Dbox2 Philips kein Empfang

Boxenweitwurf
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Dbox2 Philips kein Empfang

Beitrag von Makel »

Hallo,

wer kann mir helfen? :gruebel:
Habe eine Philips dbox2 Linux gebraucht gekauft. Hat nur eine Std. gelaufen. Erst knirschte das Bild in alle Farben, der Ton genau so und dann war ganz Ende mit dem Bild und Ton.
Der Sendername steht jetzt immer in Klammern (ARD) und kein Bild.

Habe den Tuner getauscht aber immer noch das gleiche; kein Bild, kein Ton und der Sendername in Klammern (ARD)

Was kann ich noch machen? Bin kein Elektroniker, daher schon etwas genauer beschreiben.

Meinen allerbesten Dank im voraus...

Gruß
Makel
tik-tak
Erleuchteter
Erleuchteter
Beiträge: 543
Registriert: Donnerstag 14. Dezember 2006, 09:23

Re: Dbox2 Philips kein Empfang

Beitrag von tik-tak »

13/18 Volt messen + 22kHz :gruebel:
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Hallo Tik-Tak,

kannst Du mir sagen wo ich da messen soll?

Gruß
Makel
doc
Contributor
Beiträge: 1623
Registriert: Donnerstag 10. Januar 2002, 20:03

Re: Dbox2 Philips kein Empfang

Beitrag von doc »

an der F-Buchse?
tik-tak
Erleuchteter
Erleuchteter
Beiträge: 543
Registriert: Donnerstag 14. Dezember 2006, 09:23

Re: Dbox2 Philips kein Empfang

Beitrag von tik-tak »

LNB-Eingang :gruebel:
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Hallo,

habe gemessen:

13,72 / 18,84 Volt :gruebel:
Danke & Gruß
Makel
tik-tak
Erleuchteter
Erleuchteter
Beiträge: 543
Registriert: Donnerstag 14. Dezember 2006, 09:23

Re: Dbox2 Philips kein Empfang

Beitrag von tik-tak »

Und 22kHz ???? :gruebel:
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Hallo,

wie/ womit kann ich das messen?
Hab ein Multimeter, geht das damit?
Habe die Durchschleifmethode getestet. Der zweite Reciever hat ein Bild.

Gruß
Makel
tik-tak
Erleuchteter
Erleuchteter
Beiträge: 543
Registriert: Donnerstag 14. Dezember 2006, 09:23

Re: Dbox2 Philips kein Empfang

Beitrag von tik-tak »

Frequenz wenn dein Multimeter es hat , geht auch mit Oscilloskope
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Hallo,

habe alles gemessen:

13/18 volt und 22 Khz alles vorhanden !!!

Habe ein neues Image aufgeflascht mit 2xIntel. Box gestartet und alles läuft hoch. Habe wieder kein Sender verfügbar. Das Bild ist dunkel und hat senkrechte Streifen. Dann bin ich zu den Menues gegangen. Bei U-Codes überprüfen schreibt die Box: AVIA 500 nicht gefunden, AVIA 600 gefunden .....

Hann das an den U-Codes liegen? Habe wohl 2 x Intel Flash auf dem Board.

Gruß
Marcel
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Sorry,

wenn es an den U-Codes liegt, wie und woher bekomme ich die??

Gruß
Marcel
tik-tak
Erleuchteter
Erleuchteter
Beiträge: 543
Registriert: Donnerstag 14. Dezember 2006, 09:23

Re: Dbox2 Philips kein Empfang

Beitrag von tik-tak »

google.de
:gruebel:
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Danke,

aberich find irgend wie keine. Gibt es eine genauere Angabe?

Danke
Gruß
Makel
MTM
Foren-Moderator
Beiträge: 944
Registriert: Freitag 21. Januar 2005, 16:18

Re: Dbox2 Philips kein Empfang

Beitrag von MTM »

Hallo,
wenn du eine Box mit Avia600 hast, brauchst du auch keinen ucode für ne 500er, und umgekehrt.

