Image flashen

[Ruderer]

bekomme untenstehende Meldung, was soll ich tun?

***Adapter Desc: NVIDIA nForce MCP Networking Controller Driver (Microsoft's Packet Scheduler)
***MAC address: 00:30:1B:3A:A8:CB Local IP: 192.168.5.3 (via Packet-Driver #0)
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\Programme\DBoxBoot\ppcboot_writeflash"...
TFTP> Transfer finished, sent 394 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\Programme\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\Programme\DBoxBoot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\Programme\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\Programme\DBoxBoot\logo-fb"...
TFTP> Transfer finished, sent 85 blocks
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\Programme\tftpboot\kernel-cdk"
TFTP> Couldn't initiate TFTP-transfer! (possibly file not found)
TFTP> Non-BootP TFTP-transfer requested "C\Programme\tftpboot\kernel-cdk"
TFTP> Couldn't initiate TFTP-transfer! (possibly file not found)

[mash4077]

Hi,

http://www.dietmar-h.net/flashprob.html#kernel

Gruß
mash

[SoLaLa]

auf <image flashen> klicken, nicht auf <start>

[Ruderer]

das tue ich ja.
zeigt immer das selbige an. in der Box leuchtet dann irgendwann mal neutrino auf.

[Holzklotz]

http://www.hallenberg.com/

Freie Software Flashing-Assist downloaden und damit testen