Premiere funktioniert nicht :(

Beitrag von **schnupfy** » Freitag 1. Juli 2005, 18:28

Hi@all,

ich habe mir von Premiere eine Karte schicken lassen(Sport-Abo) die für die dbox2 funktioniert:K02.
Ich habe dieses Image: alexW2xImageV1.7.1.200402171738r.img drauf gespielt.
Nun habe ich folgende ucodes nachgeschossen:

*edit* habe vergessen zu erwähnen, das meine dbox eine von Nokia mit 2 Intel-Chips ist und fürs Kabelnetz gedacht

*edit*

Avia 500: avia500v110
Avia 600: avia600vb022
UCode: ucode_0014
Com-Alpha: cam_01_02_002E

dann habe ich folgendes Log aus dem Terminal kopiert:

Code: Alles auswählen

debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID 01-d3.b6.27.07.00.00-ff
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 146964
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) (Oct 16 2003 - 18:02:34)

CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: . done.
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 604293 bytes loaded to 0x100000
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    604229 Bytes = 590.1 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.25-rc2-dbox2 (von alexW) (gcc version 3.2.3) #1 Fr Feb 13 17:5
8:58 CET 2004
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30900k available (1036k kernel code, 372k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:16:f9:e2
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
i2c-core.o: i2c core module version 2.8.4 (20040207)
i2c-dev.o: i2c /dev entries driver module version 2.8.4 (20040207)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'Using /lib/modules/2.4.2
5-rc2-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.25-rc2-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/dvb-core.o
SIOCADDRT: Invalid argument
Using /lib/modules/2.4.25-rc2-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.25-rc2-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/avs.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/saa7126.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.25-rc2-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.25-rc2-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.25-rc2-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.87 2004/01/30 08:24:42 zwen Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.44 2003/12/22 05:31:39 obi Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.201 2004/02/01 13:50:23 wjoost Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: loaded ucode v0014
avia_gt_dmx: hw section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.37 2003/09/30 05:45:35 obi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.53 2003/12/22 04:02:05 obi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.25-rc2-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
cdkVcInfo $Id: cdkVcInfo.c,v 1.7 2004/01/15 10:46:46 alexw Exp $

Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.25 2004/01/30 08:24:42 zwen Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.25-rc2-dbox2/misc/ves1820.o
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
Using /lib/modules/2.4.25-rc2-dbox2/misc/ves1x93.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.29 2003/12/22 05:31:39 obi Exp $
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.197 2004/02/01 13:50:23 wjoost Exp $
$Id: sectionsd.cpp,v 1.170 2004/02/15 20:25:34 thegoodguy Exp $
caching 504 hours
events are old 60min after their end time
$Id: zapit.cpp,v 1.342 2004/01/12 15:35:16 zwen Exp $
avia_gt_core: masking unhandled irq reg 0 bit 7
[camd] ca system id: 1722
$Id: controld.cpp,v 1.114 2004/01/01 18:49:49 thegoodguy Exp $

cync 0
[controld] Boxtype detected: (1, Nokia D-BOX2)
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] no card is in slot #2
[camd] a card is in slot #1
[nhttpd] Neutrino HTTP-Server starting..
[cdkVcInfo] Version (Image): 0107200402171738
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[camd] no card is in slot #2
[camd] a card is in slot #1
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[camd] set emm caid 1722 capid 1500
PES, queue 0 normal.
[camd] program number 0011 unsupported due to missing parental control
[neutrino] initialized everything
PES, queue 0 normal.
[camd] program number 0014 unsupported due to missing parental control
PES, queue 0 normal.
[camd] program number 0011 unsupported due to missing parental control

die letzten Meldungen sagen mir (als blutiger Anfänger) überhaupt nix. Die Karte sollte eigentlich gehen. Dort habe ich immer zwischen Premiere7 (kann ich nicht sehen) und dem Sport Portal(sollte gehen) gezappt. Woran könnte es liegen?

