ich habe mir aus dem CVS ein 2.6er Image gebaut. Leider hängt sich die Box nach dem Einschalten nun immer auf. Führe ich danach ein Reset (Pfeil-/Power-Taste) durch, bootet die Box ganz normal und funktioniert ohne Probleme. Wird sie allerdings komplett ausgeschaltet, hängt sie sich beim nächsten Boot konsequent wieder auf.
Hier mal ein Bootlog mit "Aufhänger":
Code: Alles auswählen
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 163280
verify sig: 262
Branching to 0x40000
U-Boot 1.2.0 (Tuxbox) (Sep 29 2008 - 23:05:45)
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ... done.
env: found "console"
env: found "baudrate"
env: found "dbox_duplex"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: console on ttyCPM0 (2.6)
2: console on fb0
3: console on ttyS0 (2.4)
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 985526 bytes loaded to 0x200000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00200000 ...
Image Name: Linux-2.6.26.4-dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 985462 Bytes = 962.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
[ 0.000000] Linux version 2.6.26.4-dbox2 (dbox@vm-dbox) (gcc version 3.4.6) #
2 PREEMPT Mon Sep 29 23:06:19 CEST 2008
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 8192
[ 0.000000] Normal 8192 -> 8192
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 8192
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 8128
[ 0.000000] Kernel command line: console=ttyS0,9600 dbox_duplex=0 root=/dev/m
tdblock2 rootfstype=squashfs
[ 0.000000] PID hash table entries: 128 (order: 7, 512 bytes)
[ 0.000000] Decrementer Frequency = 252000000/60
[ 0.000000] m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
[ 0.000000] m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
[ 10.919067] Console: colour dummy device 80x25
[ 10.919228] cpm_uart: console: compat mode
[ 10.919470] console [ttyCPM0] enabled
[ 11.957442] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 12.036271] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 12.126820] Memory: 30256k available (1624k kernel code, 492k data, 68k init,
0k highmem)
[ 12.440677] Mount-cache hash table entries: 512
[ 12.509639] net_namespace: 192 bytes
[ 12.550953] NET: Registered protocol family 16
[ 12.700564] NET: Registered protocol family 2
[ 12.849430] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 12.930137] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 13.011701] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 13.087496] TCP: Hash tables configured (established 1024 bind 1024)
[ 13.163303] TCP reno registered
[ 13.229603] NET: Registered protocol family 1
[ 13.279386] dbox2: Nokia board detected.
[ 13.346157] squashfs: version 3.0 (2006/03/15) / LZMA enabled Phillip Lougher
[ 13.428899] JFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc.
[ 13.503659] io scheduler noop registered
[ 13.547103] io scheduler deadline registered (default)
[ 13.639887] Serial: CPM driver $Revision: 0.02 $
[ 13.692406] cpm_uart: WARNING: no UART devices found on platform bus!
[ 13.768976] cpm_uart: the driver will guess configuration, but this mode is n
o longer supported.
[ 13.874368] ttyCPM0 at MMIO 0xff000a80 (irq = 20) is a CPM UART
[ 13.946917] ttyCPM1 at MMIO 0xff000a90 (irq = 19) is a CPM UART
[ 14.053866] loop: module loaded
[ 14.088852] Linux video capture interface: v2.00
[ 14.147560] D-Box 2 flash driver (size->0x800000 mem->0x10000000)
[ 14.220720] D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
[ 14.300760] Intel/Sharp Extended Query Table at 0x0035
[ 14.362960] Using auto-unlock on power-up/resume
[ 14.418019] cfi_cmdset_0001: Erase suspend on write enabled
[ 14.485238] Creating 6 MTD partitions on "D-Box 2 flash memory":
[ 14.556584] 0x00000000-0x00020000 : "BR bootloader"
[ 14.624155] 0x00020000-0x00040000 : "FLFS (U-Boot)"
[ 14.688426] 0x00040000-0x005a0000 : "root (squashfs+lzma)"
[ 14.761707] 0x005a0000-0x00800000 : "var (JFFS2)"
[ 14.824366] 0x00020000-0x00800000 : "Flash without bootloader"
[ 14.902655] 0x00000000-0x00800000 : "Complete Flash"
[ 14.970870] mice: PS/2 mouse device common for all mice
[ 15.034469] half-duplex mode enabled
[ 15.078615] eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:42:18:48
[ 15.148222] TCP cubic registered
[ 15.186846] NET: Registered protocol family 17
[ 15.268600] VFS: Mounted root (squashfs filesystem) readonly.
