EPG fällt ständig aus

Beitrag von **ChrisP** » Sonntag 1. August 2004, 20:32

Hallo!

Habe ein schlimmeres Problem mit dem EPG. Nach einem Neustart funktioniert das EPG ca. 2 Minuten und dann schreibt die D-Box nurmehr Warte auf EPG-Informationen...

Im Menü steht EPG auslesen aus
Wenn ich jedoch auf EPG auslesen ein gehe, dass Menü verlasse und wieder ins Menü gehe ist wieder nein bei EPG auslesen

Könnt ihr mir weiterhelfen?

Beitrag von **d-cool** » Sonntag 1. August 2004, 20:40

Hallo,
bei den Einstellungen gibt es den Menüpunkt "Einstellungen jetzt speichern". Bevor du die Einstellungen verlässt, solltest du diesen Menüpunkt auswählen und mit "OK" bestätigen. Dann sind deine geänderten Einstellungen auch nach dem Neustart noch da.

Beitrag von **ChrisP** » Sonntag 1. August 2004, 20:52

"EPG auslesen" befindet sich aber nicht bei den Einstellungen sondern bei den Features.

Beitrag von **d-cool** » Sonntag 1. August 2004, 21:00

Sorry, war mein Fehler

Da musst du wohl auf die Antwort eines Experten warten. Ich bin nämlich auch noch im Lernstadium...

Beitrag von **d-cool** » Sonntag 1. August 2004, 21:03

Sorry, war mein Fehler

Da musst du wohl auf die Antwort eines Experten warten. Ich bin nämlich auch noch im Lernstadium...

Beitrag von **ChrisP** » Sonntag 1. August 2004, 21:20

Trotzdem danke für die schnelle Antwort!

Glaube ich habe den "Fehler" schon gefunden. Die UCODE dürfte alt gewesen sein. Habe jetzt eine neue drauf und bis jetzt klappt alles. Hoffentlich war es das!

Beitrag von **ChrisP** » Montag 2. August 2004, 19:44

Leider wieder nichts! Jetzt hält das EPG zwar schon ca. 1 Stunde aber es fällt immer noch aus.

Habt ihr vielleicht einen Tipp für mich!?!?!?

Beitrag von **mash4077** » Montag 2. August 2004, 19:47

ChrisP hat geschrieben:Habt ihr vielleicht einen Tipp für mich!?!?!?

Hi,

- welche Box?
- welches Image?
- welche ucodes?
- Bootlog?

Gruß
mash

Beitrag von **ChrisP** » Montag 2. August 2004, 19:59

Schon mal danke für die schnelle Antwort!

Habe eine Nokia D-Box2

U-Codes: avia500v110, avia600vb022, ucode_00F0, cam_01_02_002E

Image: das neue Yadi-Image

Und hier der Bootlog:

error while loading icon: /share/tuxbox/neutrino/icons/shutdown.raw
error while loading palette: /share/tuxbox/neutrino/icons/shutdown.pal
zapit shot down

Waiting for controld (max. 9 seconds)
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-9c.31.cb.05.00.00-20
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 153208
verify sig: 263
Branching to 0x40000

U-Boot 1.1.1 (TuxBox) (Jul 18 2004 - 20:14:42)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ..

.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (jffs2) loading 'vmlinuz' to 0x100000
Scanning JFFS2 FS: .