MfG,
MTM.
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Hallo,

ich komme einfach noch nocht weiter :dash: Hat noch einer eine Idee?

13/18 volt 22Khz alles da.

ucodes: AVIA500.ux ; AVIA600.ux; cam-alpha.bin; ucoe.bin

Gruß
Makel
tik-tak
Erleuchteter
Erleuchteter
Beiträge: 543
Registriert: Donnerstag 14. Dezember 2006, 09:23

Re: Dbox2 Philips kein Empfang

Beitrag von tik-tak »

Bootlog erstellen :gruebel:
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

BOOTP broadcast 2
BOOTP broadcast 3
jdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID http://Hallenberg.com
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> seteth
ethaddr 0x1001ffe3
ethaddr: 00:50:9c:2c:37:db
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.170.200, My IP 192.168.170.202
debug: Sending TFTP-request for file J/dboxifa_tmp/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 140008
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


U-Boot 1.1.6 (Tuxbox) (Jan 8 2007 - 22:58:00)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Philips, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.170.200; our IP address is 192.168.170.202
Filename 'J/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: * Using SCC ETHERNET device
TFTP from server 192.168.170.200; our IP address is 192.168.170.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: * ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.170.200; our IP address is 192.168.170.202
Filename 'J/dboxifa_tmp/tftpboot/u-boot'.
Load address: 0x100000
Loading: * Using SCC ETHERNET device
TFTP from server 192.168.170.200; our IP address is 192.168.170.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: * ####################################
done
Bytes transferred = 179877 (2bea5 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1 0

Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit

Size: 8192 kB in 71 Sectors
Sector Start Addresses:
10000000 (RO) 10004000 (RO) 10008000 (RO) 1000C000 (RO)
10010000 (RO) 10014000 (RO) 10018000 (RO) 1001C000 (RO)
10020000 (RO) 10040000 (RO) 10060000 (RO) 10080000 (RO)
100A0000 (RO) 100C0000 (RO) 100E0000 (RO) 10100000 (RO)
10120000 (RO) 10140000 (RO) 10160000 (RO) 10180000 (RO)
101A0000 (RO) 101C0000 (RO) 101E0000 (RO) 10200000 (RO)
10220000 (RO) 10240000 (RO) 10260000 (RO) 10280000 (RO)
102A0000 (RO) 102C0000 (RO) 102E0000 (RO) 10300000 (RO)
10320000 (RO) 10340000 (RO) 10360000 (RO) 10380000 (RO)
103A0000 (RO) 103C0000 (RO) 103E0000 (RO) 10400000 (RO)
10420000 (RO) 10440000 (RO) 10460000 (RO) 10480000 (RO)
104A0000 (RO) 104C0000 (RO) 104E0000 (RO) 10500000 (RO)
10520000 (RO) 10540000 (RO) 10560000 (RO) 10580000 (RO)
105A0000 (RO) 105C0000 (RO) 105E0000 (RO) 10600000 (RO)
10620000 (RO) 10640000 (RO) 10660000 (RO) 10680000 (RO)
106A0000 (RO) 106C0000 (RO) 106E0000 (RO) 10700000 (RO)
10720000 (RO) 10740000 (RO) 10760000 (RO) 10780000 (RO)
107A0000 (RO) 107C0000 (RO) 107E0000 (RO)
Using SCC ETHERNET device
TFTP from server 192.168.170.200; our IP address is 192.168.170.202
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: * #################################################################
#################################################################
##
done
Bytes transferred = 675073 (a4d01 hex)
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 675009 Bytes = 659.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting pid 11, console /dev/console: '/etc/init.d/rcS'


















dbox2 - ImageFlashingAssistent

- Hallenberg.com -









Sie koennen die dbox jetzt ausschalten.