[ 15.386321] Freeing unused kernel memory: 68k it
init started: BusyBox v1.7.2 (2008-10-04 14:29:11 CEST)
starting pid 124, tty '': '/etc/init.d/rcS'
/bin/makedevices
Detected STB:
Vendor: Nokia
Model: D-BOX2
[ 26.352868] [i2c-8xx]: mpc 8xx i2c init
[ 26.421735] [i2c-8xx]: adapter: 0
[ 27.157735] event: $Id: event.c,v 1.12.4.3 2007/10/09 01:04:05 carjay Exp $
[ 27.984939] lcd: init lcd driver module
[ 28.052669] lcd: found KS0713/SED153X lcd interface
[ 28.478782] input: DBOX-2 FP IR as /devices/virtual/input/input0
[ 29.442706] $Id: cam.c,v 1.30.2.6 2007/10/09 01:03:38 carjay Exp $
[ 29.513536] firmware: requesting cam-alpha.bin
[ 30.808387] avia_av: $Id: avia_av_core.c,v 1.98.2.13 2008/06/14 19:04:46 seif
e Exp $
[ 30.898180] firmware: requesting avia500.ux
[ 31.549091] avia_av_core: decoder watchdog thread started.
[ 31.611881] avia_av_event: $Id: avia_av_event.c,v 1.11.4.1 2005/01/21 21:23:3
8 carjay Exp $
[ 31.840822] avia_av_proc: $Id: avia_av_proc.c,v 1.14.2.5 2008/09/19 22:43:42
seife Exp $
[ 32.676815] avia_gt_core: $Id: avia_gt_core.c,v 1.48.2.6 2007/10/09 01:03:38
carjay Exp $
[ 32.772468] avia_gt_core: autodetecting chip type... GTX
[ 32.835787] avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Ex
p $
[ 33.177317] avia_gt_accel: $Id: avia_gt_accel.c,v 1.19.4.1 2007/10/09 01:03:3
8 carjay Exp $
[ 33.274732] avia_gt_core: masking unhandled irq reg 1 bit 11
[ 33.342099] avia_gt_core: masking unhandled irq reg 1 bit 13
[ 33.410047] avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210.2.8 2008/06/16 10:15:00 s
eife Exp $
[ 33.505677] firmware: requesting ucode.bin
[ 33.599900] avia_gt_ucode: loaded ucode vB107
[ 33.661166] avia_gt_ucode: ucode section filters disabled.
[ 33.725132] avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536)
, aligning...