.
### FS load complete: 610182 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 610118 Bytes = 595.8 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.25-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.3) #30 Mo Jul 1
9 00:08:13 CEST 2004
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock3 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30908k available (1032k kernel code, 368k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:11:73:ff
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (u-boot)"
0x00040000-0x000e0000 : "kernel (jffs2)"
0x000e0000-0x006a0000 : "root (squashfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'0) multi-
Using /lib/modules/2.4.25-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.25-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.25-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.25-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.25-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.25-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.25-dbox2/misc/avs.o
Using /lib/modules/2.4.25-dbox2/misc/saa7126.o
Detected STB:
Vendor: Nokia
Model: D-BOX2
Using /lib/modules/2.4.25-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.25-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.25-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.25-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.25-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.25-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.94 2004/07/03 01:18:36 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.25-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v00F0
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.38 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.25-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.25-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.25-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.25-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.25-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.25-dbox2/misc/aviaEXT.o
Using /lib/modules/2.4.25-dbox2/misc/ves1820.o
Using /lib/modules/2.4.25-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1893)...
Using /lib/modules/2.4.25-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.25-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.202 2004/06/24 00:26:58 carjay Exp $
Using /lib/modules/2.4.25-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.25-dbox2/kernel/net/sunrpc/sunrpc.o
$Id: chkIVersion.cpp,v 1.4 2004/07/16 21:54:30 mogway Exp $
Using /lib/modules/2.4.25-dbox2/kernel/fs/lockd/lockd.o
Yadi Snapshot vom 19.07.2004 00:05 - Image-Version 1.8.1.7
Networkcfg eth0: 192.168.5.5/255.255.255.0 gw 192.168.5.3
Startmode: Neutrino - SPTS:on - HWS:on
Using /lib/modules/2.4.25-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.25-dbox2/kernel/fs/cifs/cifs.o
Starting pid 87, console /dev/console: '/etc/init.d/start'

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.176 2004/04/
29 09:11:13 metallica Exp $
caching 504 hours
events are old 180min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.354 2004/06/10 19:56:12 rasc Exp $
[camd] no card is in slot #2
[camd] a card is in slot #1
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] no card is in slot #2
[camd] a card is in slot #1
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[deutsch.locale] superfluous entry: cam.wrong
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
avia_gt_core: masking unhandled irq reg 0 bit 6
SPTS, queue 0 extended.
avia_gt_core: masking unhandled irq reg 0 bit 7
avia_gt_core: masking unhandled irq reg 1 bit 15
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[LCDFONT] FTC_Face_Requester (Fix12/Regular)

Beitrag von **mash4077** » Montag 2. August 2004, 20:42

ChrisP hat geschrieben: ucode_00F0
cam_01_02_002E

Und hier der Bootlog:

avia_gt_ucode: ucode section filters enabled.
[...]
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable

Mal eine andere ucode.bin und/oder abgeschaltetes HWSF probiert?
Cam-alpha ist ein bisschen alt, ist aber wohl nicht das Problem...

Gruß
mash

Beitrag von **ChrisP** » Montag 2. August 2004, 21:08

UCode hatte ich schon einen anderen drauf. bei dem hat es nur für 5 minuten ca. funktioniert.

Meinst du mit HWSF Hardware Section verwenden?

Habe das jetzt mal ausgeschaltet. Bis jetzt funktioniert das EPG noch! mal sehen wie lange. Vielleicht war es das! Wofür ist das eigentlich gut?

Beitrag von **Nachtvogel** » Montag 2. August 2004, 21:13

Hallo!

Hardware Section Filtering dient dem Auslesen der EPG Informationen per Hardware. Da dies aber nicht auf jeder dBox funktioniert, gibt es auch eine Möglichkeit das Ganze abzuschalten. Wer Probleme beim Umschalten hat oder nur Ton und kein Bild, sollte auf jeden Fall diese Funktion abschalten. Mit den uCodes (Version 00F0) sollte Hardware Section Filtering auf allen dBox funktionieren.

Quelle Computer-Kern.de

Gruß Nachtvogel

Beitrag von **ChrisP** » Montag 2. August 2004, 21:14

Danke für die Erklärung.

Daran ist es auf jeden Fall nicht gelegen. EPG ist leider soeben wieder ausgefallen.

Beitrag von **Nachtvogel** » Montag 2. August 2004, 21:20

Hi!

Schon mal das Image neu geflasht?

Gruß Nachtvogel

Beitrag von **ChrisP** » Montag 2. August 2004, 21:23

Hallo!

Nein habe ich noch nicht. Das wäre einen Versuch wert! Werde ich gleich morgen ausprobieren.

Ihr hört dann wieder morgen von mir!

Schon mal einen recht herzlichen Dank für die schnellen Antworten.

Beitrag von **thegoodguy** » Montag 2. August 2004, 21:30

Hmm, mich persoenlich wuerde ja interessieren, ob der sectionsd da jedesmal abschmiert.
Welche Prozesse laufen den noch wenn der epg ausfaellt (Stichwort: telnet und ps)?
Interessant waere nicht nur ein Bootlog, sondern natuerlich auch der Log zum Ausfallzeitpunkt und auch danach.

