Dbox friert nach ca. 1 Stunde ein ...

[schnixx]

Tag zusammen,

nen Kumpel hat ne 2er Nokia Sat Box und die friert immer nach knapp einer Stunde ein.
Hat schon verschiedene Images probiert, immer der gleiche Fehler.

Hier mal ein Log:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-49.59.1c.07.00.00-e8
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 154948
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Apr 27 2006 - 19:12:18)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ....... .
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 655164 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 655100 Bytes = 639.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.32-dbox2 #6 Do Apr 27 19:12:44 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30860k available (1112k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:df:95
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00480000 : "root (Squashfs)"
0x00480000-0x007e0000 : "var (JFFS2)"
0x007e0000-0x00800000 : "FLFS (U-Boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Detected STB:
Vendor: Nokia
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
route: SIOC[ADD|DEL]RT: Network is unreachable
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Starting pid 102, console /dev/console: '/etc/init.d/start'

Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

$Id: sectionsd.cpp,v 1.219 2006/03/26 20:13:49 Arzka Exp $
caching 504 hours
events are old 180min after their end time
$Id: zapit.cpp,v 1.387 2006/02/08 21:19:35 houdini Exp $
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld] setting VideoFormat to auto
[nhttpd] Neutrino HTTP-Server starting..
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...rm: cannot remove `/var/etc
/.sectionsd': No such file or directory
OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] menue setup
[controld] setting VideoFormat to auto
loading locales: scandir: No such file or directory
[neutrino] received 18 sats
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] registering as event client
[controld] setting VideoFormat to auto
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
[sectionsd] getUTC: read: Connection timed out
avia_gt_core: masking unhandled irq reg 0 bit 6
PES, queue 0 normal.
avia_gt_core: masking unhandled irq reg 0 bit 7
[CBasicClient] connect failed.avia_gt_core: masking unhandled irq reg 1 bit 15

/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[timeThread] time(): 04.02.2007 13:10:02, tim: Sun Feb 4 13:10:02 2007
[timeThread] time(): 04.02.2007 13:10:12, tim: Sun Feb 4 13:10:12 2007
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
avia_av_wdt_thread: video decoding stopped ==> restart
[controld] VIDEO_EVENT_SIZE_CHANGED 480x576 (4:3 -> 4:3)
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
[timeThread] time(): 04.02.2007 13:40:18, tim: Sun Feb 4 13:40:18 2007
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
[timeThread] time(): 04.02.2007 14:10:24, tim: Sun Feb 4 14:10:24 2007
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
zap failed!
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory
avia_av_wdt_thread: video decoding stopped ==> restart
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (16:9 -> 4:3)
[AVS] i2c error -121
[AVS] i2c error -121
[AVS] i2c error -121
[AVS] i2c error -121
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)

## 14:19 Uhr Box funktioniert nicht mehr ####

[Z80]

/tmp/camd.socket: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock01: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock03: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock04: No such file or directory
[CBasicClient] connect failed.
/tmp/camd.sock05: No such file or directory

jaja, schon klar, netter versuch. wir mögen es hier am liebsten auch noch verarscht zu werden.
man sollte schon wissen was man weg-editiert.

[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)

da war das tier wohl zu lange eingesperrt und ist verendet ...

[schnixx]

Hab das Bootlog so per Mail geschickt bekommen,
ich hab Kabel und kein Sat und dachte, da kann jemand helfen.
Ich hab da nix wegeditiert.

Hab meinem Kumpel bescheid gesagt, der flashed jetzt mal das JtG Image und dann melde ich mich mit dem Log noch mal.

Danke für die freundliche Hilfe.

[schnixx]

So, Fehler gefunden, Frontprozessor hin.
@Z80: Also nix mit Emu oder so..
Danke für die Hilfe !

[Z80]

So, Fehler gefunden, Frontprozessor hin.
@Z80: Also nix mit Emu oder so..
Danke für die Hilfe !

beruhigend zu wissen, dass du wirklich gar nix verstanden hast 'seepferdchen' ...
aber die 'spezialisten' der üblichen hohlkopfbards machen das schon.

[schnixx]

Gut das Du Dich so gut auskennst, aber helfen konntest Du bislang auch nicht. Rummeckern und Leute berichtigen kann jeder.