Please press Enter to activate this console.
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: 3Com 3C920B-EMB-WNM Integrated Fast Ethernet Controller - Paketplaner-Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.170.200
IP-Adresse die die dbox bekommt: 192.168.170.202
Comport: Prolific USB-to-Serial Comm Port (COM4)
Betriebssystem: Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
CPU 1: Intel(R) Celeron(R) CPU 2.50GHz @ 2500 MHz
Dateiname des Images: Keywelt_V1_November_2x_SQUASHFS_2007.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 2.3
------ Powered by http://www.dboxservice-hallenberg.de ------
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Kann man damit was anfangen?
MTM
Foren-Moderator
Beiträge: 944
Registriert: Freitag 21. Januar 2005, 16:18

Re: Dbox2 Philips kein Empfang

Beitrag von MTM »

Hallo,
das ist ein Log vom Flashen. Und ausserdem von einem Image, was hier nicht erwünscht ist!!!

Also: legales Image flashen, uCodes einspielen, Bootlog erstellen.

MfG,
MTM.
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

wie erstelle ich denn eine Bootlog? Könnt ihr mir eine kurze Info geben?

Gruß
Makel
jmittelst
Tuxboxer
Tuxboxer
Beiträge: 6044
Registriert: Montag 17. November 2003, 06:48

Re: Dbox2 Philips kein Empfang

Beitrag von jmittelst »

http://wiki.tuxbox-cvs.sourceforge.net/wiki/Bootlog

Hmm... bei mir funktioniert die Suche im Wiki... und auch die hier im Forum...

cu
Jens
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Welches img nehme ich denn? Sportster?
MarcM
Foren-Moderator
Beiträge: 1119
Registriert: Sonntag 9. Juni 2002, 13:28

Re: Dbox2 Philips kein Empfang

Beitrag von MarcM »

Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Detected STB:
Vendor: Philips
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
cam: no firmware file found
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Thu Jan 1 01:00:00 CET 1970
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core.c: avia_av_firmware_read: Unable to load '/var/tuxbox/ucodes/avia60
0.ux'.
avia_av: microcode not found, setting up dummy
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_av_core: Starting avia_gt_wdt thread.
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: chkIVersion.cpp,v 1.15 2006/07/30 21:23:29 mogway Exp $
Yadi Intern vom 03.10.2006 22:12 - Image-Version 2.2.0.0
Networkcfg eth0: / gw ns
Startmode: Bootmenu - HWS: on
$Id: lcdip.cpp,v 1.5 2005/04/11 22:17:30 mogway Exp $
Starting pid 104, console /dev/console: '/etc/init.d/start'

Please press Enter to activate this console. Avia playback mode set to DualPES
[camd] CA_SEND_MSG: No such device
[camd] CA_SEND_MSG: No such device
/bin/enigma: /lib/libpng12.so.0: no version information available (required by /
bin/enigma)
[MOVIEPLAYER] Version 2.1 starting...
[ConfigFile] Unable to open file /var/tuxbox/config/enigma/chttpd.conf for readi
ng.
enigma, Copyright (C) dbox-Project
enigma comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome
to redistribute it under certain conditions.
It is licensed under the GNU General Public License,
Version 2

