Loading Kernel

[brillo]

Ich hoffe, Ihr könnt mir weiterhelfen. Bei meiner Nokia 2xl Sat erscheint nach dem Flashen (loading Kernel) und bleibt dann stehen. Zwei Images hatte ich dabei, bei der sie dann nach dem "Loading Kernel" neu gestartet ist. Hier einmal mein Log:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: unknown demodulatordebug: BMon V1.2 mID 01
debug: feID 00 gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.178.24, My IP 192.168.178.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##

Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################

Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: #################################################################
##########################################################

Bytes transferred = 626108 (98dbc hex)
Using SCC ETHERNET device
TFTP from server 192.168.178.24; our IP address is 192.168.178.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: #################################################################
#################################################

Bytes transferred = 579075 (8d603 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 626044 Bytes = 611.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
Image Name: Ramdisk Image
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 579011 Bytes = 565.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 01f21000, end 01fae5c3 ... OK
Linux version 2.4.36-dbox2 (Hallenberg.com) (gcc version 3.4.6) #2 So 6. Jan 18:22:41 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.178.202:192.168.178.24:::::off
Decrementer Frequency = 251625000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30356k available (1048k kernel code, 324k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:45:58:34
RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (rootfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.178.202, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.178.202, domain=, nis-domain=(none),
bootserver=192.168.178.24, rootserver=192.168.178.24, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 565k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
init started: BusyBox v1.9.0 (2008-01-05 13:28:28 CET)
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface




















dbox2 - ImageFlashingAssistent 3.0

- Hallenberg.com -



Schreibe Backup: 8064k von 8064k (100%)
Lade Flashimage...
.
Sende Backup...
Lösche Sektoren: 63 von 63 (100%)
Schreibe Daten: 8064k von 8064k (100%)
Verifziere Daten: 8064k von 8064k (100%)

Sie koennen die dbox jetzt ausschalten.

-------------------------------------------------------------
BootP: Request von 00509C455834 erhalten
BootP: ARP-Eintrag mit IP: 192.168.178.202 und Mac: 00509C455834 gesetzt
BootP: Antwort an 00509C455834 gesendet
TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C455834 erhalten
BootP: ARP-Eintrag mit IP: 192.168.178.202 und Mac: 00509C455834 gesetzt
BootP: Antwort an 00509C455834 gesendet
TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C455834 erhalten
BootP: ARP-Eintrag mit IP: 192.168.178.202 und Mac: 00509C455834 gesetzt
BootP: Antwort an 00509C455834 gesendet
TFTP: Sende C:\Programme\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Programme\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Programme\DBOX_IFA\tftp\u-initrd
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\dbox2\200505261551_neutrino_yadi_squashfs_head_2x.img
TFTP: Transfer erfolgreich beendet
TFTP: Schreibe Backup nach C:\Programme\DBOX_IFA\Backups\2008-03-12 17-38-11_991.img
TFTP: Transfer erfolgreich beendet

------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Realtek RTL8139-Familie-PCI-Fast Ethernet-NIC #2 - Paketplaner-Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.178.24
IP-Adresse die die dbox bekommt: 192.168.178.202
Betriebssystem: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
CPU 1: Mobile AMD Sempron(tm) Processor 3300+ @ 2000 MHz
Dateiname des Images: 200505261551_neutrino_yadi_squashfs_head_2x.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 3.1
------ Powered by http://www.dboxservice-hallenberg.de ------

Vielen Dank im voraus.

[Liontamer]

Das ist ein Log von einem erfolgreichen Flashvorgang.
Ein Log vom Bootvorgang wäre aber viel interessanter!

[brillo]

Hier ein Bootlog:

FfbFvswV/VV VbGewrbZZ ^Sjbgjo^,zvsW
~ SvF_VVgv&O
W_OK/KOKOKOKOKOKOKOKOk6NgJ[G~0FZ&[nFZkc(PBB ~L1Q-bBoG&v ggNbvrrvvR~QgRb'ZGZwz
~b 3 3 cgW obWF~rB~fOFjvGz~Rb&wJ@VV@^vCFwGn>*~Z-JBVJBNgb@nw~(ZmF;sT_r
NfJ1K/'j"w
**kf{RsOO~Vs^ ~Mdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMI
PS
debug: unknown demodulatordebug: BMon V1.2 mID 01
debug: feID 00 gtxID 0b
debug: fpID 5a dsID 01-11.23.82.07.00.00-43
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 160940
verify sig: 263
Branching to 0x40000


U-Boot 1.1.2 (Tuxbox) (May 26 2005 - 16:37:05)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 638456 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 638392 Bytes = 623.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #2 Do Mai 26
17:25:49 CEST 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 251625000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30880k available (1088k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:45:58:34
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'ti-call b
Using /lib/modules/2.4.27-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.27-dbox2/misc/avs.o
Using /lib/modules/2.4.27-dbox2/misc/saa7126.o
Detected STB:
Vendor: Nokia
Model: D-BOX2
Using /lib/modules/2.4.27-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
cam: no firmware file found
Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o
Thu Jan 1 01:00:00 CET 1970
Using /lib/modules/2.4.27-dbox2/misc/avia_av.o

Vielen Dank schon einmal für Eure Hilfe. Ich hoffe, die Box ist noch zu retten.

[seife]

Gib mal "unknown demodulatordebug" in die Suchfunktion ein.