fehler 1
make[2]: Leaving directory `/home/franz/cvs-tuxbox/cdk/libdvb-0.5.3/libdvb'
make[1]: *** [libdvb/libdvb.a] Fehler 2
make[1]: Leaving directory `/home/franz/cvs-tuxbox/cdk/libdvb-0.5.3'
make: *** [.libdvb] Fehler 2
franz@linux:~/cvs-tuxbox/cdk>

warum ?

[Npq]

warum ?

Darum:

powerpc-tuxbox-linux-gnu-g++ -I. -I../include -I../../include -mcpu=823 -mmultiple -mstring -meabi -pipe -O2 -g3 -gdwarf-2 -Ino/dvb/include -

Abhilfe, CDK neu configure'n und Option "--with-cvsdir=[...]" richtig setzen oder rausfinden warum das nicht richtig erkannt wurde.

Npq

[Frnz]

danke man

war ich wohl im Trance

es geht sorry es war :

you@pc:~/tuxbox-cvs/cdk$ ./configure --enable-maintainer-mode \--prefix=$HOME/dbox2 \

das hier :
--with-cvsdir=$HOME/tuxbox-cvs

danke Npq