[eHotplug] created successfully
+ (0) Configuration
reached rl 0
+ (1) Background File Eraser
+ (1) EAUDIO
+ (5) d-Box LCD Hardware
[LCD] set brightness 130, contrast 29
+ (5) eActionMapList
+ (9) GFBDC
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread createted successfully
+ (15) SystemInfo
+ (20) skin subsystem
loading skin: /var/tuxbox/config/enigma/skins/default.esml
loading skin: /share/tuxbox/enigma/skins/default.esml
loading skin: /share/tuxbox/enigma/skins/stone_snr.esml
illegal color "" specified
[FONT] adding font /share/fonts/bluehigh.ttf...OK (Blue.Regular)
[FONT] adding font /share/fonts/bluebold.ttf...OK (Blue.Bold)
[FONT] adding font /share/fonts/pakenham.ttf...OK (lcd)
[FONT] adding font /share/fonts/md_khmurabi_10.ttf...OK (Replacement)
[FONT] adding font /share/fonts/unmrs.pfa...OK (Nimbus)
Font with name lcd already loaded, skip pakenham.ttf
fontalias eStatusBar does exist, skip make alias for font Nimbus
fontalias eChannelInfo does exist, skip make alias for font Nimbus
fontalias eWindow.TitleBar does exist, skip make alias for font Nimbus
fontalias eWindow.Childs does exist, skip make alias for font Nimbus
fontalias eListBox.EntryText.normal does exist, skip make alias for font Nimbus
fontalias eServiceSelector.Entry.Description does exist, skip make alias for fon
t Nimbus
fontalias eServiceSelector.singleColumn.Entry.Name does exist, skip make alias f
or font Nimbus
fontalias eEPGSelector.Entry.Description does exist, skip make alias for font Ni
mbus
fontalias eEPGSelector.Entry.DateTime does exist, skip make alias for font Nimbu
s
fontalias lcd.main.service_name does exist, skip make alias for font Nimbus
fontalias lcd.main.clock does exist, skip make alias for font Nimbus
fontalias lcd.menu.title does exist, skip make alias for font Nimbus
fontalias lcd.menu.element does exist, skip make alias for font Nimbus
fontalias eventview.description does exist, skip make alias for font Nimbus
fontalias eventview.date does exist, skip make alias for font Nimbus
fontalias eventview.time does exist, skip make alias for font Nimbus
fontalias eventview.channel does exist, skip make alias for font Nimbus
Image with name eCheckbox.checked already loaded, skip checked.png
Image with name eCheckbox.unchecked already loaded, skip unchecked.png
Image with name lcd_menu already loaded, skip lcdmenu.png
Image with name lcd_scart already loaded, skip video.png
Image with name mainmenu.background already loaded, skip mainmenu/background-fs8
.png
Image with name sselect_folder already loaded, skip folder-fs8.png
image/img="triaxlogo" - /enigma/pictures/triaxlogo-fs8.png: file not found
image/img="shortcut.escape" - /enigma/pictures/shortcut/escape.png: file not fou
nd
+ (25) eTextInputField
+ (25) RC Input layer
sh: cannot open /share/keymaps/eng.kmap: No such file
load keyboard mapping failed
+ (26) Console RC Driver
+ (26) input device driver
Input device "DBOX-2 FP IR" is not a keyboard.
Found 1 input devices!
+ (30) eSlider
+ (30) eStatusBar
+ (30) eWindow
+ (30) eWidget
+ (30) eProgress
+ (30) eLabel
+ (30) eCheckbox
+ (30) eButton
+ (30) eChannelInfo
+ (35) textedit field actions
+ (35) number actions
+ (35) cursor actions
+ (35) focus actions
+ (35) list actions
+ (35) shortcut actions
+ (35) enigma standby actions
+ (35) TransponderEditWindow Actions
+ (35) enigma helpwindow actions
+ (35) rotor menu actions
+ (35) enigma vcr actions
+ (35) timer view actions
+ (35) timer edit actions
+ (35) tuxtxt offset actions
+ (35) epg selector actions
+ (35) enigma mainmenu actions
+ (35) EPG Style Selector actions
+ (35) service selector actions
+ (35) enigma main actions
+ (35) enigma global actions
+ (35) enigma event view actions
+ (39) stream watchdog
+ (40) eDVB lib
1 lnbs readed
[eAVSwitch] loading scart-config (scart.conf)