[ 33.822996] avia_gt_core: masking unhandled irq reg 0 bit 6
[ 33.890048] avia_gt_gv: $Id: avia_gt_gv.c,v 1.39.2.5 2007/10/09 01:03:38 carj
ay Exp $
[ 33.983729] avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen E
xp $
[ 34.072660] avia_gt_pcm_set_rate(44100)
[ 34.118173] avia_gt_capture: $Id: avia_gt_capture.c,v 1.32.4.5 2007/10/09 01:
03:38 carjay Exp $
[ 34.222639] avia_gt_pig: $Id: avia_gt_pig.c,v 1.40.4.3 2007/10/09 01:03:38 ca
rjay Exp $
[ 34.318555] avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26.4.1 2007/10/09 01:03:39 ca
rjay Exp $
[ 34.413908] avia_gt_ir: $Id: avia_gt_ir.c,v 1.30.4.6 2008/09/19 22:43:42 seif
e Exp $
[ 34.506857] avia_gt_core: Loaded AViA eNX/GTX driver
[ 35.056659] $Id: dbox2_napi_core.c,v 1.1.2.14 2007/10/09 21:52:21 carjay Exp
$
[ 35.140205] DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/6
00)
[ 35.229701] dbox2_napi: default value cfg->xin for ves1x93
[ 35.295094] dbox2_napi_core: pwm=0x48
[ 35.338608] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
[ 35.448710] avia_av_napi: $Id: dbox2_avia_av_napi.c,v 1.1.2.1 2005/01/31 03:0
4:12 carjay Exp $
[ 35.598749] $Id: dbox2_cam_napi.c,v 1.1.2.1 2005/01/31 03:04:12 carjay Exp $
[ 35.713456] avia_gt_napi: $Id: dbox2_avia_gt_napi.c,v 1.1.2.4 2007/10/09 01:0
3:45 carjay Exp $
[ 36.376620] avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54.2.5 2007/10/09 01:03:38
carjay Exp $
[ 36.508993] Console: switching to colour frame buffer device 90x36
[ 36.670629] avia_gt_fb: fb0: AViA eNX/GTX FB frame buffer device
[ 37.136492] avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14.4.7 2007/10/09 01:03:38
carjay Exp $
[ 37.586036] avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Ex
p $
[ 37.671924] avia_gt_pcm_set_rate(44100)
[ 38.097303] avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12.4.4 2007/10/09 01:03:38
carjay Exp $
[277] Jan 01 01:00:40 Failed reading '/var/etc/dropbear/dropbear_rsa_host_key',
disabling RSA
[277] Jan 01 01:00:40 Failed reading '/var/etc/dropbear/dropbear_dss_host_key',
disabling DSS
[277] Jan 01 01:00:40 premature exit: No hostkeys available
Starting the automounter
[ 42.580058] RPC: Registered udp transport module.
[ 42.633668] RPC: Registered tcp transport module.
starting pid 307, tty '': '/etc/init.d/start'
Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.266 2008/09/30 21:37:22 seife Exp $
[sectionsd] Caching max 5000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[camd] ca system id: 1722
$Id: zapit.cpp,v 1.410 2008/04/25 21:23:23 houdini Exp $
[frontend] uncommitted_switch_mode 0
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[controld] format: 4:3(LB)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
rdate: timeout connecting to time server
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[neutrino] initialized everything
[infoviewer] paint channel logo...
-> var/share/tuxbox/neutrino/icons/44da4016dcc.raw (hr-fernsehen)
-> 44px34px
-> mode: 3
[ 77.549526] avia_gt_core: masking unhandled irq reg 0 bit 7
[ 77.979970] avia_av: setting stream type AVIA_AV_STREAM_TYPE_PES/AVIA_AV_STRE
AM_TYPE_PES
[ 78.201255] PES, queue 0 normal.
[ 78.320671] avia_gt_core: masking unhandled irq reg 1 bit 15
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[timeThread] - 04.10.2008 13:44:31, tim: Sat Oct 4 13:44:31 2008
01:00:36.331 dmxSDT: going to sleep...
01:00:36.333 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[0] f
ilter 0x4e mask 0xff
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
13:44:31.064 dmxCN: going to sleep...
13:44:31.065 eit_set_update_filter, servicekey = 0x44da4016dcc, current version
255
[infoviewer] paint channel logo...
-> var/share/tuxbox/neutrino/icons/44da4016dcc.raw (hr-fernsehen)
-> 44px34px
-> mode: 3
Code: Alles auswählen
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 163280
verify sig: 262
Branching to 0x40000
U-Boot 1.2.0 (Tuxbox) (Sep 29 2008 - 23:05:45)
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ... done.
env: found "console"
env: found "baudrate"
env: found "dbox_duplex"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: console on ttyCPM0 (2.6)
2: console on fb0
3: console on ttyS0 (2.4)
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 985526 bytes loaded to 0x200000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00200000 ...
