Ton/Bild sehr kurzfristig, danach vertikale bunte Streifen

[labsformance]

Hallo ihr Lieben!

Ich habe von einem Bekannten eine Nokia Sat dbox2 Avia500 mit einem yadi Image bekommen. Leider zeigt die dbox das Bild gar nicht richtig an bzw. eigentlich gar nicht.

Wie der Fehler genau ausschaut ist hier zu sehen: Ich hab dazu mal ein kleines Video als mpg (ca 5MB) analog aufgenommen, http://www.file-upload.net/download-191 ... r.mpg.html

Demnach bleibt entweder das Bild schwarz oder es bleiben vertikale Streifen mit einem Pfeifton, manchmal aber auch ohne Ton.

Ich weiss nicht, was mit der dBox vorher passiert ist und wer was an der Box gemacht hat und wie er es gemacht hat. Ich weiss nicht ob es vielleicht an den uCodes liegt, ob evtl. falsche drauf sind. Ich hab die dBox so bekommen. Original Software existiert nicht mehr für die Box. Ich habe schon andere Images versucht, mit den uCodes, die drauf waren, hat aber alles nichts gebracht.

Vielleicht gibt es ja jemanden, der mit soetwas schon zu tun hatte und kann mir Tips nennen!

Bin dafür sehr danbkar!

Lieben Gruß
Martin

EDIT:
Hier natürlich noch das Bootlog

Code: Alles auswählen

/debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID 01-a3.14.1c.07.00.00-0b
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 158020
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Feb  3 2007 - 12:11:32)

CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: .. done.
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 669446 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    669382 Bytes = 653.7 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.34-dbox2 (petze@linux) (gcc version 3.4.4) #2 Sa 3. Feb 12:47:
13 CET 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:99:67
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00540000 : "root (squashfs)"
0x00540000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call 
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Detected STB:
  Vendor: Nokia
  Model: D-BOX2 
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Starting pid 88, console /dev/console: '/etc/init.d/start'

Please press Enter to activate this console. Thu Jan  1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.235 2007/01/23 20:23:47 houdini Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/epgfilter.xml: No such file or directory
/var/plugins/operations camdstart
starte camd3
01.01.1970 01:00:04 camd3: BOXTYPE:  1
01.01.1970 01:00:04 camd3: LOG:  2
01.01.1970 01:00:04 camd3: UDP_PORT:  20248
01.01.1970 01:00:04 camd3: original slot au on
01.01.1970 01:00:04 camd3: HTTP_PORT:  9080
01.01.1970 01:00:04 camd3: DNS_CACHE:  600 sec
01.01.1970 01:00:04 camd3: SOCKET:  /tmp/camd.sock01
01.01.1970 01:00:04 camd3: KEYS:    /var/keys/camd3.keys
01.01.1970 01:00:04 camd3: SERVERS:   /var/keys/camd3.servers
01.01.1970 01:00:04 camd3: USERS:   /var/keys/camd3.users
01.01.1970 01:00:04 camd3: UserDB(new): USER=benutzer1 PASS=password2 FROM=any S
ERVICES=any
01.01.1970 01:00:04 camd3: original slot: CAID=1702

01.01.1970 01:00:04 camd3: UserDB(new): USER=benutzer110 PASS=password10 FROM=an
y SERVICES=1702:000000:0008:0:0,1722:000000:0008:0:0,
01.01.1970 01:00:04 camd3: UserDB(update): USER=benutzer110 PASS=password10 FROM
=any SERVICES=1702:000000:0008:0:0,1722:000000:0008:0:0,
01.01.1970 01:00:04 camd3: /var/keys/camd3.keys No such file or directory
01.01.1970 01:00:05 camd3: KeyDB: gestartet
01.01.1970 01:00:05 camd3: camd v3.868 - erfolgreich gestartet
01.01.1970 01:00:05 camd3: HTTP: started on port 9080
$Id: zapit.cpp,v 1.391 2007/01/21 19:07:17 houdini Exp $
[zapit] PMT update enabled
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading
.
[getservices] /var/tuxbox/config/zapit/myservices.xml  found.
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 1 onid 85
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[yhttpd] Webserver nhttpd/3.1.0 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 33 sats
[neutrino] registering as event client
[sectionsd] getUTC: read: Connection timed out
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_core: masking unhandled irq reg 0 bit 7
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file oavia_gt_core: masking unhandled irq reg 1 bit 15

r directory
[CBasicClient] connect failed.
/tmp/camd.sock02: No such file or directory
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
[timeThread] - 05.02.2007 18:21:23, tim: Mon Feb  5 18:21:23 2007
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart
avia_av_wdt_thread: video decoding stopped ==> restart

