Grünstich im Menü+INTERNAL ERROR PLEASE REPORT im Video Menü

Alles eine Frage des Images
muuhhh!
Neugieriger
Neugieriger
Beiträge: 4
Registriert: Freitag 16. Februar 2007, 23:54

Grünstich im Menü+INTERNAL ERROR PLEASE REPORT im Video Menü

Beitrag von muuhhh! »

Hallo Leute!

Als erstes die Vorgeschichte:
Meine Box ist vor 2 Tagen einfach ausgegangen und das Netzteil hat immer wieder versucht zu "zünden". Es war mir klar dass irgendein Kondensator defekt sein muss. Dies konnte mit der "Mach mit dem Fön die Konis heiß Methode" leicht festgestellt werden. Wobei der CS18 schon Leicht dicke Backen gemacht hat. Gestern habe ich schnell einen neuen eingelötet und siehe da die Box startet wieder.

Jetzt die Probleme:
Leider musste ich feststellen das das LCD Display nicht mehr geht und das beim Booten ein grüner Bildschirm erschein bis ein Bild geladen wird. Wenn die Box mit dem starten fertig ist haben alle Menüs einen Grünstich. Die Hintergrundbilder scheinen alle in Ordnung zu sein. Als erstes habe ich vermutet das die Einstellung im Video-Menü nicht OK ist. Und dort stand es dann: INTERNAL ERROR PLEASE REPORT.

Man kann jetzt versuchen die Einstellungen so oft man möchte zu ändern. Es wird alles auf Standard zurückgesetzt. Als nächstes habe ich versucht die AVIA600.ux usw. zu löschen. Fehlanzeige. Sobald die Box neu gestartet wird ist sie wieder da. Und ich werde das Gefühl nicht los das der 600er Treiber geladen wird. :evil:

Zu guter letzt habe ich ein paar Images ausprobiert. Immer das gleiche Spielchen.

Ich weiß langsam nicht mehr weiter. Am liebsten hätte ich gerne noch mal ein Image versucht das nur mit dem ausgestattet ist was meine NOKIA AVIA500 2xA :D braucht. Vor allem was die AVIA-Treiber betrifft.

Ansonsten muß ich wohl oder übel eine Beerdigung vorbereiten. :cry:

Besten Dank
Muuhhh!
Z80
Erleuchteter
Erleuchteter
Beiträge: 710
Registriert: Dienstag 3. September 2002, 12:54

Beitrag von Z80 »

image wahrscheinlich geplatzt. neu flashen, ucodes rein - fertig.
ansonsten kann ohne bootlog nur geraten werden.
infos: wiki.tuxbox-cvs.sourceforge.net
Tommy
Tuxboxer
Tuxboxer
Beiträge: 4332
Registriert: Dienstag 7. Mai 2002, 17:04

Beitrag von Tommy »

vor der Beerdigung würde ich noch mal ein Bootlog machen
---------------------------
Alle weiteren Infos findest Du im WIKI
Bitte vor dem posten Boardregeln lesen und verstehen!
Wie erstelle ich ein Bootlog? Wo finde ich die FAQ?
muuhhh!
Neugieriger
Neugieriger
Beiträge: 4
Registriert: Freitag 16. Februar 2007, 23:54

Beitrag von muuhhh! »

Kein Problem.

Hier ist es:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-32.5b.e0.06.00.00-c3
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 155204
verify sig: 262
Branching to 0x40000


