Box startet nach deep-standby nicht! Bitte um Hilfe!

Anlaufschwierigkeiten? Was ist was? Worum geht's?
Dirk_Halle
Neugieriger
Neugieriger
Beiträge: 11
Registriert: Sonntag 29. Februar 2004, 09:47

Box startet nach deep-standby nicht! Bitte um Hilfe!

Beitrag von Dirk_Halle »

Hallo Ihr Lieben,

ich weiss nicht mehr weiter.... jedesmal wenn ich meine nokia dbox2 ausschalte und dann wieder starte bleibt sie bei 'Lade...' stehen! Nur ein Rausziehen und Wiederreinstecken des Stecker hilft! Hab schon ein älteres Image geflasht, aber mit dem selben Effekt!

Habt Ihr eine Idee, was das sein könnte?

Ich häng mal das boot-log (nach normalen Start - also ohne Stecker ziehen) an!

Dirk

zdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
Board_EventWait: timed out
debug: unknown demodulatordebug: BMon V1.0 mID 01
debug: feID 00 gtxID 0b
debug: fpID 5a dsID 01-38.59.02.07.00.00-6a
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 148088
verify sig: 263
Branching to 0x40000


U-Boot 1.0.2 (TuxBox) (Feb 29 2004 - 10:30:07)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB:
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
Board_EventWait: timed out
debug: WARNING: unsupported FP ID 0x0
debug: write to 0x22/0x05 failed, rc -22
Board_EventWait: timed out
Board_EventWait: timed out
debug: unknown demodulatordebug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 00 gtxID 0b
debug: fpID 00 dsID 01-38.59.02.07.00.00-6a
debug: HWrev X5 SWrev 0.4
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x1000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
debug: Extension Memory tests (0x1000000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>
mash4077
Tuxboxer
Tuxboxer
Beiträge: 4654
Registriert: Samstag 27. April 2002, 13:19

Re: Box startet nach deep-standby nicht! Bitte um Hilfe!

Beitrag von mash4077 »

Dirk_Halle hat geschrieben: Board_EventWait: timed out
debug: unknown demodulatordebug: BMon V1.0 mID 01

Board_EventWait: timed out
debug: WARNING: unsupported FP ID 0x0
debug: write to 0x22/0x05 failed, rc -22
Board_EventWait: timed out
Board_EventWait: timed out
debug: unknown demodulatordebug: WATCHDOG RESET
Hi,

mal auf einen Fachmann warten, aber da scheint sich wohl ein Hardwaredefekt anzukündigen...

Gruß
mash
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Jo, mind. irgendwas blockiert den I2C. Da hängt so izemlich alles in der Box dran, also ist der Fehler so nicht weiter einzugrenzen.
There are 10 types of people in the world: those who know binary and those who don't