[jmittelst]

Ohne Log? Meinste, hier hat jemand eine funktionierende Glaskugel?

http://wiki.tuxbox-cvs.sourceforge.net/Bootlog

cu
Jens

[labsformance]

Hallo Jens!

Danke für's reinschauen!

Habe meinen Beitrag editiert!

Gruß
Martin

[jmittelst]

Dann wende Dich mal an die Leute, die mit Vogelkäfigen ihre Erfahrungen haben. Das ist nicht nur illegal, sondern hier auch unerwünscht!!!

cu
Jens

[labsformance]

So ganz werde ich aus deinem Posting nicht schlau, Jens
Kannst Du mir mal erläutern, was Du meinst?
Hab ich etwa etwas illegales getan

Gruß
Martin

[Z80]

(UNERWÜNSCHTER INHALT, Anm. d. Forenbetreibers)

[labsformance]

(UNERWÜNSCHTER INHALT, Anm. d. Forenbetreibers)

Hallo!

Ja, und was heißt das denn konkret?

Gruß
Martin

EDIT
Tut mir leid Jungs, hab jetzt gerade gelesen, dieses Image sei nicht ganz OK. Das wusste ich nicht. Erstaunlich, wie schnell man in die graue Zone abrutschen kann, ohne das man davon etwas mitbekommt . Ich setzt jetzt nochmal ein Yadi Image drauf und poste anschließend das Bootlog, in der Hoffnung, das mir jemand interessante Meinungen und Tips geben kann. Bis gleich

Martin

[labsformance]

Hallo!

Ja, hier ein Bootlog mit einem 2.1.0.3 Yadi Image, der Fehler bleibt weiterhin bestehen.

Code: Alles auswählen

'debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0  mID 01
debug: feID dd    gtxID 0b
debug: fpID 5a     dsID 01-a3.14.1c.07.00.00-0b
debug: HWrev X5  SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 160940
verify sig: 263
Branching to 0x40000


U-Boot 1.1.2 (Tuxbox) (May 26 2005 - 16:37:05)

CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: . done.
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 638456 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    638392 Bytes = 623.4 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #2 Do Mai 26
 17:25:49 CEST 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30880k available (1088k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:99:67
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'ti-call b
Using /lib/modules/2.4.27-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.27-dbox2/misc/avs.o
Using /lib/modules/2.4.27-dbox2/misc/saa7126.o
Detected STB:
  Vendor: Nokia
  Model: D-BOX2 
Using /lib/modules/2.4.27-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o
Thu Jan  1 01:00:00 CET 1970
Using /lib/modules/2.4.27-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.27-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/ves1820.o
Using /lib/modules/2.4.27-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1893)...
Using /lib/modules/2.4.27-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.27-dbox2/misc/aviaEXT.o
avia_gt_core: masking unhandled irq reg 0 bit 6
Using /lib/modules/2.4.27-dbox2/kernel/net/sunrpc/sunrpc.o
$Id: chkIVersion.cpp,v 1.6 2005/02/08 22:30:05 mogway Exp $
Yadi Snapshot vom 26.05.2005 15:51 - Image-Version 2.1.0.3
Networkcfg eth0: 192.168.5.51/255.255.255.0 gw 192.168.5.27
Startmode: Bootmenu - HWS:on
Using /lib/modules/2.4.27-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/cifs/cifs.o
Starting pid 93, console /dev/console: '/etc/init.d/start'

