Ip address problem

[falkirkzidane]

I flashed my dbox2 nokia with a new image then i went to update, but instead ended up flashing the update also! Now the dbox and does the following below. It wont start so i can not get the ip address how do i get it too work again?


it says the kein system, i found this info on another site:

'There is "Kein Bystem" in the LCD after Flashing
Probably you flashed a wrong image. The image you have to flash depends on the number of Flash chips in your box.
For the Sagem with 1xIntel Flash you need an image with the designation 1x
For all other boxes you need a 2x Image.'

i used the 2x thought i just need to know the ip address of the box, so i can reflash.

[falkirkzidane]

Done some more reading on this, i think since i had a bad flash i need to reflash it using the boot manager and com port?

[PT-1]

ImageFlashingAssistant from http://www.hallenberg.com helps you

you flashed a 1x Image on a 2x Box or the other way around

No big deal

[falkirkzidane]

thanks for the help i'll give that a bash.

[falkirkzidane]

Thanks for the help PT-1 much appreciated. I ended up using one of your tutorials too i found on the net too do it! Kepp up the good work.