Na gut... du hast es so gewollt.....
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-36.e1.ba.07.00.00-85
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/sagem-dbox2/kernel/os not found: Invalid argument
boot flash /root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: Invalid argument
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0204
will verify ELF image, start= 0x800000, size= 207425
verify sig: 262
Branching to 0x40000
ppcboot 0.6.4 (Jul 13 2001 - 00:15:59)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-32-10-db
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x80832 (0x1C20 bytes)
FB driver (AVIA-ENX) initialized
FB logo at: 0x8247A (0xDDD2 bytes)
Input: serial
Output: serial
1: Console on fb
2: Console on ttyS0
Select (1-4), other keys to stop autoboot: 0
Kernel image at: 0x10020034 (0x807D6 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 526230 Bytes = 513 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (
root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #97 Mon Aug 27 17:52:09 CEST 2001
Boot arguments: console=ttyS0 ro root=/dev/mtdblock/3
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ro root=/dev/mtdblock/3
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30792k available (960k kernel code, 392k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20376kB/6792kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:32:10:db
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found no CFI device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var"
0x00160000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (
rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k in
Bummer, can't write to log on /dev/tty5!
console=/dev/consoleinit started: BusyBox v0.50 (2001.08.26-20:11+0000) multi-c
all bilcd.o: LCD driver (KS0713) module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 03
feID: 00
fpID: 52
enxID: 03
gtxID: ffffffff
hwREV: 21
fpREV: 23
DEMOD: VES1993
[1] 28
/bin/md5check: /ucodes/avia500.ux: No such file or directory
avia500: not found
/bin/md5check: /ucodes/avia600.ux: No such file or directory
avia600: not found
/bin/md5check: /ucodes/ucode.bin: No such file or directory
ucodes: not found
/bin/md5check: /ucodes/cam-alpha.bin: No such file or directory
cam-alpha: not found
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
avia_core.c: do_firmread: Unable to load '/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
enx-core: Loaded AViA eNX core driver
/lib/modules/2.4.2/misc/cam.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wait
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_command
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_rd
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_flush_pcr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_read_message
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_reset
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_write_message
/lib/modules/2.4.2/misc/ves1993.o: unresolved symbol register_demod
/lib/modules/2.4.2/misc/ves1993.o: unresolved symbol unregister_demod
/lib/modules/2.4.2/misc/enx_dmx.o: unresolved symbol avia_set_pcr
/lib/modules/2.4.2/misc/enx_dmx.o: unresolved symbol unregister_demux
/lib/modules/2.4.2/misc/enx_dmx.o: unresolved symbol register_demux
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_vbi: version (Oct 30 2001-14:17:07)
avia_vbi: error - no demux found
/lib/modules/2.4.2/misc/enx_vbi.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
CXA2126 found
FTP4ALL 3.012, Copyright (C) 1996-2000 by Crescent (
crescent@ftp4all.de)
This program is FREE SOFTWARE and distributed under GNU PUBLIC LICENSE
Server on host dbox is ready and listening on *:21
Base directory : /var/
Readme file : (none)
Permission file: .permissions
Errlog file : log/ftpd.err
Log file : log/ftpd.log
Log program : (none)
Server program : /sbin/ftps
############################################
## ##
## V 28c , ezap + neutrino + lcars ##
## ##
## N O T F O R S A L E !! ##
## ##
############################################
[1] 68
[1] Done /bin/aniplay /usr/ani/dbox-neu.ani &
Please press Enter to activate this console.
StartMenu dbox2 Linux Projekt
2001 by Andre Paul
Starte /var/etc/neutrino.sh...
Starte neutrino (zapit)
Network LCD-Driver 0.1
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /usr/lib/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /usr/lib/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /usr/lib/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /usr/lib/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Regular)
Controld 0.1
[controld] set volume: 0
killall: camd: no process killed
sh: tcsetpgrp: Inappropriate ioctl for device
Zapit $Id: zapit.cpp,v 1.26 2001/10/31 12:36:21 field Exp $
[zapit] fopen: /var/zapit/last_chan: No such file or directory
[zapit] open ca0: No such file or directory
[zapit] /var/zapit/services.xml: No such file or directory
[zapit] channels have been loaded succesfully
[zapit] we have got 0 tv- and 0 radio-channels
[zapit] _writecam: open ca0: Bad file descriptor
$Id: sectionsd.cpp,v 1.78 2001/10/31 12:38:30 field Exp $
caching 120 hours
events are old 60min after their end time
[1] 88
sh: tcsetpgrp: Inappropriate ioctl for device
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
NeutrinoNG $Id: neutrino.cpp,v 1.73 2001/10/31 12:35:39 field Exp $
1024k video mem
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /usr/lib/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /usr/lib/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /usr/lib/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /usr/lib/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache, using max. 4MB...
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth 8) not supported
Using zapit
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial/Italic)
[FONT] FTC_Face_Requester (Arial/Bold)
[FONT] FTC_Face_Requester (Arial/Regular)
[FONT] FTC_Face_Requester (Arial Black/Regular)
doing network setup...
IP : 192.168.0.202
Netmask : 255.255.255.000
Broadcast: 192.168.0.255
SIOCADDRT: Network is unreachable
[zapit] fopen: /var/zapit/last_chan: No such file or directory
That was returned: 00a
Changed to TV-mode
tv_channellist is empty
That was returned: -0c
Wrong Command was send for channelsInit(). Exiting.
[controld] Command received
[controld] Version: 1
[controld] Command: 128
[controld] Param: 0
[controld] Param2: 0
[controld] Param3:
[controld] get volume
getting volume: 100
sending volume: 100
[controld] Command received
[controld] Version: 1
[controld] Command: 2
[controld] Param: 100
[controld] Param2: 0
[controld] Param3:
[controld] set volume
[controld] set volume: 0
das wars..... danach is nix mehr....
muesste sich nicht zumindest irgendwas im display bewegen lassen...
oder liegt das wirklich nur an diesen ucode-dateien ??
Danke
Rainer
IP steht auch im log