Beitrag von **ChrisP** » Dienstag 3. August 2004, 08:49

Habe das Image 1.8.1.8 jetzt drauf. Vorher hatte ich das 1.8.1.0

HWS verwenden habe ich wieder ausgeschaltet und nach ca. 1 Stunde war es wieder aus! Kann ja mal den log weiterlaufen lassen und versuchen den log rauszufinden mit dem das EPG sein Ende findet.

Hoffe wir finden raus warum weil jede Stunde die Box neu zu starten macht nicht wirklich viel spaß!

Hallo!

Wenn ich Dich richtig verstehe ist es bei Dir so, daß sich die Option EPG auslesen von selbst auf aus stellt.
Normalerweise müßte es genau anders herum sein. Wenn man die Option aus schaltet, müßte sie
sich bei einem neustart von selbst wieder einschalten, so ist es bei mir.
Da Du ja neu geflasht hast, vermute ich, daß es ein Deiner Box liegt. Die config Dateien hast Du nach dem flashen nicht in die Box zurückgespielt, oder?

Gruß Nachtvogel

Nachtrag:
Ich würde Dir mal vorschlagen die BN2.01 auf die Box zu flashen, ein Update zu machen, das Image auslesen
und die Ucodes zu extrahieren.
Bei Einer Nokia Box würde ich die interne Ucodes (0014) verwenden

Beitrag von **ChrisP** » Dienstag 3. August 2004, 19:14

Hallo!

Ja, EPG auslesen stellt sich von selbst auf aus, und ich kann es nicht wieder auf ein stellen. Nach einem Neustart ist es aber schon wieder auf ein!

Habe die Ucode jetzt mal runtergelöscht und verwende die interne.

Was mir auch aufgefallen ist, ist dass manchmal "Kanal derzeit nicht verfügbar" steht. Nach 2 mal herumschalten funkt der Sender aber. Kann das damit zusammenhängen?

Das mit dem BN geht leider nicht, da ich meine Box von meinem Cousin auf Neutrino umstellen habe lassen und ich das BN nicht habe, und er ist dzt leider in Italien. Kommt erst wieder in 2 Wochen. Dann werde ich das aber machen.

Könnte es evtl. auch mit der alten cam-alpha.bin zusammenhängen?

Hallo!

Ich kann mir nicht vorstellen, daß es mit der cam-alpha.bin zusammenhängt.
Da kann ich mir eher vorstellen, daß es mit der cam-alpha.bin bei der Entschlüsselung bei Premiere Probleme gibt.

Gruß Nachtvogel

Beitrag von **ChrisP** » Dienstag 3. August 2004, 19:56

Premiere funktioniert ohne Probleme. Außer dem EPG-Problem eben.

Werde jetzt mal wieder das serielle Kabel anschließen und den Log mitlaufen lassen. Vielleicht sieht man da was!

Beitrag von **ChrisP** » Dienstag 3. August 2004, 20:27

So jetzt ist es soweit! Hier der Log vom Start bis zum Epg-Absturz! Vielleicht kann ja jemand was damit anfangen.

qdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-9c.31.cb.05.00.00-20
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 153208
verify sig: 263
Branching to 0x40000

U-Boot 1.1.1 (TuxBox) (Jul 26 2004 - 14:50:22)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .

.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (jffs2) loading 'vmlinuz' to 0x100000
Scanning JFFS2 FS: .