Image Name: Linux-2.6.26.4-dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 985462 Bytes = 962.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
[ 0.000000] Linux version 2.6.26.4-dbox2 (dbox@vm-dbox) (gcc version 3.4.6) #
2 PREEMPT Mon Sep 29 23:06:19 CEST 2008
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 8192
[ 0.000000] Normal 8192 -> 8192
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 8192
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 8128
[ 0.000000] Kernel command line: console=ttyS0,9600 dbox_duplex=0 root=/dev/m
tdblock2 rootfstype=squashfs
[ 0.000000] PID hash table entries: 128 (order: 7, 512 bytes)
[ 0.000000] Decrementer Frequency = 252000000/60
[ 0.000000] m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
[ 0.000000] m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
[ 10.919280] Console: colour dummy device 80x25
[ 10.919441] cpm_uart: console: compat mode
[ 10.919685] console [ttyCPM0] enabled
[ 11.957654] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 12.036484] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 12.127030] Memory: 30256k available (1624k kernel code, 492k data, 68k init,
0k highmem)
[ 12.440890] Mount-cache hash table entries: 512
[ 12.509856] net_namespace: 192 bytes
[ 12.551169] NET: Registered protocol family 16
[ 12.700778] NET: Registered protocol family 2
[ 12.849643] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 12.930348] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 13.011913] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 13.087710] TCP: Hash tables configured (established 1024 bind 1024)
[ 13.163516] TCP reno registered
[ 13.229817] NET: Registered protocol family 1
[ 13.279598] dbox2: Nokia board detected.
[ 13.346375] squashfs: version 3.0 (2006/03/15) / LZMA enabled Phillip Lougher
[ 13.429112] JFFS2 version 2.2. (NAND) 2001-2006 Red Hat, Inc.
[ 13.503874] io scheduler noop registered
[ 13.547318] io scheduler deadline registered (default)
[ 13.640108] Serial: CPM driver $Revision: 0.02 $
[ 13.692619] cpm_uart: WARNING: no UART devices found on platform bus!
[ 13.769188] cpm_uart: the driver will guess configuration, but this mode is n
o longer supported.
[ 13.874582] ttyCPM0 at MMIO 0xff000a80 (irq = 20) is a CPM UART
[ 13.947132] ttyCPM1 at MMIO 0xff000a90 (irq = 19) is a CPM UART
[ 14.054082] loop: module loaded
[ 14.089064] Linux video capture interface: v2.00
[ 14.147770] D-Box 2 flash driver (size->0x800000 mem->0x10000000)
[ 14.220934] D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
[ 14.300975] Intel/Sharp Extended Query Table at 0x0035
[ 14.363173] Using auto-unlock on power-up/resume
[ 14.418233] cfi_cmdset_0001: Erase suspend on write enabled
[ 14.485451] Creating 6 MTD partitions on "D-Box 2 flash memory":
[ 14.556797] 0x00000000-0x00020000 : "BR bootloader"
[ 14.624381] 0x00020000-0x00040000 : "FLFS (U-Boot)"
[ 14.688635] 0x00040000-0x005a0000 : "root (squashfs+lzma)"
[ 14.761926] 0x005a0000-0x00800000 : "var (JFFS2)"
[ 14.824586] 0x00020000-0x00800000 : "Flash without bootloader"
[ 14.902870] 0x00000000-0x00800000 : "Complete Flash"
[ 14.971074] mice: PS/2 mouse device common for all mice
[ 15.034681] half-duplex mode enabled
[ 15.078831] eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:42:18:48
[ 15.148436] TCP cubic registered
[ 15.187059] NET: Registered protocol family 17
[ 15.268812] VFS: Mounted root (squashfs filesystem) readonly.
