dbox2 UK help

Beitrag von **Spikey** » Mittwoch 5. Mai 2004, 23:58

ok am from uk just got my new dbox2 with image neutrino 1.7 on box but one i upload the new cable.xml for my area which i got of forum and reboot box then goto the servcie menu and under the
provides name it com up with telekom/lsh which is wrong i then try to do a scan which last about 2sec and has not found any channel any help would be great

Beitrag von **gadh** » Donnerstag 6. Mai 2004, 00:03

may be you should try the cable bruteforce channel search. by using the telekom/ish settings your box will only search cable areas which are used by these companies. Cable Bruteforce will scan alle transponders and services so will get a better result. but i'm not sure if the d-box2 is a cable receiver for your english cable. mabye it is different to the german one!?! do you know any british cableusers with a d-box?

Beitrag von **Spikey** » Donnerstag 6. Mai 2004, 00:13

It not that i cant change off telekom/lsh i have spoke to guys in uk that have got the dbox2 working fine and a guy sent me his cables.xml for my area i upload it then i get this problem even if i upload any file i cant seem to change provider name from telekom/lsh

Beitrag von **Spikey** » Donnerstag 6. Mai 2004, 10:50

can anyone one help me with this please or maybe tell me what the best image is out there for my box to use in uk on Kabel tv any help would be great thanks

Beitrag von **DrStoned** » Freitag 7. Mai 2004, 19:42

What Image do you have?

Beitrag von **gadh** » Freitag 7. Mai 2004, 21:24

when you cannot change telekom/ish you should flash another image. my favourit images are the jtg images

Beitrag von **DrStoned** » Freitag 7. Mai 2004, 22:08

my favourit images are the jtg images

you can get them at http://www.jackthegrabber.de/index.php . To download them you must register in the forum.

Greetz from DrStoned

Beitrag von **Zwen** » Samstag 8. Mai 2004, 11:21

try removing the line from "/var/tuxbox/config/scan.conf" that starts with "satNameNoDiseqc", then reboot.
You should be able to change the provider name in neutrino after that...
Zwen

Beitrag von **KrazeeScot** » Dienstag 18. Mai 2004, 00:20

Hi All

@mirror image

Are you Twest or NTL. Scanning on Twest is very difficult with Dbox2 I use a DVB-C card to make services.xml for my area. If the Dbox was previously at Telecom/Ish and you upload a new cables.xml without Telecom/Ish in the file then it will lock up and not scan. While you are testing it is better just to add your providers to the existing list.

This is an example:

- <cable name="NTL default (FEC 3)" satfeed="true" flags="9">
<transponder frequency="755000000" symbol_rate="6887000" fec_inner="3" modulation="3" />
</cable>
- <cable name="TWEST default (FEC 0)" flags="9">
<transponder frequency="619000000" symbol_rate="6952000" fec_inner="0" modulation="3" />
</cable>

Get in touch we can help each other

Cheers KrazeeScot

Beitrag von **KrazeeScot** » Dienstag 18. Mai 2004, 00:23

@mirror image
@Spikey

The translator screwed up your user name, the above post is for you Spikey