.
### FS load complete: 609447 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 609383 Bytes = 595.1 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.25-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.4) #11 Di Jul 2
7 22:29:15 CEST 2004
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock3 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30908k available (1032k kernel code, 368k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:11:73:ff
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (u-boot)"
0x00040000-0x000e0000 : "kernel (jffs2)"
0x000e0000-0x006a0000 : "root (squashfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'0) multi-
Using /lib/modules/2.4.25-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.25-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.25-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.25-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.25-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.25-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.25-dbox2/misc/avs.o
Using /lib/modules/2.4.25-dbox2/misc/saa7126.o
Detected STB:
Vendor: Nokia
Model: D-BOX2
Using /lib/modules/2.4.25-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.25-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.25-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.25-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.25-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.25-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.94 2004/07/03 01:18:36 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.25-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.38 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.25-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.25-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.25-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.25-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.25-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.25-dbox2/misc/aviaEXT.o
Using /lib/modules/2.4.25-dbox2/misc/ves1820.o
Using /lib/modules/2.4.25-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1893)...
Using /lib/modules/2.4.25-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.25-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.202 2004/06/24 00:26:58 carjay Exp $
Using /lib/modules/2.4.25-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.25-dbox2/kernel/net/sunrpc/sunrpc.o
$Id: chkIVersion.cpp,v 1.4 2004/07/16 21:54:30 mogway Exp $
Yadi Snapshot vom 27.07.2004 22:23 - Image-Version 1.8.1.8
Networkcfg eth0: 192.168.5.5/255.255.255.0 gw 192.168.5.3
Startmode: Neutrino - SPTS:on - HWS:off
Using /lib/modules/2.4.25-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.25-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.25-dbox2/kernel/fs/cifs/cifs.o
Starting pid 89, console /dev/console: '/etc/init.d/start'

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.177 2004/07/
20 15:53:26 thegoodguy Exp $
caching 504 hours
events are old 180min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.354 2004/06/10 19:56:12 rasc Exp $
[camd] no card is in slot #2
[camd] a card is in slot #1
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] no card is in slot #2
[camd] a card is in slot #1
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[deutsch.locale] superfluous entry: cam.wrong
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
avia_gt_core: masking unhandled irq reg 0 bit 6
SPTS, queue 0 extended.
avia_gt_core: masking unhandled irq reg 0 bit 7
avia_gt_core: masking unhandled irq reg 1 bit 15
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
SPTS, queue 0 extended.
[camd] starting onid 0001 sid 000a
[camd] set emm caid 1702 capid 1000
descramble onid: 0001 sid: 000a status: 1d1d
[controld] VIDEO_EVENT_SIZE_CHANGED 704x576 (4:3 -> 16:9)
[camd] set emm caid 1702 capid 1000
SPTS, queue 0 extended.
[camd] starting onid 0001 sid 0035
[camd] set emm caid 1702 capid 1000
descramble onid: 0001 sid: 0035 status: 1d1d
[controld] VIDEO_EVENT_SIZE_CHANGED 544x576 (16:9 -> 4:3)
[camd] set emm caid 1702 capid 0321
SPTS, queue 0 extended.
[camd] starting onid 0001 sid 32c9
[camd] set emm caid 1702 capid 0321
descramble onid: 0001 sid: 32c9 status: 1d1d
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
SPTS, queue 0 extended.
[camd] starting onid 0001 sid 000a
[camd] set emm caid 1702 capid 1000
descramble onid: 0001 sid: 000a status: 1d1d
[controld] VIDEO_EVENT_SIZE_CHANGED 704x576 (4:3 -> 16:9)
SPTS, queue 0 extended.
[controld] VIDEO_EVENT_SIZE_CHANGED 480x576 (16:9 -> 4:3)
[camd] set emm caid 1702 capid 1000
SPTS, queue 0 extended.
[camd] starting onid 0001 sid 000a
[camd] set emm caid 1702 capid 1000
descramble onid: 0001 sid: 000a status: 1d1d
[controld] VIDEO_EVENT_SIZE_CHANGED 704x576 (4:3 -> 16:9)
[CBasicClient] connect failed.
/tmp/sectionsd.sock: Connection refused
[CBasicClient] connect failed.
/tmp/sectionsd.sock: Connection refused
[CBasicClient] connect failed.
/tmp/sectionsd.sock: Connection refused
[CBasicClient] connect failed.
/tmp/sectionsd.sock: Connection refused
[CBasicClient] connect failed.SPTS, queue 0 extended.

[camd] starting onid 0001 sid 002b
/tmp/sectionsd.sock: Connection refused
[CBasicClient] connect failed.
/tmp/sectionsd.sock: Connection refused
descramble onid: 0001 sid: 002b status: 1d1d
[controld] VIDEO_EVENT_SIZE_CHANGED 704x576 (16:9 -> 4:3)

Code: Alles auswählen

[CBasicClient] connect failed.
/tmp/sectionsd.sock: Connection refused

spricht stark dafuer, dass der sectionsd abgeschmiert ist. Bitte log dich doch mal mit dem Programm

Code: Alles auswählen

telnet

auf die dbox ein wenn der EPG fehlt und guck was die Ausgabe des Befehls

Code: Alles auswählen

ps

ergibt, starte den sectionsd mit -d

Code: Alles auswählen

sectionsd -d

und warte nochmals bis er crashed (dann gibt der sectionsd mehr aus und man kann sehen, ob er z.B. ein SIGSEGV ausloest).

