idebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-13.a5.89.07.00.00-ee
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/sagem-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/sagem-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0204
will verify ELF image, start= 0x800000, size= 202876
verify sig: 262
Branching to 0x40000
ppcboot 0.6.4 (Mar 2 2002 - 20:44:32)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-3b-0b-0b
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x84A7E (0x1E00 bytes)
FB logo at: 0x868A6 (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x84A22 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 543202 Bytes = 530 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (von alexW) (gcc version 3.0.4) #1 Son Mr 3 00:30:21 CET 200
2
Boot arguments: ro root=/dev/mtdblock/3 console=ttyS0
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/mtdblock/3 console=ttyS0
time_init: decrementer frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30748k available (984k kernel code, 412k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20328kB/6776kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:3b:0b:0b
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR Bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var ( JFFS2 )"
0x00160000-0x00760000 : "root ( CramFS )"
0x00760000-0x00800000 : "ppcboot"
0x00020000-0x00800000 : "GesamtesFlashohneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (
rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k in
init started: BusyBox v0.60.2 (2002.02.26-14:29+0000) multi-call Real Time Cloc
k Driver v0.1
i2c-core.o: i2c core module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mice: PS/2 mouse device common for all mice
Loading /share/keymaps/i386/qwertz/de.kmap.gz
Couldnt get a file descriptor referring to the console
event: init ...
Init VES1993 / AT76C651
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
event0: Event device for input0
mouse0: PS/2 mouse device for input0
AVIA: $Id: avia_core.c,v 1.27 2002/03/06 09:01:55 gillem Exp $
write 1 event's ...
write 1 event's ...
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
registering device.
i2c-core.o: driver AT76C651 DVB DECODER registered.
i2c-core.o: client [AT76C651] registered to adapter [](pos. 4).
registering frontend...
chip init
i2c-core.o: driver AT76c651 tuner driver registered.
tuner_attach_adapter
attach client
i2c-core.o: client [AT76c651 tuner] registered to adapter [](pos. 5).
enx-core: Loaded AViA eNX core driver
gen_dmx: found enx
ENX-INITed -> 0
there MIGHT be no TS
avia_vbi: version (Mar 7 2002-10:42:08)
avia_vbi: got demux C-Cube - AViA GTX/DMX
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
$Id: enx_capture.c,v 1.4 2001/12/01 06:37:06 gillem Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 3
Network LCD-Driver $Id: lcdd.cpp,v 1.42 2002/03/01 15:27:01 field Exp $
[FONT] initializing core...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Regular)
$Id: sectionsd.cpp,v 1.101 2002/03/07 18:33:43 field Exp $
caching 168 hours
events are old 60min after their end time
dmxdev: set buffer size 40000 -> 60000
Zapit $Id: zapit.cpp,v 1.83 2002/03/03 20:39:57 Simplex Exp $
[zapit] CAID is: 1722
[zapit] scanning a cable section
Segmentation fault
Controld $Id: controld.cpp,v 1.48 2002/03/07 18:32:34 field Exp $
set event: 00000009
SWITCH LETTER BOX
[nhttpd] Neutrino HTTP-Server starting..
dmxdev: set buffer size 40000 -> 60000
Connection refused
[nhttp]: connect to socket 1505 failedKeine Channelliste
httpd gestartet
NeutrinoNG $Id: neutrino.cpp,v 1.191 2002/03/07 18:32:34 field Exp $
1024k video mem
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/Arial.ttf...OK (Arial/Regular)
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] adding font /share/fonts/Arial_Italic.ttf...OK (Arial/Italic)
[FONT] adding font /share/fonts/Arial_Black.ttf...OK (Arial Black/Regular)
[FONT] Intializing font cache, using max. 4MB...
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth
not supported
enable flash
Software update enabled
[FONT] FTC_Face_Requester (Arial/Bold)
[FONT] FTC_Face_Requester (Arial/Regular)
dmxdev: set buffer size 40000 -> 60000
[FONT] FTC_Face_Requester (Arial/Italic)
doing network setup...
IP : 192.168.178.30current flash-version: 1.1.08032002-15.11dmxdev: set bu
ffer size 40000 -> 60000
neutrino: connect(zapit): Connection refused
The system is going down NOW !!
Sending SIGTERM to all processesSending SIGKILL to all processes.
The system is halted. Press CTRL-ALT-DEL or turn off power
System halt
. Vielen Dank schon mal...
, und machst anschliessend einen Sendersuchlauf (oder achtest darauf einen Linux-kompatiblen Editor zu nehmen,zB UltraEdit oder so, wenn du eine fertige einspielen willst). edit: Der Assi vergibt der Box dann eine passende IP...