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.184 2005/05/
02 19:06:35 rasc Exp $
caching 504 hours
events are old 180min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.371 2005/04/17 06:56:15 metallica Exp $
avia_gt_core: masking unhandled irq reg 0 bit 7
/var/tuxbox/config/zapit/antiservices.xml: No such file or directory
[getservices] /var/tuxbox/config/zapit/myservices.xml  found.
[getservices] dup transponder id 457 onid 1
[camd] no card is in slot #2
[camd] no card is in slot #1
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[basicsocket] send_data: Resource temporarily unavailable
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
PES, queue 0 normal.
avia_gt_core: masking unhandled irq reg 1 bit 15
[controld] VIDEO_EVENT_SIZE_CHANGED 528x576 (4:3 -> 4:3)
[timeThread] time(): 05.02.2007 20:09:21, tim: Mon Feb  5 20:09:21 2007
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
avia_av: status timeout - chip didn't accept command 0x231
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
PES, queue 0 normal.
[timeThread] time(): 05.02.2007 20:09:47, tim: Mon Feb  5 20:09:47 2007
avia_av_wdt_thread: video decoding stopped ==> restart
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)

Danke für Eure Mühe,

Gruß
Martin

EDIT
Was ich noch vergessen habe, Radio Modus funktioniert einwandfrei!
Ich hab hier noch Screenshots vom Fehler:



Meiner Einschätzung nach, überwiegen die Farben in den Streifen, die im flüßigen Bild am meisten zu sehen sind.

Gruß
Martin

[dietmarw]

avia_av: status timeout - chip didn't accept command 0x231

[labsformance]

Hallo dietmarw,

Naja, soviel hab durch deine Antwort nicht finden können .
Ist das etwa ein Hardware Fehler, ist evtl. einer von den Avia Chips kaputt?

Streaming funktioniert einwandfrei.

[labsformance]

Hallo, noch jemand da?

[labsformance]

Ohne Log? Meinste, hier hat jemand eine funktionierende Glaskugel?

http://wiki.tuxbox-cvs.sourceforge.net/Bootlog

cu
Jens

Log ist da, kannste helfen?

mfg
martin

[DrStoned]

Ohne Log? Meinste, hier hat jemand eine funktionierende Glaskugel?

http://wiki.tuxbox-cvs.sourceforge.net/Bootlog

cu
Jens

Log ist da, kannste helfen?

mfg
martin

Am Besten hängst Du Dein Log das nächste mal in einer neuen Antwort an, und änderst nicht Deinen alten Beitrag. Wie soll man das sonst finden, ohne den ganzen Thread neu aufzurollen.

Greetz von DrStoned

[labsformance]

Hallöchen

Ähm, ich weiss nicht, was du genau meinst. Meinen alten Beitrag hab ich nich geändert. Mein neuer Log steht als neue Antwort...

Zum eigentlichen Thema: Kannst Du etwa helfen? Das würde nämlich diesem Thread hier viel besser tun

[DrStoned]

Vermutlich AVIA Chip defekt, genaueres können Dir wohl nur die Hardware-Experten sagen.

Greetz von DrStoned

[labsformance]

Wo sind die Hardware Experten hier

[Tommy]

Wo sind die Hardware Experten hier

Gurgel und Die Made

[labsformance]

mmmh anscheinend ist das Forum hier doch nicht so gut....

[jmittelst]

Von "PN" hast Du schon mal was gehört?
Damit kann man die gezielt anfragen. Nicht jeder schaut in "Anfängerfragen" regelmässig rein.

cu
Jens

[labsformance]

Von "PN" hast Du schon mal was gehört?
Damit kann man die gezielt anfragen. Nicht jeder schaut in "Anfängerfragen" regelmässig rein.

cu
Jens

1. FORUM

Was bedeutet Forum?
Forum (lateinisch ursprünglich „Umplankung“, später „Marktplatz“, „Versammlungsort“; Plural: Foren oder Fora, der englische Plural „forums“ ist im deutschen Sprachgebrauch falsch) ist (unter anderem):

* davon abgeleitet ein realer oder virtueller Ort, wo Meinungen untereinander ausgetauscht werden können, Fragen gestellt und beantwortet werden können, siehe Forum (Kultur)


2. "Nicht jeder schaut in "Anfängerfragen" regelmässig rein."

Wunderbar, dann muss man sich auch nicht wundern oder ärgern, das derartige Threads in anderen Bereichen gepostet werden...

Dadurch ist es ja dann doch zugegebenermaßen kein wirklich gutes Forum. Damit möchte ich aber auch nicht sagen, das es schlecht ist.