U-Boot 1.1.4 (Tuxbox) (Jul 24 2006 - 18:11:49)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ..... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 655164 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 655100 Bytes = 639.7 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.32-dbox2 (k2@debian) (gcc version 3.4.4) #5 Sa Aug 5 18:02:44
CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30860k available (1112k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:11:93:c1
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00400000 : "root (squashfs)"
0x00400000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
insmod: Warning: kernel-module version mismatch
/lib/modules/2.4.32-dbox2/misc/dbox2_fp_input.o was compiled for kernel
version 2.4.31-dbox2
while this kernel is version 2.4.32-dbox2
Detected STB:
Vendor: Nokia
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.89 2004/02/27 22:17:44 obi Exp $
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38AE6C0 XER: 20000000 LR: C38AEC58 SP: C1B77E20 REGS: c1b77d70 TRAP: 0200
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1b76000[55] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: C38AEC58 C1B77E20 C1B76000 00000080 00000000 C38B4000 C1C57CEC FDFFE000
GPR08: C1C57CC0 C38B4000 00000000 00000000 48008024 1006C738 00000001 10050000
GPR16: 00000001 10060000 100731B0 10072E88 00009032 C1B77EA0 C1AFD000 100851C4
GPR24: C1C579A0 0000000B C38B2000 C01335C8 00000000 C38B0FB0 C0140000 C38B0000
Call backtrace:
C38AEC58 C38AF6C4 C0010FF4 C000285C 1001C3B0 10003B3C 10003BB8
0FEC588C 00000000
Bus error
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38B68D8 XER: 20000000 LR: C38B6B1C SP: C1B77D90 REGS: c1b77ce0 TRAP: 0200
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1b76000[57] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: C38B6B1C C1B77D90 C1B76000 00000080 00000000 C38BE000 C1C573CC FDFFE000
GPR08: C1C57400 C38BE000 00000000 00000000 48008024 1006C738 00000001 10050000
GPR16: 00000001 10060000 100734A0 10073158 00009032 C1B77EA0 C1AD7000 C38C0000
GPR24: C1C573E0 00000007 C38BC000 C01335C8 FFFFFFEA 00000000 C0140000 C38B6000
Call backtrace:
C38B6B1C C38B87F8 C0010FF4 C000285C 1001C3B0 10003B3C 10003BB8
0FEC588C 00000000
Bus error
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1893a rev2
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
avia_gt_proc: $Id: avia_gt_proc.c,v 0.1.4 2006/04/16 Merandos/Skars/n772yk Exp $

avia_gt_proc: Description: GTX/eNX proc_dev Driver with proc_fs extension

OPTIONS:
(demux reinit) enx_reset=1
(framer chan.) fc_reset=0
(clr avia reg) avia=1
(enx td trace) trace=0
(lock, unlock) spinlock=1
Schreiben ueber avia_gt.o
(delay) delay=10

DBox2 Multicam Driver v1.01 skars & doz21 :)
insmod: Warning: kernel-module version mismatch
/var/etc/fmc/pcf8574.o was compiled for kernel version 2.4.31-dbox2
while this kernel is version 2.4.32-dbox2

***************************************
* Friedels MC Treiber pcf8574.o *
* Orginal : JohnDoo/DoppelD *
* Mod by : Logisch *
* Version : 0.08 *
***************************************
[pcf8574.c]: Einlesen der Konfig [/var/etc/fmc/fmc_treiber.cfg]
[pcf8574.c]: Speichern der Konfig [/var/etc/fmc/fmc_treiber.cfg]
i2c-core.o: driver PCF8574 Sensor Chip Driver registered.
[pcf8574.c]: attach_adapter
insmod: A module named sunrpc already exists
insmod: A module named lockd already exists
insmod: A module named nfs already exists
insmod: A module named cifs already exists
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $

init(LCD_MODE_BIN): Device or resource busy
Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 41E onid 1
[getservices] dup transponder id 420 onid 1
[getservices] dup transponder id 421 onid 1
[getservices] dup transponder id 423 onid 1
[getservices] dup transponder id 424 onid 1
[getservices] dup transponder id 427 onid 1
[getservices] dup transponder id 40A onid 1
[getservices] dup transponder id 40E onid 1
[getservices] dup transponder id 412 onid 1
[getservices] dup transponder id 416 onid 1
[getservices] dup transponder id 3F0 onid 1
[getservices] dup transponder id 400 onid 1
[getservices] dup transponder id 407 onid 1
[getservices] dup transponder id 408 onid 1
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 42A onid 1
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 42C onid 1
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 42E onid 1
[getservices] dup transponder id 430 onid 1
[getservices] dup transponder id 432 onid 1
[getservices] dup transponder id 434 onid 1
[getservices] dup transponder id 436 onid 1
[getservices] dup transponder id 4FF onid 1
[getservices] dup transponder id 438 onid 1
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 7 onid 85
[getservices] dup transponder id 442 onid 1
[getservices] dup transponder id 443 onid 1
[getservices] dup transponder id 444 onid 1
[getservices] dup transponder id 446 onid 1
[getservices] dup transponder id 447 onid 1
[getservices] dup transponder id 448 onid 1
[getservices] dup transponder id 449 onid 35
[getservices] dup transponder id 44B onid 1
[getservices] dup transponder id 44C onid 1
[getservices] dup transponder id 451 onid 35
[getservices] dup transponder id 454 onid 1
[getservices] dup transponder id 455 onid 35
[getservices] dup transponder id 456 onid 1
[getservices] dup transponder id 45A onid 1
/tmp/currentservices.xml: No such file or directory
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38B6098 XER: 20000000 LR: C38B6088 SP: C13D9E10 REGS: c13d9d60 TRAP: 0200
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c13d8000[130] 'zapit' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C13D9E10 C13D8000 00000001 000000E0 20006F06 00000000 C3B4C9E8
GPR08: 00000000 C38BE000 C38C0000 C0004BE0 84002028 1003489C 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 013D9F40 C3B4C9E8 C151C660
GPR24: C14ADB80 00000001 00000000 00000000 000000E0 00000000 00000000 00000000
Call backtrace:
C003D9D0 C3B4CEC0 C38895E4 C3884368 C0042B64 C000285C 00000000
10012EE8 10012FB8 1000F4C0 10011A5C 0FCBB88C 00000000
[camd] ca system id: 1702
[cinfo.socket] sucessfull created
$Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38B6098 XER: 00000000 LR: C38B6088 SP: C13E1DB0 REGS: c13e1d00 TRAP: 0200
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c13e0000[149] 'controld' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C13E1DB0 C13E0000 00000001 000003B0 C13E1E14 C13E1E50 C3B4C35C
GPR08: 00000000 C38BE000 C38C0000 C0004BE0 84002028 1002122C 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 013E1F40 C3B4C35C C151CEB0
GPR24: C14E99E0 00000002 00000000 C13E1E14 000003B0 00000000 400C6F37 C13E1E50
Call backtrace:
C13E1DB4 C38B8610 C3B4C68C C38895E4 C3884368 C0042B64 C000285C
7FFFFDA0 10006130 10006900 10005C00 0FC6888C 00000000
[nhttpd] Neutrino HTTP-Server starting..
clear failed: Device or resource busy
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Fette Engschrift/Regular)
[LCDFONT] Intializing font cache...
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[deutsch.locale] missing entry: moviebrowser.edit_book_name_info2
[deutsch.locale] missing entry: moviebrowser.edit_book_pos_info2
[deutsch.locale] has 2 missing entrys
clear failed: Device or resource busy
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
exit...(no lcd-support)
LCD-Init failed!
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] received 0 sats
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] registering as event client
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[cryptinfo.socket] sucessfull created
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[lcdd] set contrast failed!: Device or resource busy
[lcdd] set power failed!: Device or resource busy
[lcdd] set invert failed!: Device or resource busy
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
lcdd: CLCDDisplay::update(): write(): Device or resource busy
Tommy
Tuxboxer
Tuxboxer
Beiträge: 4332
Registriert: Dienstag 7. Mai 2002, 17:04

Beitrag von Tommy »

mach doch einfach mal ein neues image drauf - für dieses kriegst du hier eh keinen support
---------------------------
Alle weiteren Infos findest Du im WIKI
Bitte vor dem posten Boardregeln lesen und verstehen!
Wie erstelle ich ein Bootlog? Wo finde ich die FAQ?
muuhhh!
Neugieriger
Neugieriger
Beiträge: 4
Registriert: Freitag 16. Februar 2007, 23:54

Beitrag von muuhhh! »

Das ist nur das letzte Image welches ich versucht habe. Es hilft kein einziges. Ich kann natürlich das alte Image einspielen. Es dauer nur ein paar Minuten. Wenn es soweit ist erstelle ich einen neuen BootLog.

Bis gleich
muuhhh!
Neugieriger
Neugieriger
Beiträge: 4
Registriert: Freitag 16. Februar 2007, 23:54

Beitrag von muuhhh! »

Auf ein neues.

Hier ist der neue BootLog vom Yadi-Image:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-32.5b.e0.06.00.00-c3
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 160684
verify sig: 263
Branching to 0x40000


