dbox2 kein Netzwerk

Anlaufschwierigkeiten? Was ist was? Worum geht's?
columbusxy
Neugieriger
Neugieriger
Beiträge: 6
Registriert: Mittwoch 3. September 2008, 14:39

dbox2 kein Netzwerk

Beitrag von columbusxy »

Erstmal Guten Tag!

Bin dbox Neuling (pens. Techniker)

Habe eine Sagem dbox2 1x mit Linux drauf.
Beim blöd herumspielen und Flashversuchen habe ich es irgend wie zusammengebracht, dass die Box zwar bootet aber
die Meldung: "ucodes fehlen-per FTP oder Boot Manager einlesen und Box neu starten".
Wäre nicht schlimm da ich die ucodes am PC gesichert habe.
ABER das Netzwerk auf der Box wird nicht gestartet und daher kann ich die codes nicht einlesen.
Im Box Hauptmenü / Einstellungen / Netzwerk--kann ich zwar die Einstellungen Testen und Verändern aber
bei "Aktive Netzwerkeinstellungen zeigen"-- Meldung : Netzwerk inactive!!
Die IP Adressen und die serielle mit Nullmodemkabel sind korrekt.
Bitte um Hilfe.
DANKE :dash:
Tommy
Tuxboxer
Tuxboxer
Beiträge: 4332
Registriert: Dienstag 7. Mai 2002, 17:04

Re: dbox2 kein Netzwerk

Beitrag von Tommy »

Na denn - FAQ lesen, Nullmodemkabel besorgen, Bootlog machen und hier posten (in der Reihenfolge) Ohne Bootlog kann man schlecht beurteilen was da schief geht.

Achso - die Box versteht nur 10half
columbusxy
Neugieriger
Neugieriger
Beiträge: 6
Registriert: Mittwoch 3. September 2008, 14:39

Re: dbox2 kein Netzwerk

Beitrag von columbusxy »

DANKE und Hallo!
Anbei das logfile

jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080008: 0x7df9 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008000c: 0xeed1 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080010: 0x8bbc in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080014: 0xf245 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080018: 0x51be in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008001c: 0x704d in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080020: 0x9240 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080024: 0x2aff in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0000: 0x030e in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0004: 0xccf4 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0008: 0xc612 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a000c: 0xa45a in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0010: 0x032f in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0014: 0xdf44 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0018: 0xae78 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a001c: 0x9331 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0020: 0x7e3b in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0024: 0xe859 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0000: 0xe8d9 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0004: 0x99d0 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0008: 0x32d5 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c000c: 0x5312 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0010: 0x3830 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0014: 0xa98c in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0018: 0x4f19 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c001c: 0x8620 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0020: 0x7b9f in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0024: 0x12c9 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0000: 0x64f2 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0004: 0xb0d3 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0008: 0xfa8e in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e000c: 0x6881 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0010: 0x25e8 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0014: 0x9a03 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0018: 0x9704 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e001c: 0xfbcd in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0020: 0x152c in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0024: 0xccc9 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100000: 0x473c in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100004: 0xc581 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100008: 0xfcc5 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010000c: 0x4625 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100010: 0x1c2f in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100014: 0x42e0 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100018: 0xe504 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010001c: 0xf4ba in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100020: 0xba36 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100024: 0x5166 in
stead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x00112848
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120000: 0x4216 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120004: 0x176d in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120008: 0x4dc9 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012000c: 0x0a77 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120010: 0xd1bb in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120014: 0x8114 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120018: 0x7016 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012001c: 0x969c in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120020: 0xe1b6 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120024: 0xefb3 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140000: 0x517e in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140004: 0xa887 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140008: 0x8db6 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014000c: 0x0482 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140010: 0xf13b in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140014: 0x1066 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140018: 0xcbf9 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014001c: 0x88ae in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140020: 0x2bce in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140024: 0xefaa in
stead
Further such events for this erase block will not be printed
Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
empty_blocks 0, bad_blocks 0, c->nr_blocks 11
mount: mounting /dev/mtdblock/3 on /var failed: Invalid argument
Update altes Baseimage...
touch: /var/etc/.v2.3.0: No such file or directory
Subversion updated to v2.3.0...
Starting the automounter
mkdir: cannot create directory '/var/lock': Read-only file system
ifup: can't open '/etc/network/interfaces': No such file or directevent: $Id: ev
ent.c,v 1.12 2003/09/30 05:45:38 obi Exp $
ory
tuxbox: no ide if detected
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
cam: no firmware file found
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core.c: avia_av_firmware_read: Unable to load '/var/tuxbox/ucodes/avia60
0.ux'.
avia_av: microcode not found, setting up dummy
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_av_core: Starting avia_gt_wdt thread.
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1993
DVB: registering frontend 0:0 (VES1993)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Thu Jan 1 12:00:00 CET 1970
$Id: sectionsd.cpp,v 1.262 2008/05/12 11:06:37 seife Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/neutrino.conf for reading.
[sectionsd] /var/tuxbox/config/neutrino.conf not found
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
$Id: zapit.cpp,v 1.410 2008/04/25 21:23:23 houdini Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading
.
[frontend] uncommitted_switch_mode 0
/share/tuxbox/satellites.xml: No such file or directory
[getservices] satellites.xml
/var/tuxbox/config/zapit/services.xml: No such file or directory
[camd] CA_SEND_MSG: No such device
[camd] CA_SEND_MSG: No such device
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $

[ConfigFile] Unable to open file avia_av: new_audio_config timeout
/var/tuxbox/config/controld.conf for reading.
[controld] /var/tuxbox/config/controld.conf not found
[controld] Boxtype detected: (3, Sagem D-BOX2)
[controld]: Could not open configuration file scart.conf, using defaults
[controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1
[controld] format: 4:3(LB)
avia_av: new_audio_config timeout
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[ConfigFile] Unable to open file /var/tuxbox/config/nhttpd.conf for reading.
[ConfigFile] Unable to open file /var/tuxbox/config/nhttpd.conf for writing.
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by
/bin/neutrino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[ConfigFile] Unable to open file /var/tuxbox/config/neutrino.conf for reading.
[ConfigFile] Unable to open file /var/tuxbox/config/scan.conf for reading.
[neutrino] Loading of scan settings failed. Using defaults.
cannot read locale: No such file or directory
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
/share/tuxbox/satellites.xml: No such file or directory
[CBasicClient] receive failed: /tmp/zapit.sock
[neutrino] received 0 sats
[neutrino] registering as event client
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[sectionsd] getUTC: read: Connection timed out
testNw IP:
testNw MAC-addressnot found
testNw Netmask:
testNw Broadcast:
testNw Gateway:
testNw Nameserver:
testNw Testsite www.jackthegrabber.de
[sectionsd] getUTC: read: Connection timed out
ifdown: can't open '/etc/network/interfaces': No such file or directory
ifup: can't open '/etc/network/interfaces': No such file or directory
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[neutrino] unable to write file /var/tuxbox/boot/boot.conf
[ConfigFile] Unable to open file /var/tuxbox/config/scan.conf for writing.
[ConfigFile] Unable to open file /var/tuxbox/config/neutrino.conf for writing.
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out

mfg. columbusxy
Liontamer
Klöppelliese
Beiträge: 1644
Registriert: Donnerstag 8. August 2002, 12:51

Re: dbox2 kein Netzwerk

Beitrag von Liontamer »

Wie es aussieht, ist das image beschädigt. Flashen eines neuen Images sollte die Probleme beheben.
columbusxy
Neugieriger
Neugieriger
Beiträge: 6
Registriert: Mittwoch 3. September 2008, 14:39

Re: dbox2 kein Netzwerk

Beitrag von columbusxy »

Hallo
DANKE

OK das ist mir schon klar aber flashen ohne Netzwerk Verbindung???

mfg.
Tommy
Tuxboxer
Tuxboxer
Beiträge: 4332
Registriert: Dienstag 7. Mai 2002, 17:04

Re: dbox2 kein Netzwerk

Beitrag von Tommy »

Code: Alles auswählen

ifup: can't open '/etc/network/interfaces': No such file or directevent: $Id: ev
kann man die nicht im Tuxcom anlegen?
columbusxy
Neugieriger
Neugieriger
Beiträge: 6
Registriert: Mittwoch 3. September 2008, 14:39

Re: dbox2 kein Netzwerk

Beitrag von columbusxy »

:gruebel: das hoffe ich auch aber dazu bin ich leider (noch) zu wenig beschlagen
Tommy
Tuxboxer
Tuxboxer
Beiträge: 4332
Registriert: Dienstag 7. Mai 2002, 17:04

Re: dbox2 kein Netzwerk

Beitrag von Tommy »

Der Tuxcom liegt unter der blauen Taste "Tuxbox Commander" und ist vergleichbar mit dem Midnight Commander aus der Linuxwelt. Bin gerade nicht an der Box - vllt. kann jemand mal den inhalt der interfaces posten.
Liontamer
Klöppelliese
Beiträge: 1644
Registriert: Donnerstag 8. August 2002, 12:51

Re: dbox2 kein Netzwerk

Beitrag von Liontamer »

Wenn du mit dem Flash-Assistenten von Hallenberg flasht, ist es egal ob das Netzwerk unter Linux funktioniert oder nicht.
Wie vorzugehen ist, steht im Wiki.

PS: Wild irgendwelche Dateien anzulegen bringt garnichts, wenn die Verzeichnisstruktur im Flash bereits weigehend zerstört ist...
columbusxy
Neugieriger
Neugieriger
Beiträge: 6
Registriert: Mittwoch 3. September 2008, 14:39

Re: dbox2 kein Netzwerk

Beitrag von columbusxy »

Vielen Dank für eure Unterstützung!

Im Wiki finde ich nur " ohne Netzwerk kein flashen".
Den Hallenberg Manager habe ich zur Verfügung aber der braucht auch eine funktionierende Ethernet Verbindung-oder?
Und diese in der Box würde ich gerne wieder zum Laufen bringen.
Verzeiht enem Oldie die Unwissenheit aber bei der dbox bin ich absoluter Anfänger.
Aber sehr interessiert.
lg.
MarcM
Foren-Moderator
Beiträge: 1119
Registriert: Sonntag 9. Juni 2002, 13:28

Re: dbox2 kein Netzwerk

Beitrag von MarcM »

in diesem Falle ist eher die Netzwerkkarte im PC gemeint......Netzwerkkarte funktioniert, feste IP vergeben, firewall aus, etc....also quasi bereit zum flashen

Zum flashen wenn noch nix (oder eben ein defektes Betriebssystem) auf der Box ist kann es ja keine Netzwerkverbindung geben....

geh nach dieser Anleitung vor http://wiki.tuxbox-cvs.sourceforge.net/ ... gassistent

Wenn was nicht damit hinhaut poste die Fehlermeldung.....

Marc
columbusxy
Neugieriger
Neugieriger
Beiträge: 6
Registriert: Mittwoch 3. September 2008, 14:39

Re: dbox2 kein Netzwerk

Beitrag von columbusxy »

:D SUPER!!!

Wieder alles im grünen Bereich!

Ihr seid wirkliche Profis.

Nochmals herzlichen Dank für die kompetente Hilfe.

lg.R.