booten

Wie blitze ich ein Bild - Permanent Outgoing Incomes
pipos
Beiträge: 2
Registriert: Sonntag 9. Mai 2004, 18:00

booten

Beitrag von pipos »

Hallo leute .

echtes problem mit meiner nokia 2 intel zu booten.
kennt debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-e7.12.cc.05.00.00-70
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.1, My IP 192.168.2.9
debug: Sending TFTP-request for file C/Programme/Dbox2 Bootmanager/ppcboot_write
flash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-11-48-5a
FLASH: ## Unknown FLASH on Bank 0 - Size = 0x00000000 = 0 MB
*** failed ***
### ERROR ### Please RESET the board ###einer den text??

Bitte um ernsthafte hilfe !!!!!!!!
Dietmar
Senior Member
Beiträge: 8282
Registriert: Mittwoch 10. Oktober 2001, 00:00

Beitrag von Dietmar »

Ein Flash hat nen Knall.
Möglicherweise kommt das von einem kaputten Kontakt, einer fehlerhaften Durchkontaktierung oder einem unbeabsichtigten Kurzschluss.
Oder halt von einem kaputten Flash.
Oder von sonstwas.

Mit Images hat das allerdings nix zu tun, ich schiebs mal nach flashing.
pipos
Beiträge: 2
Registriert: Sonntag 9. Mai 2004, 18:00

Beitrag von pipos »

ok, schaun wir mal !!

Danke