[eAVSwitch] failed to parse scart-config (scart.conf), using default-values
[eAVSwitch] readed scart conf : 3 3 2 2 3 2
[eAVSwitch] readed dvb conf : 1 1 1 1 1 1
[eAVSwitch] setInput 0, avsfd=16
SET VSW: 0 1
SET VSW: 1 1
SET VSW: 2 1
eDVB::eDVB done.
+ (45) eServiceInterface
+ (46) eServiceFileHandler
+ (46) eServiceStructureHandler
+ (47) eServiceHandlerJPG
+ (47) eServicePlaylistHandler
+ (47) eServiceHandlerMP3
+ (47) eServiceHandlerDVB
+ (48) eDVBCAHandler
+ (48) EPG cache
[EPGC] Initialized EPGCache
+ (48) socket mmi handler
[eSocketMMIHandler] created successfully
+ (49) Timer Manager
loading playlist... /var/tuxbox/config/enigma/timer.epl
failed to open.
[eTimerManager] deepstandbywakeup is 0
[eTimerManager] now deepstandbywakeup is 0
FP_IOCTL_CLEAR_WAKEUP_TIMER okay
[eTimerManager] delKey deepstandbywakeup
reached rl 50
[ENIGMA] loading default keymaps...
[eDVB] do nfs/cifs/smbfs mounts
open /dev/dvb/card0/ancillary0 failed(No such file or directory)
open /dev/dvb/card0/ancillary0 failed(No such file or directory)
lcdMain created: 0x105d5680
[eZapMain]wasSleeping is 0, wasDeepStandby is 0
avia_av: new_audio_config timeout
avia_av: new_audio_config timeout
no sapi
loading playlist... /hdd/movie/recordings.epl
failed to open.
loading playlist... /var/tuxbox/config/enigma/playlist.epl
failed to open.
loading playlist... /var/tuxbox/config/enigma/userbouquets.tv.epl
failed to open.
loading playlist... /var/tuxbox/config/enigma/userbouquets.file.epl
failed to open.
loading playlist... /var/tuxbox/config/enigma/userbouquets.radio.epl
failed to open.
loading playlist... /var/tuxbox/config/enigma/userbouquet.b7624.tv
failed to open.
destroy /var/tuxbox/config/enigma/userbouquet.b7624.tv
loading playlist... /var/tuxbox/config/enigma/userbouquet.b7624.tv
loading playlist... /var/tuxbox/config/enigma/userbouquet.b7624.tv
loading playlist... /var/tuxbox/config/enigma/userbouquet.a320.radio
failed to open.
destroy /var/tuxbox/config/enigma/userbouquet.a320.radio
loading playlist... /var/tuxbox/config/enigma/userbouquet.a320.radio
loading playlist... /var/tuxbox/config/enigma/userbouquet.a320.radio
loading playlist... /var/tuxbox/config/enigma/userbouquet.5221c.file
failed to open.
destroy /var/tuxbox/config/enigma/userbouquet.5221c.file
loading playlist... /var/tuxbox/config/enigma/userbouquet.5221c.file
loading playlist... /var/tuxbox/config/enigma/userbouquet.5221c.file
createService failed!
removeRef on non-existing service!
------------> changed! 0
no transponder 1 44d
[TUNE] tune failed
avia_av: new_audio_config timeout
avia_av: new_audio_config timeout
avia_av: new_audio_config timeout
[ENIGMA_DYN] lockWebIf = 1
[ENIGMA] starting httpd
[NET] httpd server started on port 80
console=ttyS0 detected...disable enigma serial http interface
[ConfigFile] Unable to open file /var/tuxbox/config/enigma/mount.conf for readin
g.
[ENIGMA_MOUNT] automountMountPoints...
[ENIGMA] ok, beginning mainloop
+ (54) wizard: tv system
+ (55) wizard: language
+ (56) wizard: fpudate
+ (57) wizard: timezone
Dont run Timezone Setup.. timezone is already selected
waitpid: No child processes
+ (58) wizard: scan
reached rl 75
[FONT] creating new font color cache entry ff000000 .. 00ffffff
[FONT] creating new font color cache entry 33294a6b .. 00ffffff
[FONT] creating new font color cache entry 00101258 .. 00ffffff
[FONT] creating new font color cache entry 00c00000 .. 00ffffff
[FONT] creating new font color cache entry 0000c000 .. 00ffffff
[FONT] creating new font color cache entry 00c0c000 .. 00ffffff
[FONT] creating new font color cache entry 000000c0 .. 00ffffff
[FONT] creating new font color cache entry 225b7395 .. 00ffffff
createService failed!
removeRef on non-existing service!
Section timeout PID 0012
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Habe die Box nicht am LNB angeschlossen. Bootlog im abgeklemmten Zustand gemacht.