Vielen Dank im Voraus

Gruß Marcus

Beitrag von **DieMade** » Freitag 1. Juli 2005, 18:32

1. Falsche cam-alpha, siehe http://wiki.tuxbox-cvs.sourceforge.net/UCodes#Dateien und http://wiki.tuxbox-cvs.sourceforge.net/Smartcard

2. richtiger camd2 fehlt, siehe http://wiki.tuxbox-cvs.sourceforge.net/Camd2 und http://forum.tuxbox-cvs.sourceforge.net ... hp?t=29118

Beitrag von **schnupfy** » Freitag 1. Juli 2005, 19:22

Hi,

vielen Dank für die schnelle Antwort. Habe jetzt die richtige cam-alpha.bin drauf und auch die von "Dietmar" angebotene camd2 in var/bin copiert und auf execute gesetzt.

folgendes geschiet im log(kein Premiere):

Code: Alles auswählen

debug: BMon V1.0  mID 01
debug: feID 7a    gtxID 0b
debug: fpID 5a     dsID 01-d3.b6.27.07.00.00-ff
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 146964
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) (Oct 16 2003 - 18:02:34)

CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: . done.
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 604293 bytes loaded to 0x100000
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    604229 Bytes = 590.1 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.25-rc2-dbox2 (von alexW) (gcc version 3.2.3) #1 Fr Feb 13 17:5
8:58 CET 2004
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30900k available (1036k kernel code, 372k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:16:f9:e2
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
i2c-core.o: i2c core module version 2.8.4 (20040207)
i2c-dev.o: i2c /dev entries driver module version 2.8.4 (20040207)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'Using /lib/modules/2.4.2
5-rc2-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.25-rc2-dbox2/misc/tuxbox.o
info, client (v0.9.9-pre) started
Using /lib/modules/2.4.25-rc2-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.25-rc2-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/avs.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/saa7126.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.25-rc2-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.25-rc2-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.25-rc2-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.87 2004/01/30 08:24:42 zwen Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.44 2003/12/22 05:31:39 obi Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.201 2004/02/01 13:50:23 wjoost Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: loaded ucode v0014
avia_gt_dmx: hw section filters enabled.
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_core: masking unhandled irq reg 0 bit 7
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.37 2003/09/30 05:45:35 obi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.53 2003/12/22 04:02:05 obi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.25-rc2-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
cdkVcInfo $Id: cdkVcInfo.c,v 1.7 2004/01/15 10:46:46 alexw Exp $

Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.25 2004/01/30 08:24:42 zwen Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.25-rc2-dbox2/misc/ves1820.o
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
Using /lib/modules/2.4.25-rc2-dbox2/misc/ves1x93.o
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.29 2003/12/22 05:31:39 obi Exp $
Using /lib/modules/2.4.25-rc2-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.197 2004/02/01 13:50:23 wjoost Exp $
$Id: sectionsd.cpp,v 1.170 2004/02/15 20:25:34 thegoodguy Exp $
caching 504 hours
events are old 60min after their end time
$Id: zapit.cpp,v 1.342 2004/01/12 15:35:16 zwen Exp $
[camd] ca system id: 1722
$Id: controld.cpp,v 1.114 2004/01/01 18:49:49 thegoodguy Exp $

[cdkVcInfo] Version (Image): 0107200402171738
cync 0
[controld] Boxtype detected: (1, Nokia D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[camd] no card is in slot #2
[camd] a card is in slot #1
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[camd] no card is in slot #2
[camd] a card is in slot #1
[camd] no card is in slot #2
[camd] a card is in slot #1
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[camd] set emm caid 1722 capid 1500
PES, queue 0 normal.
[camd] starting onid 0001 sid 0011
[camd] set emm caid 1722 capid 1500
descramble onid: 0001 sid: 0011 status: 5050
[neutrino] initialized everything
PES, queue 0 normal.
[camd] starting onid 0001 sid 0014
[camd] set emm caid 1722 capid 1500
descramble onid: 0001 sid: 0014 status: 5050
PES, queue 0 normal.
[camd] starting onid 0001 sid 0011
[camd] set emm caid 1722 capid 1500
descramble onid: 0001 sid: 0011 status: 5050

irgendeine Idee?

Danke:)

gruß Marcus

Beitrag von **DieMade** » Freitag 1. Juli 2005, 19:27

Ja, lies bitte http://wiki.tuxbox-cvs.sourceforge.net/Camd2

Welche cam-alpha (genaue Version) ist jetzt drauf? Ältere cam-alpha haben Probleme mit der Freischaltung der aktuellen Karten.