U-Boot 1.1.2 (Tuxbox) (Mar 16 2005 - 20:36:54)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 627248 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 627184 Bytes = 612.5 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #2 Mi Mr 16
21:18:16 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30904k available (1068k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:11:93:c1
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'ti-call b
Using /lib/modules/2.4.27-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.27-dbox2/misc/avs.o
Using /lib/modules/2.4.27-dbox2/misc/saa7126.o
Detected STB:
Vendor: Nokia
Model: D-BOX2
Using /lib/modules/2.4.27-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.27-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38AE720 XER: 20000000 LR: C38AED18 SP: C1BAFE20 REGS: c1bafd70 TRAP: 0200
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1bae000[53] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: C38AED18 C1BAFE20 C1BAE000 00000080 00000000 C38B5000 C1C1A56C FDFFE000
GPR08: C1C1A580 C38B5000 00000000 00000000 82008022 100607F0 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 10078E74 C1BCD000 C1BAFEA0
GPR24: C1C1A540 00000007 C38B3000 FFFFFFEA 00000000 C0130000 C38B1250 C38B0000
Call backtrace:
C38AED18 C38AF868 C0010780 C000257C 10075028 100159DC 10016D04
10003D18 10003954 0FEEF414 00000000
Bus error
Using /lib/modules/2.4.27-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.27-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/ves1820.o
Using /lib/modules/2.4.27-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1893)...
Using /lib/modules/2.4.27-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.27-dbox2/misc/aviaEXT.o
Using /lib/modules/2.4.27-dbox2/kernel/net/sunrpc/sunrpc.o
$Id: chkIVersion.cpp,v 1.6 2005/02/08 22:30:05 mogway Exp $
Yadi Release vom 16.03.2005 19:53 - Image-Version 2.1.0.0
Networkcfg eth0: 192.168.3.3/255.255.255.0 gw 192.168.3.1
Startmode: Bootmenu - HWS:on
Using /lib/modules/2.4.27-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/cifs/cifs.o
Starting pid 90, console /dev/console: '/etc/init.d/start'

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.181 2005/03/
08 13:39:08 metallica Exp $
caching 504 hours
events are old 180min after their end time
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.370 2005/03/14 19:58:48 mws Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading
.
[camd] no card is in slot #2
[camd] no card is in slot #1
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38AD098 XER: 20000000 LR: C38AD088 SP: C1541E00 REGS: c1541d50 TRAP: 0200
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1540000[120] 'zapit' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C1541E00 C1540000 00000001 000000E0 20006F06 00000000 C3B43954
GPR08: 0FD4D41C C38B5000 C38B0000 C00047E0 84000042 100356EC 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01541F40 C3B43954 C16A3C80
GPR24: C16DED30 00000001 00000000 00000000 000000E0 00000000 00000000 00000000
Call backtrace:
C003CB94 C3B43B9C C38894F4 C3884368 C0041818 C000257C 3000A17C
10014144 10014218 10011868 10012264 0FC9A414 00000000
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[ConfigFile] Unable to open file /var/tuxbox/config/controld.conf for reading.
[controld] /var/tuxbox/config/controld.conf not found
[controld] Boxtype detected: (1, Nokia D-BOX2)
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38AD098 XER: 00000000 LR: C38AD088 SP: C14CBDD0 REGS: c14cbd20 TRAP: 0200
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c14ca000[122] 'controld' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C14CBDD0 C14CA000 00000001 000003B0 C14CBE2C C14CBE50 C3B43420
GPR08: 00000014 C38B5000 C38B0000 C00047E0 84000022 1001F3EC 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 014CBF40 C3B43420 C172D6D0
GPR24: C1760440 00000002 00000000 C14CBE2C 000003B0 00000000 400C6F37 C14CBE50
Call backtrace:
014CBF40 C38AF69C C3B437C0 C38894F4 C3884368 C0041818 C000257C
00000001 10004F58 10005468 10004588 0FC74414 00000000
[nhttpd] Neutrino HTTP-Server starting..
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
clear failed: Device or resource busy
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
exit...(no lcd-support)
LCD-Init failed!
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] received 0 sats
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] registering as event client
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[lcdd] set contrast failed!: Device or resource busy
[lcdd] set power failed!: Device or resource busy
[lcdd] set invert failed!: Device or resource busy
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[neutrino] initialized everything
[sectionsd] getUTC: read: Connection timed out
[lcdd] set contrast failed!: Device or resource busy
[lcdd] set power failed!: Device or resource busy
[lcdd] set invert failed!: Device or resource busy
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
lcdd: CLCDDisplay::update(): write(): Device or resource busy
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[lcdd] set contrast failed!: Device or resource busy
[lcdd] set power failed!: Device or resource busy
[lcdd] set invert failed!: Device or resource busy
lcdd: CLCDDisplay::update(): write(): Device or resource busy
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[lcdd] set contrast failed!: Device or resource busy
[lcdd] set power failed!: Device or resource busy
[lcdd] set invert failed!: Device or resource busy
lcdd: CLCDDisplay::update(): write(): Device or resource busy
lcdd: CLCDDisplay::update(): write(): Device or resource busy
lcdd: CLCDDisplay::update(): write(): Device or resource busy