nach Flashen, weiße Streifen im Bild

[cascadac]

Hallo,

ich habe gestern meine zwete Philips D-Box auf Neutrino umgebaut.

Nach dem Flashen habe ich jetzt im TV Bild weiße senkrechte Streifen. Diese Streifen sind beim Booten der Box noch nicht da, erst wenn das eigentliche Fernsehbild kommt.

Wenn ich im Menü unterwegs bin, dann habe ich die Streifen im Menü auch, aber im dahinterliegenden Fernsehbild nicht!

Wenn ich das Fernsehbild am PC ansehe, als über Netzwerk, sind die Streifen nicht da.


Waran kann das liegen?

Habe schon verschiendene Images ausprobiert und auch schon mein Scart Kabel gewechselt!

[dwilx]

Bootlog?

[cascadac]

was meinst du mit Bootlog?

[seife]

http://wiki.tuxbox-cvs.sourceforge.net/wiki/Bootlog

Ich tippe aber auf einen Hardware-Schaden, eNX oder die zugehörigen RAMs kaputt.

[cascadac]

Hier mal der Bootlog der Box.
Ich hoffe das mir jemand weiterhelfen kann!

ïdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-fc.b4.01.08.00.00-c8
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 162964
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (Dec 24 2007 - 11:57:50)

CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Philips, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .... .
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 669865 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 669801 Bytes = 654.1 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image
Linux version 2.4.35.3-dbox2 (image@Server) (gcc version 3.4.6) #21 Mo Dez 24 11
:58:22 CET 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 247125000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30824k available (1140k kernel code
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@a
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2c:ac:c5
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x005e0000 : "root (squashfs)"
0x005e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.7.2 (2007-12-24 12:02:36 CET)


##### Image-Version: Keywelt_Dez2007_V1 #####

Mon Dec 24 12:17:00 UTC 2007
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Detected STB:
Vendor: Philips
Model: D-BOX2
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.35.3-dbox2/misc/dvb-core.o was compiled for kernel vers
ion 2.4.34-dbox2
while this kernel is version 2.4.35.3-dbox2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.35.3-dbox2/misc/dbox2_fp_input.o was compiled for kerne
l version 2.4.34-dbox2
while this kernel is version 2.4.35.3-dbox2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.35.3-dbox2/misc/avia_av.o was compiled for kernel versi
on 2.4.34-dbox2
while this kernel is
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Ex
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.35.3-dbox2/misc/tda8044h.o was compiled for kernel vers
ion 2.4.34-dbox2
while this kernel is version 2.4.35.3-dbox2
DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.255 2007/12/
16 11:53:31 seife Exp $
[sectionsd] Caching max 3000 events
[sectionsd] Caching 7 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
/var/plugins/operations camd_init
/var/plugins/operations cardserver_start
$Id: zapit.cpp,v 1.403 2007/11/08 19:32:15 Kroki & Worschter & SnowHead Exp $
[zapit] MAX_SOCKETS=3
[zapit] PMT update enabled
[frontend] uncommitted_switch_
/var/plugins/operations camd_start
insmod: warning: kernel-module version mismatch
/var/modules/multicam.o was compiled for kernel version 2.4.34-dbox2
while this kernel is version 2.4.35.3-dbox2
DBox2 Multicam Driver v1.01 skars & doz21
starte camd3
/var/plugins/operations check_camd3_socket
24.12.2007 12:17:26 camd3: BOXTYPE: dbox2
24.12.2007 12:17:26 camd3: LOG: 6
24.12.2007 12:17:26 camd3: UDP_PORT: 20248
24.12.2007 12:17:26 camd3: original slot au on
24.12.2007 12:17:26 camd3: HTTP_PORT
24.12.2007 12:17:26 camd3: LOG_HOST: 127.0.0.1:514
24.12.2007 12:17:26 camd3: DNS_CACHE: 60 sec
24.12.2007 12:17:27 camd3: DESCR_DELAY: 0 ms
24.12.2007 12:17:27 camd3: UserDB(add): USER=benutzer1 PASS=password2 FROM=any
SERVICES=all
rdate: timeout connecting to time server
24.12.2007 12:17:27 camd3: UserDB(add): USER=benutzer110 PASS=password10 FROM=a
ny SERVICES=1702:000000:0008,1722:000000:0008,
24.12.2007 12:17:27 camd3: UserDB(update): USER=benutzer110 PASS=password10 FRO
M=any SERVICES=1702:000000:000
24.12.2007 12:17:27 camd3: original slot: CAID=1702
starte mgcamd
24.12.2007 12:17:33 camd3: KeyDB: started
24.12.2007 12:17:34 camd3: HTTP: started on port 9080
tuxbox mgcamd v1.27b by mixvt (compiled Dec 31 2007 Fun4All)
[mg] Net:4:7:1:10s Show ecm:1, emm:1 Up:5 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:2:1
72.16.1.1:28007 Reread:4
[mg] Ecm cache time: 15
Box type: dbox2
/dev/dvb/adapter0/ca1 error 16: Device or resource busy
Conax.Key error 2: No such file or directory
Keys readed
Conax.Key error 2: No such file or d
[mgcam] emm thread started
[mgcamd] tps update started.
24.12.2007 12:17:35 camd3: Slot /dev/tts/1: (carddetect=password1) initialisiere
...
24.12.2007 12:17:35 camd3: Slot /dev/tts/1: starte Monitor...
24.12.2007 12:17:35 camd3: slot /dev/tts/1: ready
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder
/tmp/currentservices.xml: No such file or directory
24.12.2007 12:17:37 camd3: camd v3.897 - erfolgreich gestartet
$Id: controld.cpp,v 1.127 2007/07/01 08:40:13 dbluelle Exp $