Daher mal an die die sich auskennen, hier mal nen Log von einem anderen Image:

[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by
/bin/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
[timeThread] - 06.02.2007 16:53:58, tim: Tue Feb 6 16:53:58 2007
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
PES, queue 0 normal.
avia_gt_core: masking unhandled irq reg 1 bit 15
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[sectionsd] readNbytes: received POLLERR
[sectionsd] readNbytes: received POLLERR
[sectionsd] readNbytes: received POLLERR
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (16:9 -> 4:3)
[sectionsd] readNbytes: received POLLERR
[sectionsd] readNbytes: received POLLERR
[sectionsd] readNbytes: received POLLERR
[sectionsd] readNbytes: received POLLERR
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
zap failed!
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
zap failed!
zapit shot down
Going to halt system now ...
Starting pid 143, console /dev/console: '/etc/init.d/halt'
CXA2092 found
CXA2092 found
Unmounting 'tmpfs' on '/tmp'
umount: Couldn't umount /tmp: No such file or directory
Unmounting 'jffs2' on '/var'
Ready to shutdown system...
The system is going down NOW !![yhttpd] !!! SIGNAL !!! :15!
[yhttpd] No special SIGNAL-Handler:15!
[yhttpd] stop requested......
Sending SIGKILL to all processes.
Requesting system halt.
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-49.59.1c.07.00.00-e8
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 158020
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Aug 7 2006 - 21:15:08)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670137 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670073 Bytes = 654.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.33.3-dbox2 (vom Jtg-Team) (gcc version 3.4.4) #1 Do Okt 26 15
:50:20 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:df:95
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Thu Jan 1 12:00:00 CET 1970
route: SIOC[ADD|DEL]RT: Network is unreachable
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 1.7 2006/08/01 22:04:55 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $
[sectionsd] Caching max 5000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
/tmp/currentservices.xml: No such file or directory
[camd] CA_SEND_MSG: Remote I/O error
[camd] CA_SEND_MSG: Remote I/O error
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[yhttpd] Webserver nhttpd/3.0.5 (yhttpd_core/1.1.1)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by
/bin/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
zap failed!
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[CPlugins] (id,val):(fd_lcd,20)
[CPlugins] (id,val):(rcblk_rep,25)
[CPlugins] (id,val):(rcblk_anf,0)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] try exec...
[sectionsd] getUTC: read: Connection timed out
result: -1
[CPlugins] exec ...
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
zap failed!
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
zap failed!
[sectionsd] getUTC: read: Connection timed out

[Tommy]

ucode.bin löschen (built in nehmen) und hw sections auf "Aus"

[schnixx]

Danke Thommy !!!

[Tommy]

ich habs in der Boardsuche gefunden - ich weiß net obs hülft aber Versuch ist's Wert. Der ENX verträgt sich wohl nicht mit HW Sections.

[schnixx]

So, Test abgeschlossen, das wars nicht.
Soll so sein das die Box manchmal einfriert, und manchmal einfach nur auf die Fernbedienung nich reagiert. Per FTP kommt man aber noch drauf. Manchmal findet die Box auch keine Sender mehr.
Hier noch mal nen Log:

[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
zapit shot down
Going to halt system now ...
Starting pid 146, console /dev/console: '/etc/init.d/halt'
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-49.59.1c.07.00.00-e8
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 158020
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Aug 7 2006 - 21:15:08)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670137 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670073 Bytes = 654.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.33.3-dbox2 (vom Jtg-Team) (gcc version 3.4.4) #1 Do Okt 26 15
:50:20 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1144k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:df:95
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Thu Jan 1 12:00:00 CET 1970
route: SIOC[ADD|DEL]RT: Network is unreachable
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 1.7 2006/08/01 22:04:55 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $
[sectionsd] Caching max 5000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
/tmp/currentservices.xml: No such file or directory
[camd] ca system id: 1702
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[yhttpd] Webserver nhttpd/3.0.5 (yhttpd_core/1.1.1)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by
/bin/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_core: masking unhandled irq reg 0 bit 7
PES, queue 0 normal.
[timeThread] - 08.02.2007 16:46:49, tim: Thu Feb 8 16:46:49 2007
avia_gt_core: masking unhandled irq reg 1 bit 15
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[sectionsd] readNbytes: received POLLERR
[sectionsd] readNbytes: received POLLERR
[sectionsd] readNbytes: received POLLERR
[AVS] i2c error -121
[AVS] i2c error -121
[AVS] i2c error -121
[AVS] i2c error -121
[AVS] i2c error -121
[AVS] i2c error -121
[AVS] i2c error -121
[AVS] i2c error -121
[AVS] i2c error -121
[AVS] i2c error -121
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)

[Liontamer]

Vermutlich ein thermisches Problem im Frontend (Tuner).
Kann aber theoretisch auch alles andere sein, was auf dem I²C Bus liegt.

Edit: Korrektur, ich tippe doch eher auf den Frontprozessor. Aber wie gesagt, wenn irgendein anderes Bauteil den I²C Bus stört, kommen auch die Befehle für den FP nichtmehr an.

[schnixx]

Alles klar, das hilft schon mal weiter, danke.