/dev/ost/qpskfe0: No such file or directory

Beiträge: 3
Registriert: Donnerstag 10. Januar 2002, 22:12

/dev/ost/qpskfe0: No such file or directory

Beitrag von SkiFighter »


Ich habe da ein kleine Problem mit meiner Sagem Box (Kabel 1xI). Aus irgend einem Grund kann ich EliteDVB nicht starten. Bleibt einfach hängen. Nutze im Moment die Version 1.0.17.

Beim booten bekomme ich folgendes angezeigt:


Restarting systedebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS

debug: BMon V1.3 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-df.9e.3f.08.00.00-3f
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root/platform/sagem-dbox2/kernel/os not found: Invalid argument
boot flash /root/platform/sagem-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: Invalid argument
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0204

will verify ELF image, start= 0x800000, size= 207425
verify sig: 262
Branching to 0x40000

ppcboot 0.6.4 (Jul 13 2001 - 00:15:59)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-3d-f7-49
LCD driver (KS0713) initialized
LCD logo at: 0x8A420 (0x1E00 bytes)
FB driver (AVIA-ENX) initialized
FB logo at: 0x80833 (0x9BC5 bytes)
Input: serial
Output: serial

1: Console on fb
2: Console on ttyS0
Select (1-4), other keys to stop autoboot: 0
Kernel image at: 0x10020034 (0x807D7 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 526230 Bytes = 513 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #97 Mon Aug 27 17:52:09 CEST 2001
Boot arguments: console=ttyS0 ro root=/dev/mtdblock/3
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 ro root=/dev/mtdblock/3
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30792k available (960k kernel code, 392k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20376kB/6792kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:3d:f7:49
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found no CFI device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var"
0x00160000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k in
Bummer, can't write to log on /dev/tty5!
console=/dev/consoleinit started: BusyBox v0.50 (2001.07.23-21:34+0000) multi-c
all biinsmod: /lib/modules/2.4.2/kernel/drivers/i2c/i2c-core.o: No such file or
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 03
feID: 00
fpID: 52
enxID: 03
gtxID: ffffffff
hwREV: 41
fpREV: 23
Lade soundcore
insmod: /lib/modules/2.4.2/kernel/drivers/sound/soundcore.o: No such file or dir
Lade avs
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).
Lade saa7126
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Lade event
event: init ...
Lade fp
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
Lade avia
Lade enx_core
enx-core: Loaded AViA eNX core driver
Lade demux
write event ...
write event ...
Lade cam
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Lade dmxdev
Lade dvbdev
Lade dvb
registering device.
Lade at76c651
i2c-core.o: driver AT76C651 DVB DECODER registered.
no AT76C651(B) found
i2c-core.o: driver unregistered: AT76C651 DVB DECODER
AT76C651: not found.
/lib/modules/2.4.2/misc/at76c651.o: init_module: Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
Lade enx_dmx
gen_dmx: found enx
ENX-INITed -> 0
there MIGHT be no TS :(
Lade enx_vbi
avia_vbi: version (Jan 30 2002-12:55:59)
avia_vbi: got demux C-Cube - AViA GTX/DMX
Lade enx_fb
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
Lade enx_capture
$Id: enx_capture.c,v 1.4 2001/12/01 06:37:06 gillem Exp $
Lade enx_pig
mkdir: /var/tuxbox/: File exists
mkdir: /var/tuxbox/config: File exists
mkdir: /var/tuxbox/config/zapit: File exists
mkdir: /var/tuxbox/config/elitedvb: File exists
mv: /var/etc/lcdmenu.conf: No such file or directory
mv: /var/neutrino.conf: No such file or directory
mv: /var/controld.conf: No such file or directory
ln: /var/tuxbox/ucodes: File exists
FTP4ALL 3.012, Copyright (C) 1996-2000 by Crescent (crescent@ftp4all.de)
This program is FREE SOFTWARE and distributed under GNU PUBLIC LICENSE
Server on host dbox is ready and listening on *:21
Base directory : /var
Readme file : (none)
Permission file: .permissions
Errlog file : log/ftpd.err
Log file : log/ftpd.log
Log program : (none)
Server program : /sbin/ftps
lcd.o: LCD driver (KS0713) module
[FONT] initializing core...
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Bold)
killall: startmenu: no process killed
Starte ezap
[1] 87
EliteDVB, Copyright (C) 2001 Felix Domke et al.
This is free software, and you are welcome
to redistribute it under certain conditions.
It is licensed under the GNU General Public License,
Version 2
1024k video mem
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth 4) not supported
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /share/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /share/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] adding font /share/fonts/Courier_New.ttf... failed: Operation not permitt
[FONT] adding font /share/fonts/Courier_New_Bold.ttf... failed: Operation not pe
[FONT] adding font /share/fonts/Courier_New_Italic.ttf... failed: Operation not
[FONT] adding font /share/fonts/Courier_New_Bold_Italic.ttf... failed: Operation
not permitted
[FONT] adding font /share/fonts/FONT1.ttf...OK (Swiss911 XCm BT/Regular)
[FONT] adding font /share/fonts/FONT2.ttf...OK (News Gothic Br Medium/Regular)
[FONT] adding font /share/fonts/FONT3.ttf...OK (SwitzerlandCondensed/Regular)
[FONT] adding font /share/fonts/Marlett.ttf...OK (Marlett/Regular)
[FONT] Intializing font cache, using max. 4MB...
[2218] [EPGC] Initialized EPGCache
/dev/ost/qpskfe0: No such file or directory
[1] Done /bin/ezap &
Thu Jan 1 01:00:08 CET 1970
Thu Jan 1 01:00:39 CET 1970

Please press Enter to activate this console.


Neutrino funktioniert ohne Probleme. Vielleicht hat ja jemand von euch einen Tip für mich.

D A N K E ! ! ! :D

Zurück zu „EliteDVB“