Beitrag von **schnupfy** » Freitag 1. Juli 2005, 19:45

http://www.computer-kern.de/index.php?n ... oad&sid=20

hab von hier jetzt beide camds ausprobiert, keine funktioniert.

cam-alpha.bin hab ich cam_01_02_105D drauf.

hier die meldungen aus dem telnet:

Code: Alles auswählen

[camd] set emm caid 1722 capid 1500
[camd] program number 0203 unsupported due to missing parental control
[camd] program number 0011 unsupported due to missing parental control

liegt es vllt. doch an Premiere? Dann rufe ich da noch mal an

*edit* oder vllt. ein anderes Image, wenn ja, welches wäre da gut? thx

*edit*

Beitrag von **DieMade** » Freitag 1. Juli 2005, 19:49

Nein, lass die andere camd2 drauf bzw. mach die aktuelle wieder ausführbar.

Die cam-alpha ist OK und die andere camd2 hat sich ja auch korrekt gemeldet. Da fehlt nur noch die Freischaltung der Karte - das kann auch mal 1 Stunde dauern.

Beitrag von **schnupfy** » Freitag 1. Juli 2005, 19:51

DieMade hat geschrieben:Nein, lass die andere camd2 drauf bzw. mach die aktuelle wieder ausführbar.

Die cam-alpha ist OK und die andere camd2 hat sich ja auch korrekt gemeldet. Da fehlt nur noch die Freischaltung der Karte - das kann auch mal 1 Stunde dauern.

welche camd2 meinst du? die die jetzt drauf ist, oder die, die die Meldungen im letzten bootlog, welches ich gepostet habe, verursacht hat?

Beitrag von **DieMade** » Freitag 1. Juli 2005, 19:56

Menno, lies doch mal die Links, die ich poste. Da steht groß drin, daß die letzten Meldungen auf eine camd2 OHNE Premiere-Support hinweisen.

Beitrag von **schnupfy** » Freitag 1. Juli 2005, 20:05

jo, das klar, aber ich hab jetzt noch mal alle möglichen camd2 es durchprobiert und gezogen und keine gefunden, die premiere-support haben (laut fehlermeldung).
also immer:

1. program number XXXX unsupported due to missing parental control

Die camd2 enthält keinen Support für Premiere.

wie gesagt, habe alle durchprobiert und bei keiner kam was anderes

.
was mache ich noch falsch. will dir ja auch nicht auf den wecker gehen

thx.

Beitrag von **DieMade** » Freitag 1. Juli 2005, 20:06

[camd] starting onid 0001 sid 0011
[camd] set emm caid 1722 capid 1500
descramble onid: 0001 sid: 0011 status: 5050

Die Meldungen da passten doch - nur ist die Karte einfach nicht freigeschaltet.

Beitrag von **schnupfy** » Freitag 1. Juli 2005, 20:16

das witzige dabei ist, das die meldungen:

[camd] set emm caid 1722 capid 1500
descramble onid: 0001 sid: 0011 status: 5050

nur zu sehen sind wenn ich per dboxboot-programm drauf gehe. wenn ich mich per telnet einwähle kommen die nachrichten wenn ich es mit dieser variante probiere: http://wiki.tuxbox.org/Camd2

~/bin > killall camd2
~/bin > camd2
~/bin > [camd] ca system id: 1722
[camd] set emm caid 1722 capid 1500
[camd] program number 0203 unsupported due to missing parental control
[camd] program number 0011 unsupported due to missing parental control
[camd] program number 0203 unsupported due to missing parental control

welchem "log" kann man da glauben? ich werde auf jeden fall morgen noch mal bei premiere anrufen und noch einmal die karte frei schalten lassen. vllt. gehts ja dann

Aber danke schon mal für die Mühe die du dir gemacht hast.

gruß Marcus

Beitrag von **DieMade** » Freitag 1. Juli 2005, 20:18

Ja, dann hast Du /var/bin nicht im Pfad oder nicht vor /bin

Starte die camd2 mit /var/bin/camd2, dann passt das auch

PS: genau so steht es auch im Wiki:

Code: Alles auswählen

killall camd2 && /var/bin/camd2