[controld] Boxtype detected: (2, Philips D-BOX2)
[controld]: ROUTEVIDEO v1 = 1 a1 = 1 v2 = 1 a2 = 1 v3 = 1 a3 = 1 fblk=1
SET VSW: 0 1
SET VSW: 1 1
SET VSW: 2 1
[yhttpd] Webserver nhttpd/3.1.6 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily un
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
/var/plugins/operations sect_renice
/var/plugins/operations epg_reinit
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
[sectionsd] getUTC: read: Connection timed out
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] received 44 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
rdate: timeout connecting to time server
zap failed!

[DrStoned]

Da hat Dir der Emu wohl ein fettes Ei in die Box gelegt.
http://forum.tuxbox-cvs.sourceforge.net ... 23&t=46283

Greetz von DrStoned

[cascadac]

Da hat Dir der Emu wohl ein fettes Ei in die Box gelegt.
http://forum.tuxbox-cvs.sourceforge.net ... 23&t=46283

Greetz von DrStoned

Ob EMU oder nicht EMU interessiert mich nicht, die Probleme hatte ich auch mit dem JtG Image! Ich habe nur zur Zeit ein Image aus einer baugleichen Philips D-Box eingespielt.

[dwilx]

Wenn Du ein Bootlog vom JTG reinschiebts, ist das kein Problem, dafür gibts hier Leute, die da einiges erkennen können.

Ob EMU oder nicht EMU interessiert mich nicht

Mag sein, das geht aber so nicht. Hier gibts gewisse Regeln. Die haben die Anbieter solcher Images auch, die selbstgefällig und um ihr Gewissen rein zu halten sogar fast die gleichen Ansichten vertreten wie das hier der Fall ist, nur wie die das handhaben, ist mehr als fragwürdig. Da wird soviel an omnösen Support reingefrickelt, von dem ja angeblich nichts illegal ist und ja überhaupt kein illegaler Hack unterstützt wird, dein Bootlog spricht Bände. Wie soll man da noch von gut und schlecht unterscheiden können. Andernfalls bleibt nur Seifes Option und das ist nicht so toll.