HHHIIILLFFEE !!

Anlaufschwierigkeiten? Was ist was? Worum geht's?
geri0077
Neugieriger
Neugieriger
Beiträge: 3
Registriert: Samstag 7. Februar 2004, 11:39

HHHIIILLFFEE !!

Beitrag von geri0077 »

### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf'
### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf'
### FS (jffs2) loading 'vmlinuz'
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 694053 Bytes = 677.8 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.22-dbox2 (tuxbox@debian) (gcc version 3.2.3) #3 Fri Sep 19 21:
07:26 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rw console=ttyS0
Decrementer Frequency = 251625000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30684k available (1220k kernel code, 400k data, 64k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:44:ee:bd
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00800000 : "root (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 64k init
Starting pid 12, console /dev/console: '/etc/init.d/rcS'/bin/sh: run-parts: not
found
/bin/sh: run-parts: not found
/bin/sh: run-parts: not found
/bin/sh: run-parts: not found
Using /lib/modules/2.4.22-dbox2/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.22-dbox2/misc/info.o
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
Using /lib/modules/2.4.22-dbox2/misc/event.o
event: init ...
Using /lib/modules/2.4.22-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Using /lib/modules/2.4.22-dbox2/misc/saa7126.o
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [](pos. 1).
Using /lib/modules/2.4.22-dbox2/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.22-dbox2/misc/dvb_demux.o
Using /lib/modules/2.4.22-dbox2/misc/dvbdev.o
Using /lib/modules/2.4.22-dbox2/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
Using /lib/modules/2.4.22-dbox2/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.22-dbox2/misc/dmxdev.o
write 1 event's ...
write 1 event's ...
Using /lib/modules/2.4.22-dbox2/misc/dvb_frontend.o
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
Using /lib/modules/2.4.22-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.2 2003/07/22 08:01:56 alexw Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.5 2003/06/04 11:04:45 alexw Exp $
avia_gt_dmx: No firmware found at /var/tuxbox/ucodes/ucode.bin, using compiled-i
n version.
avia_gt_dmx: Successfully loaded ucode V0.14
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.4 2003/07/22 08:01:56 alexw Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.22-dbox2/misc/dvb.o
dvb.c: init_dvb
Init VES1893
Using /lib/modules/2.4.22-dbox2/misc/ves1893.o
i2c-core.o: driver VES1893 DVB demodulator registered.
i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
VES1893: attaching VES1893 at 0x10 to adapter
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp
$
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_proc.o
avia_gt_proc: Using config file '/var/tuxbox/config/avia.conf'.


avia_gt_proc: $Id: avia_gt_proc.c, v0.97 2003/09/25 21:25:00 BOFH Exp $

avia_gt_proc: found - AVIA GTX
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.6 2003/07/22 08:01:56 alexw Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
CXA2092 found
CXA2092 found
Using /lib/modules/2.4.22-dbox2/misc/camd-cardserver.o
ioport base = ff000950
commproc base = ff0009c0
Using /lib/modules/2.4.22-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
Starting pid 76, console /dev/console: '/etc/init.d/start'
Please press Enter to activate this console. styled by TBT Team, Xmas Version[ne
wcamd] compiled Dec 21 2003, 21:42:42
[newcamd] Warning: Error opening config file /var/tuxbox/config/newcamd.conf, us
ing defaults.
[newcamd] using api2
[newcamd] cam read timeout
[newcamd] Warning: ca device init failed. Slot1 card will be disabled
[newcamd] loading keys and roms
[newcamd] keys and roms loaded
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf... failed: 1
[LCDFONT] Intializing font cache...
EXIT

Starting pid 77, console /dev/console: '/bin/sh'

BusyBox v1.00-pre3 (2003.09.26-17:25+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

/ # --- AB HIER GEHT NICHTS MEHR !!!!!

