Dbox2 Philips kein Empfang

Boxenweitwurf
MarcM
Foren-Moderator
Beiträge: 1119
Registriert: Sonntag 9. Juni 2002, 13:28

Re: Dbox2 Philips kein Empfang

Beitrag von MarcM »

$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
cam: no firmware file found
.
avia_av_core.c: avia_av_firmware_read: Unable to load '/var/tuxbox/ucodes/avia600.ux'.
.
avia_av: microcode not found, setting up dummy
Spiel mal ucodes ein und mach dann nochmal ein Bootlog an angeschlossener Antenne....

Marc
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

[FE] no transponder .. ignore FE Events
[FE] no transponder .. ignore FE Events
[FE] no transponder .. ignore FE Events
[FE] no transponder .. ignore FE Events
[FE] no transponder .. ignore FE Events
[FE] no transponder .. ignore FE Events
[FE] no trbdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-42.0d.02.08.00.00-e8
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.170.201, My IP 192.168.170.200
debug: Sending TFTP-request for file C/Programme/Dbox2 Bootmanager/ppcboot_write
flash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2c-37-db
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.170.201; our IP address is 192.168.170.200
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.170.201; our IP address is 192.168.170.200
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.170.201; our IP address is 192.168.170.200
Filename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 2
TFTP from server 192.168.170.201; our IP address is 192.168.170.200
Filename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 3
TFTP from server 192.168.170.201; our IP address is 192.168.170.200
Filename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-42.0d.02.08.00.00-e8
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.170.201, My IP 192.168.170.200
debug: Sending TFTP-request for file C/Programme/Dbox2 Bootmanager/ppcboot_write
flash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2c-37-db
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.170.201; our IP address is 192.168.170.200
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.170.201; our IP address is 192.168.170.200
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.170.201; our IP address is 192.168.170.200
Filename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 2
TFTP from server 192.168.170.201; our IP address is 192.168.170.200
Filename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T
MarcM
Foren-Moderator
Beiträge: 1119
Registriert: Sonntag 9. Juni 2002, 13:28

Re: Dbox2 Philips kein Empfang

Beitrag von MarcM »

debug: Got BOOTP reply from Server IP 192.168.170.201, My IP 192.168.170.200
debug: Sending TFTP-request for file C/Programme/Dbox2 Bootmanager/ppcboot_writeflash
jetzt versuchst du ein Image zu flashen......??? :-?
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

mit dem Bootmanager oder Flaschasistent?
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

welches Image, ist das egal?
tik-tak
Erleuchteter
Erleuchteter
Beiträge: 543
Registriert: Donnerstag 14. Dezember 2006, 09:23

Re: Dbox2 Philips kein Empfang

Beitrag von tik-tak »

Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Jetzt sieht es so aus:

ndebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-42.0d.02.08.00.00-e8
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 163020
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (Jul 3 2008 - 07:24:31)

CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Philips, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
env: found "console"
env: found "baudrate"
env: found "dbox_duplex"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670259 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670195 Bytes = 654.5 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
MarcM
Foren-Moderator
Beiträge: 1119
Registriert: Sonntag 9. Juni 2002, 13:28

Re: Dbox2 Philips kein Empfang

Beitrag von MarcM »

oooohhhh man...........................

bitte nimm das Yadi Image von oben und flash es auf die Box, spiel die ucodes ein, mach nen Sendersuchlauf und dann guck ob sie Sender reinbekommt......und wenn nicht mach bitte dann ein bootlog von der Box wenn sie an der Schüssel hängt.....

Marc
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Hallo,

Yardi geflascht ucodes eingespielt: avia500.ux; avia600.ux; cam-alpha; ucode; habe ich aus dem Netz aus dem Netz


zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30620k available (1316k kernel code, 372k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2c:37:db
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Detected STB:
Vendor: Philips
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Thu Jan 1 01:00:00 CET 1970
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_av_core: Starting avia_gt_wdt thread.
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: chkIVersion.cpp,v 1.15 2006/07/30 21:23:29 mogway Exp $
Yadi Intern vom 03.10.2006 22:12 - Image-Version 2.2.0.0
Networkcfg eth0: 192.168.170.4/255.255.255.0 gw 192.168.170.1 ns 192.168.170.1
Startmode: Bootmenu - HWS: on
Starting pid 106, console /dev/console: '/etc/init.d/start'

Please press Enter to activate this console. Avia playback mode set to DualPES
[camd] ca system id: 1702
/bin/enigma: /lib/libpng12.so.0: no version information available (required by /
bin/enigma)
[camd] no card is in slot #2
[camd] no card is in slot #1
[MOVIEPLAYER] Version 2.1 starting...
enigma, Copyright (C) dbox-Project
enigma comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome
to redistribute it under certain conditions.
It is licensed under the GNU General Public License,
Version 2

