### ERROR ### Please RESET the board ###

[Basssti]

hab eben eine nokia kable box geholt,sie war schon in debug wollte es flashen,allerdinings kommt mir sowas bei der konsole raus :

Boadebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-5d.2e.1f.07.00.00-db
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.2, My IP 192.168.2.23
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-5d.2e.1f.07.00.00-db
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.2, My IP 192.168.2.23
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

PPC823ZTnnA 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
### No HW ID - assuming TQM8xxL
(faked) 7c-a9-6d- FLASH: Machine check signal - probably due to mm fault
with mmu off
MSR: 00001002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00
GPR00: 01F9FF00 00000001 00000118 1003FFFF 01FE84F9 GPR08: 9421FFE0 00000000 000
00000 00000004 00031B58
GPR16: 00000000 00000000 80004000 00002580 GPR24: FF002FC0 01FC0000 00800000

01FCC520
### ERROR ### Please RESET the board ###

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-5d.2e.1f.07.00.00-db
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.2, My IP 192.168.2.23
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

GPR00: 0004C1B8 00000000 00067B7C 0000000A 00000000 FFFFFFFF GPR08: FF002FC0 000
5F0A7 00031B58 00067100
GPR16: 00000000 00000000 00000000 80004000 00002580
GPR24: FF002FC0
Call backtrace:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-5d.2e.1f.07.00.00-db
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.2, My IP 192.168.2.23
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: at MHz: 2 kB I-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata *** Board:
### No HW ID - assuming TQM8xxL
DRAM: 7c-a9-6d-d3
FLASH: Machine check signal - probably due to mm fault
with mmu off
MSR: 00001002 EE: 0 PR: 0 FP: 1 ME: 1 IR/DR: 00

0000FFFF 01F9FF00 00000001 00000118 1003FFFF GPR08: 00000043 00000000 00000000 0
0000004 00031B58 01FE7100
GPR16: 00000000 00000000 00000000 00000000 80004000 00000001 00002580 GPR24: FF0
02FC0 01FC0000 01F9FF40 00800000 01FD47FC

01FCC520 01FC23B0
machine check

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-5d.2e.1f.07.00.00-db
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.2, My IP 192.168.2.23
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnA 2 kB I-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: 7c-ff-d3
FLASH: Unknown values in msr
NIP: 01FC38A4 XER: 8000FB7F LR: 01FC2FA0 REGS: 00000200 TRAP: 0200 DAR: FF002808

MSR: 00009002 EE: 1 PR: 0 FP: 1 ME: 1 IR/DR: 00
GPR00: 01F9FE40 01FFFA7C 01FFFF20 01FFFFF8 GPR08: 00000000 01FFFA74 01FDFC84 000
00004 00031B58
GPR16: 00000000 00000000 00000001 00000000 GPR24: 00000100 01FFF994 01FFF99C 000
00000 01FFFA7C

01FD25D8 01FD26D0 01FD287C 01FD2B38
01F9FBE8 01FC23B0
machine check
### ERROR ### Please RESET the board ###

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-5d.2e.1f.07.00.00-db
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root>

wenn ich versuche die box normal zu starten scheint die in ne schleife zu hängen.
weiss einer einen rat?

[DieMade]

Mach mal ein Log von einem Speichertest (Pfeil hoch beim Einstecken gerückt halten).

[Basssti]

so sieht es aus :

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-5d.2e.1f.07.00.00-db
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>

[DieMade]

So aus der Ferne fallen mir da grade nur zwei mögliche Fehlerquellen ein:

- Flash (Leiterbahnen durchtrennt, Lötaugen durchstochen o.Ä.)
- CPU

[Basssti]

jetzt sieht es noch merkwürdiger aus :

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-5d.2e.1f.07.00.00-db
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.2, My IP 192.168.2.23
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-7c-a9-ff-6d-d3
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
BOOTP broadcast 2

Abort
LCD logo not found
BOOTP broadcast 1

Abort
FB logo not found
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot>

[SoLaLa]

Ethernet: 00-7c-a9-ff-6d-d3

ich tipp mal eher auf irgendwas mit den flashs

btw: warum sollte die denn überhaupt neu geflasht werden?

[Basssti]

ich denke das das iage das vorher drin war irgendwie nicht in ordnung war
,die ox hat angeblich über 2 jahre auf dem dachboden verstaubt gelegen.
die startet auch nicht mehr richtig.
wenn ich die versuche zu starten bekomme ich sowas zu sehen :

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-5d.2e.1f.07.00.00-db
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-5d.2e.1f.07.00.00-db
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 203252
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 20:57:43)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS LOAD ERROR<ffffffff> for vmlinuz!
=>