Meine D-Box2 Nokia mit 2xIntel Chips lädt nie ein Image zuende. Das könnt ihr auch an meiner log erkennen
----------------------------------------------------------------------------------------
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-5c.7f.2d.07.00.00-fb
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.24
debug: Sending TFTP-request for file C/DBOX/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1b-99-3c
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.24
Filename 'C/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.24
Filename 'C/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/SOFT/GLJ_neutrino_010406_V2_sat_2xi.img
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.24
Filename '/C/SOFT/GLJ_neutrino_010406_V2_sat_2xi.img'.
Load address: 0x120000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
#############
dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors
dbox2-ppcboot> erase 10020000 107fffff
Bus Fault @ 0x01f4zs8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9f900 Unknown values in msr
Bus Fault @ 0x01f4zs8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9f598 Machine check signal - probably due to mm fa
ult
with mmu off
Bus Fault @ 0x01f4zs8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9f230 Machine check signal - probably due to mm fa
ult
with mmu off
Bus Fault @ 0x01f4zs8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9eec8 Machine check signal - probably due to mm fa
ult
with mmu off
Bus Fault @ 0x01f4zs8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9eb60 Machine check signal - probably due to mm fa
ult
with mmu off
Bus Fault @ 0x01f4zs8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9e7f8 Machine check signal - probably due to mm fa
ult
with mmu off
Bus Fault @ 0x01f4zs8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9e490 Machine check signal - probably due to mm fa
ult
with mmu off
Bus Fault @ 0x01f4zs8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9e128 Machine check signal - probably due to mm fa
ult
with mmu off
Bus Fault @ 0x01f4zs8, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9ddc0 Machine check signal - probably dudebug: DDF
: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-5c.7f.2d.07.00.00-fb
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.24
debug: Sending TFTP-request for file C/DBOX/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1b-99-3c
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.24
Filename 'C/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
Abort
FB logo not found
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/SOFT/GLJ_neutrino_010406_V2_sat_2xi.img
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.24
Filename '/C/SOFT/GLJ_neutrino_010406_V2_sat_2xi.img'.
Load address: 0x120000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
#############################################################################
-----------------------------------------------------------------------------------------------------------------------------------------------------
Und so schauts aus wenn ich die D-Box hochfahren will
----------------------------------------------------------------------------------------------------------------------------------------------------
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-5c.7f.2d.07.00.00-fb
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032
will verify ELF image, start= 0x800000, size= 154948
verify sig: 262
Branching to 0x40000
U-Boot 1.1.4 (Tuxbox) (Apr 7 2006 - 19:38:48)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ...
.FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670653 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 669f89 Bytes = 654.9 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.32-dbox2 (image@tower) (gcc version 3.4.4) #2 Fr Apr 7 20:44:2
9 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1b:99:3c
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00540000 : "root (squashfs)"
0x00540000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
SQUASHFS error: zlib_fs returned unexpected result 0xfffffffd
SQUASHFS error: Unable to read cache block [51950c:8f6]
SQUASHFS error: Unable to read inode [51950c:8f6]
mount_devfs_fs(): unable to mount devfs, err: -2
Freeing unused kernel memory: 60k init
Warning: unable to open an initial console.
SQUASHFS error: zlib_fs returned unexpected result 0xfffffffd
SQUASHFS error: Unable to read cache block [51950c:1c4e]
SQUASHFS error: Unable to read inode [51950c:1c4e]
SQUASHFS error: zlib_fs returned unexpected result 0xfffffffd
SQUASHFS error: Unable to read cache block [51950c:b74]
SQUASHFS error: Unable to read inode [51950c:b74]
SQUASHFS error: zlib_fs returned unexpected result 0xfffffffd
SQUASHFS error: Unable to read cache block [51950c:8e7]
SQUASHFS error: Unable to read inode [51950c:8e7]
Kernel panic: No init found. Try passing init= option to kernel.
<0>Rebooting in 180 seconds..
------------------------------------------------------------------------------------------------------------------------------------------------
Ich hab schon echt ne menge versucht. Ich konnte sogar paar mal ein Image flashen aber sobald sich die D-Box einmal gefreezed is kam danach wieder loading kernel. Ich hoffe jemand kann mir sagen an was es liegt das ich vielleicht davon ein Ersatz kaufen könnte