[eHotplug] created successfully
+ (0) Configuration
reached rl 0
+ (1) Background File Eraser
+ (1) EAUDIO
+ (5) d-Box LCD Hardware
[LCD] set brightness 130, contrast 29
+ (5) eActionMapList
+ (9) GFBDC
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread createted successfully
+ (15) SystemInfo
+ (20) skin subsystem
loading skin: /var/tuxbox/config/enigma/skins/default.esml
loading skin: /share/tuxbox/enigma/skins/default.esml
loading skin: /share/tuxbox/enigma/skins/stone_snr.esml
illegal color "" specified
[FONT] adding font /share/fonts/bluehigh.ttf...OK (Blue.Regular)
[FONT] adding font /share/fonts/bluebold.ttf...OK (Blue.Bold)
[FONT] adding font /share/fonts/pakenham.ttf...OK (lcd)
[FONT] adding font /share/fonts/md_khmurabi_10.ttf...OK (Replacement)
[FONT] adding font /share/fonts/unmrs.pfa...OK (Nimbus)
Font with name lcd already loaded, skip pakenham.ttf
fontalias eStatusBar does exist, skip make alias for font Nimbus
fontalias eChannelInfo does exist, skip make alias for font Nimbus
fontalias eWindow.TitleBar does exist, skip make alias for font Nimbus
fontalias eWindow.Childs does exist, skip make alias for font Nimbus
fontalias eListBox.EntryText.normal does exist, skip make alias for font Nimbus
fontalias eServiceSelector.Entry.Description does exist, skip make alias for fon
t Nimbus
fontalias eServiceSelector.singleColumn.Entry.Name does exist, skip make alias f
or font Nimbus
fontalias eEPGSelector.Entry.Description does exist, skip make alias for font Ni
mbus
fontalias eEPGSelector.Entry.DateTime does exist, skip make alias for font Nimbu
s
fontalias lcd.main.service_name does exist, skip make alias for font Nimbus
fontalias lcd.main.clock does exist, skip make alias for font Nimbus
fontalias lcd.menu.title does exist, skip make alias for font Nimbus
fontalias lcd.menu.element does exist, skip make alias for font Nimbus
fontalias eventview.description does exist, skip make alias for font Nimbus
fontalias eventview.date does exist, skip make alias for font Nimbus
fontalias eventview.time does exist, skip make alias for font Nimbus
fontalias eventview.channel does exist, skip make alias for font Nimbus
Image with name eCheckbox.checked already loaded, skip checked.png
Image with name eCheckbox.unchecked already loaded, skip unchecked.png
Image with name lcd_menu already loaded, skip lcdmenu.png
Image with name lcd_scart already loaded, skip video.png
Image with name mainmenu.background already loaded, skip mainmenu/background-fs8
.png
Image with name sselect_folder already loaded, skip folder-fs8.png
image/img="triaxlogo" - /enigma/pictures/triaxlogo-fs8.png: file not found
image/img="shortcut.escape" - /enigma/pictures/shortcut/escape.png: file not fou
nd
+ (25) eTextInputField
+ (25) RC Input layer
sh: cannot open /share/keymaps/eng.kmap: No such file
load keyboard mapping failed
+ (26) Console RC Driver
+ (26) input device driver
Input device "DBOX-2 FP IR" is not a keyboard.
Found 1 input devices!
+ (30) eSlider
+ (30) eStatusBar
+ (30) eWindow
+ (30) eWidget
+ (30) eProgress
+ (30) eLabel
+ (30) eCheckbox
+ (30) eButton
+ (30) eChannelInfo
+ (35) textedit field actions
+ (35) number actions
+ (35) cursor actions
+ (35) focus actions
+ (35) list actions
+ (35) shortcut actions
+ (35) enigma standby actions
+ (35) TransponderEditWindow Actions
+ (35) enigma helpwindow actions
+ (35) rotor menu actions
+ (35) enigma vcr actions
+ (35) timer view actions
+ (35) timer edit actions
+ (35) tuxtxt offset actions
+ (35) epg selector actions
+ (35) enigma mainmenu actions
+ (35) EPG Style Selector actions
+ (35) service selector actions
+ (35) enigma main actions
+ (35) enigma global actions
+ (35) enigma event view actions
+ (39) stream watchdog
+ (40) eDVB lib
1 lnbs readed
reading services
loaded 0 services
[eAVSwitch] loading scart-config (scart.conf)
[eAVSwitch] failed to parse scart-config (scart.conf), using default-values
[eAVSwitch] readed scart conf : 3 3 2 2 3 2
[eAVSwitch] readed dvb conf : 1 1 1 1 1 1
[eAVSwitch] setInput 0, avsfd=16
SET VSW: 0 1
SET VSW: 1 1
SET VSW: 2 1
eDVB::eDVB done.
+ (45) eServiceInterface
+ (46) eServiceFileHandler
+ (46) eServiceStructureHandler
+ (47) eServiceHandlerJPG
+ (47) eServicePlaylistHandler
+ (47) eServiceHandlerMP3
+ (47) eServiceHandlerDVB
+ (48) eDVBCAHandler
+ (48) EPG cache
[EPGC] Initialized EPGCache
+ (48) socket mmi handler
[eSocketMMIHandler] created successfully
+ (49) Timer Manager
loading playlist... /var/tuxbox/config/enigma/timer.epl
failed to open.
[eTimerManager] deepstandbywakeup is 0
[eTimerManager] now deepstandbywakeup is 0
FP_IOCTL_CLEAR_WAKEUP_TIMER okay
[eTimerManager] delKey deepstandbywakeup
reached rl 50
[ENIGMA] loading default keymaps...
[eDVB] do nfs/cifs/smbfs mounts
open /dev/dvb/card0/ancillary0 failed(No such file or directory)
open /dev/dvb/card0/ancillary0 failed(No such file or directory)
lcdMain created: 0x105d5ac0
[eZapMain]wasSleeping is 0, wasDeepStandby is 0
no sapi
loading playlist... /hdd/movie/recordings.epl
failed to open.
loading playlist... /var/tuxbox/config/enigma/playlist.epl
failed to open.
loading playlist... /var/tuxbox/config/enigma/userbouquets.tv.epl
loading playlist... /var/tuxbox/config/enigma/userbouquets.file.epl
loading playlist... /var/tuxbox/config/enigma/userbouquets.radio.epl
loading playlist... /var/tuxbox/config/enigma/userbouquet.53584.tv
loading playlist... /var/tuxbox/config/enigma/userbouquet.9a44a.radio
loading playlist... /var/tuxbox/config/enigma/userbouquet.e2ef9.file
createService failed!
removeRef on non-existing service!
------------> changed! 0
no transponder 1 44d
[TUNE] tune failed
[ENIGMA_DYN] lockWebIf = 1
[ENIGMA] starting httpd
[NET] httpd server started on port 80
console=ttyS0 detected...disable enigma serial http interface
[ConfigFile] Unable to open file /var/tuxbox/config/enigma/mount.conf for readin
g.
[ENIGMA_MOUNT] automountMountPoints...
[ENIGMA] ok, beginning mainloop
+ (54) wizard: tv system
+ (55) wizard: language
+ (56) wizard: fpudate
+ (57) wizard: timezone
Dont run Timezone Setup.. timezone is already selected
waitpid: No child processes
+ (58) wizard: scan
reached rl 75
[FONT] creating new font color cache entry ff000000 .. 00ffffff
[FONT] creating new font color cache entry 33294a6b .. 00ffffff
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Kann man sehen ob die ucodes richtig sind?
Habe sie wie beschrieben aus dem Netz. (Für Philips Sat.Box)
MarcM
Foren-Moderator
Beiträge: 1119
Registriert: Sonntag 9. Juni 2002, 13:28

Re: Dbox2 Philips kein Empfang

Beitrag von MarcM »

ja, scheinen zu passen.....
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Finde aber keine Sender! Satfind ist OK!

Box findet 1 oder 2 Transponder aber keine Sender????? :gruebel:
MarcM
Foren-Moderator
Beiträge: 1119
Registriert: Sonntag 9. Juni 2002, 13:28

Re: Dbox2 Philips kein Empfang

Beitrag von MarcM »

Ich bin jetzt nicht so der Enigma-Bootlog-Versteher, auf den ersten Blick sieht das aber OK aus.....Wie kann den SATFIND OK sein wenn du keinen Sender reinbekommst ? Was zeigt denn SATFIND an ?

Und der SAT-Anschluß ist OK ? Anderen Receiver getestet ?

Marc
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Also wenn ich die Box hochfahre und anschließend ins Menue SATFIND gehe dann ist erst alles auf Null.

SNR:0
AGC:0
BER:0
SATELIT: ASTRA 19,2E
Transponder: 0861/22000/H

Das Feld Transponder ist unterlegt, so das man es mit OK anklicken kann.
Wenn ich das mache dann ändert sich die Werte:

SNR:87%
AGC:45%
BER:25
SATELIT: ASTRA 19,2E
Transponder: 0861/22000/H oder aber auch V

An dem Kabel laufen all meine Reciever: Noname(Digital); Nokia DBOX2; Dreambox DM7000

:gruebel: WER WEIß NOCH RAT?????? :gruebel:

Gruß
Makel
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Hat keiner mehr einen Rat (Lösung ) für mich ????????? :gruebel:
Makel
Interessierter
Interessierter
Beiträge: 25
Registriert: Samstag 28. Juni 2008, 17:37

Re: Dbox2 Philips kein Empfang

Beitrag von Makel »

Hallo,

was ich irretiert ist das:

BER nicht Null ist, das ist bei meinen anderen Boxen wohl der Fall.

und:

nach Sendersuchlauf:
2 Transponder gefunden aber keine Sender

Gruß
Makel