Bitte sagt mir was ich tun soll -- H I L F E

aber nicht sagen ( neu flashen ) geht nicht mit boot loader ,
oder mit boot net -- alles versucht, bin am ENDE.

Danke Leute, der was mir helfen kann.
mash4077
Tuxboxer
Tuxboxer
Beiträge: 4654
Registriert: Samstag 27. April 2002, 13:19

Beitrag von mash4077 »

Hi,

wenn Du mit Deinem EMU hier Hilfe erwarteste, dann muss ich Dich wohl enttäuschen.

Also, neu flashen und dann sehen wir weiter!

Gruß
mash
KeXXeN
Tuxboxer
Tuxboxer
Beiträge: 2634
Registriert: Samstag 15. November 2003, 09:00

Beitrag von KeXXeN »

mash4077 hat geschrieben: Also, neu flashen und dann sehen wir weiter!
Aber nicht das Image das er jetzt benutzt ;)

Lieber was von

dboxupdate.berios.de

;)
Zu Fragen oder Nebenwirkungen der hier genannten Begriffe benutzen sie bitte die Suchfunktion oder konsultieren sie die [url=https://tuxbox.org/forum/viewforum.php?f=26&] Frequentliy Asked Questions[/quote].
geri0077
Neugieriger
Neugieriger
Beiträge: 3
Registriert: Samstag 7. Februar 2004, 11:39

Beitrag von geri0077 »

sagt mir wiieee

würde ja ein anderes img aufspielen, aber es geht nicht mehr...
hab ich euch schon geschrieben

ok .. --- w i e
mash4077
Tuxboxer
Tuxboxer
Beiträge: 4654
Registriert: Samstag 27. April 2002, 13:19

Beitrag von mash4077 »

Mit dem Bootmanager! Und dann, bei Problemen, ein aussagefähiges Log hier posten. Mit "geht nicht" kann hier nämlich niemand was anfangen...

Gruß
mash
geri0077
Neugieriger
Neugieriger
Beiträge: 3
Registriert: Samstag 7. Februar 2004, 11:39

Beitrag von geri0077 »

die box schreibt immer warte auf ppc write ???

beim versuch zu flashen, und dan bleibt sie stehn
mash4077
Tuxboxer
Tuxboxer
Beiträge: 4654
Registriert: Samstag 27. April 2002, 13:19

Beitrag von mash4077 »

mash4077 hat geschrieben:Und dann, bei Problemen, ein aussagefähiges Log hier posten.
Gruß
mash
KeXXeN
Tuxboxer
Tuxboxer
Beiträge: 2634
Registriert: Samstag 15. November 2003, 09:00

Beitrag von KeXXeN »

Ok its Newbie Time:

Originale und legale Images:

http://dboxupdate.berlios.de/

Anleitung zum Flashen:

http://dboxupdate.berlios.de/install.php

Allgemeine immer wiederkehrende Fragen:

https://tuxbox-cvs.sourceforge.net/foru ... m.php?f=26

Speziell wie erstelle ich ein aussagefähiges Log:

https://tuxbox-cvs.sourceforge.net/foru ... hp?t=15918

Andere Fragen im Allgemeinen ... siehe oben unter "Suche"

Fragen im Speziellen:

Hier mit LOG (siehe oben) und ausführlicher Fehlerbeschreiben posten.

Das log oben bringt nichts, weil hier für dieses Image, weil illegal, kein Support geleistet wird.
Wenn du Probleme hast das neue Image (legal) zu flashen, dann poste das Log das der Bootmanager beim Flashen hergibt.

Wenn du nicht bereit bist, dein illegales Image aufzugeben, dann ist hier auch keiner Bereit, dir bei deinem Problem zu helfen.
Zu Fragen oder Nebenwirkungen der hier genannten Begriffe benutzen sie bitte die Suchfunktion oder konsultieren sie die [url=https://tuxbox.org/forum/viewforum.php?f=26&] Frequentliy Asked Questions[/quote].