Probleme beim neu flashen

Wie blitze ich ein Bild - Permanent Outgoing Incomes
JackC
Neugieriger
Neugieriger
Beiträge: 16
Registriert: Montag 3. Juli 2006, 11:46

Probleme beim neu flashen

Beitrag von JackC »

Hallo,

ich hab leztens auf das neue Neutrino Image Updaten wollen. Yadi Version 2.2.0.4. Das Update lief auch ohne probleme durch. Dann startete die dbox neu und bleibt nun immer an der selben Stelle hängen. Ich hab mal ein Nullmodemkabel angeschlossen und hier der Consoleninhalt:

Retry count exceeded; starting again
=debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-44.21.26.07.00.00-a2
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 160940
verify sig: 263
Branching to 0x40000


U-Boot 1.1.2 (Tuxbox) (May 26 2005 - 16:37:05)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
SQUASHFS error: unsupported squashfs version 3.0
### FS LOAD ERROR<0> for vmlinuz!
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=>




Nun versuche ich natürlich wieder ein Komplettimage drauf zu spielen. Leider funktioniert dies auch nicht, da anscheinend keine IP Adresse der dbox zugewiesen werden kann. Hier der Consoleninhalt:

=debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-44.21.26.07.00.00-a2
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 160940
verify sig: 263
Branching to 0x40000


U-Boot 1.1.2 (Tuxbox) (May 26 2005 - 16:37:05)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
=> bootp 120000 /C/200703171600_neutrino_yadi_squashfs_head_2x.img
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4



habs auch schon mit einer anderen Netzwerkkarte versucht. Leider ohne Erfolg. Hat jemand ne Idee was ich nun noch versuchen kann?
JackC
Neugieriger
Neugieriger
Beiträge: 16
Registriert: Montag 3. Juli 2006, 11:46

Beitrag von JackC »

ah ok hab mich noch bissel in anderen Beiträgen und Seiten umgesehn und nun die Lösung gefunden.

-dbox reseten
-pfeil nach oben Taste gedrückt halten, dadurch wird ein Memory-Check ausgelöst und die DBox2 bleibt mit einem Prompt in der seriellen Konsole stehen
-"boot net" eingeben

dann wurde die IP adresse zugewiese und das image kopiert :D