Beitrag von **ChrisP** » Mittwoch 4. August 2004, 18:41

Das schaut dann so aus:

data length: 4
Starting command 26
Request of stop sorting events.
Connection from UDS
version: 4, cmd: 26, numbytes: 1
data length: 4
Starting command 26
Request of continue sorting events.
dmx.read timeout - filter: 52 - timeout# 2[eitThread] dmxEIT restarted
dmx.read timeout - filter: 52 - timeout# 0dmx.read timeout - filter: 52 - timeou
t# 1--> 'changeDMX: before pthread_mutex_lock(&start_stop_mutex)' 31106.368000
--> 'changeDMX: after pthread_mutex_lock(&start_stop_mutex)' 0.668000
changeDMX [12]-> scheduled (0x54)
--> 'after DMX_SET_FILTER' 3.122000
[eitThread] skipping to next filter (> TIME_EIT_SKIPPING)
Connection from UDS
version: 4, cmd: 24, numbytes: 1
data length: 16
Starting command 24
[sectionsd] commandserviceChanged: Service changed to 20085000a
--> '[sectionsd] commandserviceChanged: before messaging lock' 322.162000
[sectionsd] commandserviceChanged: current service-descriptor not loaded yet!
--> '[sectionsd] commandserviceChanged: before wakeup' 1.215000
--> 'changeDMX: before pthread_mutex_lock(&start_stop_mutex)' 0.598000
dmx.read timeout - filter: 54 - timeout# 2--> 'changeDMX: after pthread_mutex_lo
ck(&start_stop_mutex)' 182.502000
changeDMX [12]-> current/next (0x4e)
--> 'after DMX_SET_FILTER' 3.010000
--> 'changeDMX: before pthread_mutex_lock(&start_stop_mutex)' 0.624000
--> 'changeDMX: after pthread_mutex_lock(&start_stop_mutex)' 0.610000
--> '[sectionsd] commandserviceChanged: after doWakeup' 0.781000
dmxSDT: waking up again - requested from .change()
[eitThread] dmxEIT restarted
Connection from UDS
version: 4, cmd: 16, numbytes: 1
data length: 8
Starting command 16
[sectionsd] Request of current/next information for 20085000a
Connection from UDS
version: 4, cmd: 24, numbytes: 1
data length: 16
Starting command 24
[sectionsd] commandserviceChanged: Service changed to 20085000a
--> '[sectionsd] commandserviceChanged: before messaging lock' 51.211000
--> '[sectionsd] commandserviceChanged: before wakeup' 0.682000
[sectionsd] commandserviceChanged: ignoring wakeup request...
--> '[sectionsd] commandserviceChanged: after doWakeup' 0.887000
dmx.read timeout - filter: 42 - timeout# 0[sdtThread] dmxSDT.getSection returned
after 252.018000
[sdtThread] sending to sleep (> TIME_SDT_SKIPPING)
dmxSDT: going to sleep...
dmx.read timeout - filter: 4e - timeout# 0dmx.read timeout - filter: 4e - timeou
t# 1dmx.read timeout - filter: 4e - timeout# 2[eitThread] dmxEIT restarted
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] got all packages for table_id 0x4f
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4f] (begin)
[eitThread] adding 1 events [table 0x4e] (begin)
[eitThread] got all packages for table_id 0x4e
--> 'changeDMX: before pthread_mutex_lock(&start_stop_mutex)' 3071.841000
--> 'changeDMX: after pthread_mutex_lock(&start_stop_mutex)' 1.498000
changeDMX [12]-> scheduled (0x50)
--> 'after DMX_SET_FILTER' 4.801000
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 4 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 3 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 3 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 5 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 5 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 8 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 3 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 4 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 5 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 2 events [table 0x50] (begin)
[eitThread] adding 1 events [table 0x50] (begin)
[eitThread] adding 3 events [table 0x50] (begin)
Segmentation fault
/var #