Bin da eine blutige Anfängerin, die zwar eine Vernetzung unter den Computern hinbekommt, aber mit der D-Box nicht mehr.
Untenstehend die ganzen Einstellungen…
Nun meine Fragen:
Wie bekomme ich den VLC-Mediaplayer zum Laufen? Bitte mir genaue Anweisungen geben.
Welche Einstellungen müssen vorgenommen werden, dass ich eine laufende Sendung aufnehmen kann, oder per EPG programmiere, denn es funktioniert nichts. Auch hier wäre ich sehr dankbar, wenn mir mitgeteilt wird, was da genau zu tun ist.
Was muss ich tun, damit ich beim umsortieren die Kanäle immer noch sehen kann? Denn danach geht nichts mehr. Nur ein erneutes programmieren (Image) löst das Problem.
Auf dem PC’s läuft kein Virenprogramm und Firewall. Kann die D-Box programmieren, aber nicht komplett auslesen und abspeichern, meist wird nur der Bootsektor ausgelesen, dann bleibt alles stehen.
Habe folgende Komponenten und Einstellungen:
Fritz Box IP: 192.168.178.1
PC1 IP: 192.168.178.20
PC2 IP: 192.168.178.24 Drahtloses Netzwerk
D-Box IP: 192.168.178.22
Einstellungen Netzwerk D-Box
DHCP aus
IP-Adresse: 192.168.178.22
Netzmaske 255.255.255.0
Broadcast 192.168.178.255
Standard Gateway 192.168.178.1
Nameserver 192.168.178.1
Netzwerk Aufnahme Mount:
Typ: NFS
Server IP: 192.168.178.24 (PC2 Notebook)
Verzeichnis/Freigabe: Aufnahme
Lokales Verzeichnis: /mnt/record (welche Einstellung dann am PC?)
Beim Start mounten: nein
Mount-Optionen: rw,soft,udp (was bedeutet das?)
Mount-Optionen: nolock,size=16384,wslze=32768
Benutzername: (keinen)
Passwort: (keines)
Mac Adresse: 11:22:33:44:55:66
Aufnahmeeinstellung:
Aufnahme Gerät: Server
Aufnahmeserver IP: 192.168.178.24
Aufnahmeserver Port: 4000 (welche Einstellung am PC?)
Aufnahmeserver WOL: aus
Playback anhalten: aus
Seclonsd anhalten: ein
Aufnahmestart-Korrektur: 00
Aufnahmeende-Korrektur: 00
In SPTS-Modus aufnehmen: ein
Movieplayer Einstellungen:
Streamingserver: Aktiviert
Streamingserver IP: 192.168.178.24 (PC2 Notebook)
Streamingserver Port: 8080
DVD Laufwerk: D
Verzeichnis (VLC): C:/Movies (am PC Verzeichnis C:/Movies)
Datenrate Video; 1000
Transcod. Auch mpg/vcd Video: nein
MPEG Video Codes: MPEG1
Auflösung: 704x576
Datenrate Audio: 192
Transcod. Audio (dvd/vcd/mpg): nein
Erzwinge AC3 bei avl: nein
Start-Verz.: /mnt/filme (wie muss das in den PC rein?)
Start-Plugin: Teletext
Einstellungen VLC-Mediaplayer 0.8.4a:
http://192.168.178.22 (IP von D-Box)
Streamausgabe: :sout=#duplicate{dst=std{access=http,mux=mpeg1,url=192.168.178.24:8080}}
IP 192.168.178.24 Port 8080 MPEG1
Etwas anderes habe ich nicht eingestellt oder verändert.
Einstellungen Netzwerkkarte PC:
PC1 mit COM-Port (wird zum programmieren verwendet)
IP-Adresse: 192.168.178.20
Subnetzmaske: 255.255.255.0
Standardgateway: 192.168.178.1
DHCP-Server: 192.168.178.1
DNS-Server: 192.168.178.1
WINS-Server:
PC2 (Notebook) ohne COM-Port
IP-Adresse: 192.168.178.24
Subnetzmaske: 255.255.255.0
Standardgateway: 192.168.178.1
DHCP-Server: 192.168.178.1
DNS-Server: 192.168.178.1
WINS-Server:
Hier der ausgelesene Bootssektor:
***Adapter Desc: ADMtek AN983 NDIS5 Driver (Microsoft's Packet Scheduler)
***MAC address: 00:30:05:1F:2E:E6 Local IP: 192.168.178.20 (via Packet-Driver #1)
***BootP server started... Port 67
***TFTP server started... Port 69
(steht oben)
---------------------------------------------------------------------------------------------
(steht unten)
dsID 01-e1-17-1b.07.00.00-d8
Boot-Vorgang erkannt, warte auf Auslesen an Port 27910… (manchmal steht da auch „Flash gelöscht, programmiere Image (seit 68:22 die Sekunden gehen weiter und es tut sich nichts mehr)“)
Started…
Statu NFS: 0 (RX) – 0 (TX)
Pinging DBoxII – ok (0ms)
---------------------------------------------------------------------------------------------
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 153668
verify sig: 262
Branching to 0x40000
U-Boot 1.1.2 (Tuxbox) (Dec 28 2005 - 01:56:29)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ...
.FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 666402 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 666338 Bytes = 650.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.31-dbox2 (image@tower) (gcc version 3.4.4) #2 Mi Dez 28 02:33:
07 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30832k available (1132k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1c:0f:01
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00540000 : "root (squashfs)"
0x00540000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.01 (2005.12.28-01:21+0000) multi-call bUsing /lib/modu
les/2.4.31-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/tuxbox.o
Using /var/modules/dvb-core.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.31-dbox2/misc/avs.o
Using /lib/modules/2.4.31-dbox2/misc/saa7126.o
Detected STB:
Vendor: Nokia
Model: D-BOX2
Using /lib/modules/2.4.31-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.31-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.31-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.31-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.31-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.31-dbox2/misc/ves1820.o
Using /lib/modules/2.4.31-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1893)...
Using /lib/modules/2.4.31-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.31-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.31-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.31-dbox2/misc/aviaEXT.o
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $
Using /lib/modules/2.4.31-dbox2/kernel/net/sunrpc/sunrpc.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.31-dbox2/kernel/fs/cifs/cifs.o
Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
/var/plugins/operations logcs_init
Thu Apr 6 11:33:14 2006
$Id: sectionsd.cpp,v 1.217 2006/02/08 21:15:50 houdini Exp $
caching 50 hours
events are old 120min after their end time
minutes between timeset 30
/var/plugins/operations camd_init
$Id: zapit.cpp,v 1.384 2005/11/28 21:59:54 Kroki & Worschter Exp $
[zapit] MAX_SOCKETS=3
[zapit] PMT update enabled
avia_gt_core: masking unhandled irq reg 0 bit 7
/var/plugins/operations cardserver_start
/var/plugins/operations camd_start
Using /var/modules/multicam.o
insmod: Warning: kernel-module version mismatch
/var/modules/multicam.o was compiled for kernel version 2.4.25-dbox2
while this kernel is version 2.4.31-dbox2
DBox2 Multicam Driver v1.01 skars & doz21
starte camd37xx
/var/plugins/operations check_camd3_socket
<14>06.04.2006 11:33:25 camd3: BOXTYPE: 1
<14>06.04.2006 11:33:25 camd3: LOG: 6
<14>06.04.2006 11:33:25 camd3: UDP_PORT: 20248
<14>06.04.2006 11:33:25 camd3: original slot au on
<14>06.04.2006 11:33:25 camd3: HTTP_PORT: 9080
<14>06.04.2006 11:33:25 camd3: LOG_HOST: 127.0.0.1:514
<14>06.04.2006 11:33:25 camd3: DNS_CACHE: 600 sec
<14>06.04.2006 11:33:25 camd3: SOCKET: /tmp/camd.sock01
<14>06.04.2006 11:33:25 camd3: KEYS: /var/keys/camd3.keys
<14>06.04.2006 11:33:25 camd3: SERVERS: /var/keys/camd3.servers
<14>06.04.2006 11:33:25 camd3: USERS: /var/keys/camd3.users
<14>06.04.2006 11:33:25 camd3: Slot /dev/tts/1: initialisiere...
<14>06.04.2006 11:33:26 camd3: Slot /dev/tts/1: starte Monitor...
<14>06.04.2006 11:33:26 camd3: Slot /dev/tts/1: bereit
<14>06.04.2006 11:33:27 camd3: original slot: CAID=1702
<14>06.04.2006 11:33:27 camd3: KeyDB: gestartet
<14>06.04.2006 11:33:27 camd3: camd v3.838a - erfolgreich gestartet
<14>06.04.2006 11:33:27 camd3: HTTP: started on port 9080
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 457 onid 1
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
/var/plugins/operations sect_renice
[LCDFONT] initializing core.../var/plugins/operations epg_reinit
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
starte epg_watchdog
dbox2 watchdog v0.81 by bsdice
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[basicsocket] send_data: Resource temporarily unavailable
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[sectionsd] getUTC: read: Connection timed out
[basicsocket] send_data: Resource temporarily unavailable
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] received 33 sats
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
PES, queue 0 normal.
[CBasicClient] connect failed: /tmp/camd.socket
avia_gt_core: masking unhandled irq reg 1 bit 15
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed: /tmp/camd.sock02
/tmp/camd.sock02: No such file or directory
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
Ab hier geht nichts mehr… HILFE, was mache ich da falsch?
---------------------------------------------------------------------------------------------
und fast immer kommt nur diese:
error while loading icon: /share/tuxbox/neutrino/icons/shutdown.raw
error while loading palette: /share/tuxbox/neutrino/icons/shutdown.pal
Mac;debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-e1.17.1b.07.00.00-d8
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.178.20, My IP 192.168.178.22
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_readflash
will verify ELF image, start= 0x800000, size= 207138
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Sep 19 2001 - 20:10:10)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1c-0f-01
FLASH: 8 MB
Input: serial
Output: serial
anykey druecken um flash auslesen abzubrech 0
BOOTP broadcast 1
Bootp from server 56.160.0.0; our IP address is 0.0.0.0
Sending Flash over UDP
nochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnoc
hmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmal