ich versuche gerade meiner Phillips-Box (Debug-Mode) ein neues Image zu verpassen. Bisher ist es beim Versuch geblieben:
***Adapter Desc: Realtek RTL8139/810x Family Fast Ethernet NIC
***MAC address: 00:A0:B0:19:CF:DF Local IP: 192.168.0.1 (via Packet-Driver #0)
***BootP server started... Port 67
***TFTP server started... Port 69
_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free spacdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMI
PS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-90.77.ca.07.00.00-e8
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000
U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Phillips -- Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
LCD: ready
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS: .........
.### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd'
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb'
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf'
### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf'
### FS (jffs2) loading 'vmlinuz'
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 647997 Bytes = 632.8 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.22-dbox2 (tuxbox@suse) (gcc version 3.2.3) #4 Mon Sep 22 00:12
:57 CEST 2003
Jffs2-only Skars-Kernel mit NFS-Support folgender Aufteilung:
128k BR bootloader, 128k flfs( ppcboot ), 7936k root( jffs2 )
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rw console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30832k available (1100k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2b:23:e2
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00800000 : "root (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.00-pre3 (2003.11.01-13:14+0000) multi-cArgh. No free s
pace left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (erasableempty: y
es, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Argh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (e
rasableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
/etc/init.d/rcS: 7: cannot create /etc/network/ifstate: No space left on deviceA
rgh. No free space left for GC. nr_erasing_blocks is 0. nr_free_blocks is 0. (er
asableempty: yes, erasingempty: yes, erasependingempty: yes)
jffs2_reserve_space_gc of 196 bytes for garbage_collect_dnode failed: -28
Hat vielleicht jemand ne Idee.
Das Auslesen klappt übrigens auch nicht.