[ 15.386535] Freeing unused kernel memory: 68k it
init started: BusyBox v1.7.2 (2008-10-04 14:29:11 CEST)
starting pid 124, tty '': '/etc/init.d/rcS'
/bin/makedevices
Detected STB:
Vendor: Nokia
Model: D-BOX2
[ 26.363279] [i2c-8xx]: mpc 8xx i2c init
[ 26.431434] [i2c-8xx]: adapter: 0
[ 27.167848] event: $Id: event.c,v 1.12.4.3 2007/10/09 01:04:05 carjay Exp $
[ 27.995357] lcd: init lcd driver module
[ 28.063293] lcd: found KS0713/SED153X lcd interface
[ 28.488990] input: DBOX-2 FP IR as /devices/virtual/input/input0
[ 29.452373] $Id: cam.c,v 1.30.2.6 2007/10/09 01:03:38 carjay Exp $
[ 29.523078] firmware: requesting cam-alpha.bin
[ 30.817635] avia_av: $Id: avia_av_core.c,v 1.98.2.13 2008/06/14 19:04:46 seif
e Exp $
[ 30.907751] firmware: requesting avia500.ux
[ 31.559306] avia_av_core: decoder watchdog thread started.
[ 31.621903] avia_av_event: $Id: avia_av_event.c,v 1.11.4.1 2005/01/21 21:23:3
8 carjay Exp $
[ 31.880700] avia_av_proc: $Id: avia_av_proc.c,v 1.14.2.5 2008/09/19 22:43:42
seife Exp $
[ 32.716833] avia_gt_core: $Id: avia_gt_core.c,v 1.48.2.6 2007/10/09 01:03:38
carjay Exp $
[ 32.811844] avia_gt_core: autodetecting chip type... GTX
[ 32.875538] avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Ex
p $
[ 33.218398] avia_gt_accel: $Id: avia_gt_accel.c,v 1.19.4.1 2007/10/09 01:03:3
8 carjay Exp $
[ 33.315451] avia_gt_core: masking unhandled irq reg 1 bit 11
[ 33.382878] avia_gt_core: masking unhandled irq reg 1 bit 13
[ 33.450588] avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210.2.8 2008/06/16 10:15:00 s
eife Exp $
[ 33.546366] firmware: requesting ucode.bin
[ 33.640113] avia_gt_ucode: loaded ucode vB107
[ 33.701732] avia_gt_ucode: ucode section filters disabled.
[ 33.765327] avia_gt_core: masking unhandled irq reg 0 bit 6
[ 33.832110] avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536)
, aligning...
[ 33.931277] avia_gt_gv: $Id: avia_gt_gv.c,v 1.39.2.5 2007/10/09 01:03:38 carj
ay Exp $
[ 34.024017] avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen E
xp $
[ 34.113444] avia_gt_pcm_set_rate(44100)
[ 34.159371] avia_gt_capture: $Id: avia_gt_capture.c,v 1.32.4.5 2007/10/09 01:
03:38 carjay Exp $
[ 34.263413] avia_gt_pig: $Id: avia_gt_pig.c,v 1.40.4.3 2007/10/09 01:03:38 ca
rjay Exp $
[ 34.359302] avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26.4.1 2007/10/09 01:03:39 ca
rjay Exp $
[ 34.454692] avia_gt_ir: $Id: avia_gt_ir.c,v 1.30.4.6 2008/09/19 22:43:42 seif
e Exp $
[ 34.547277] avia_gt_core: Loaded AViA eNX/GTX driver
[ 35.097632] $Id: dbox2_napi_core.c,v 1.1.2.14 2007/10/09 21:52:21 carjay Exp
$
[ 35.181317] DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/6
00)
[ 35.270547] dbox2_napi: default value cfg->xin for ves1x93
[ 35.335935] dbox2_napi_core: pwm=0x48
[ 35.379250] DVB: registering frontend 0 (VLSI VES1820 DVB-C)...
[ 35.488921] avia_av_napi: $Id: dbox2_avia_av_napi.c,v 1.1.2.1 2005/01/31 03:0
4:12 carjay Exp $
[ 35.638961] $Id: dbox2_cam_napi.c,v 1.1.2.1 2005/01/31 03:04:12 carjay Exp $
[ 35.753693] avia_gt_napi: $Id: dbox2_avia_gt_napi.c,v 1.1.2.4 2007/10/09 01:0
3:45 carjay Exp $
[ 36.417367] avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54.2.5 2007/10/09 01:03:38
carjay Exp $
[ 36.549264] Console: switching to colour frame buffer device 90x36
[ 36.711417] avia_gt_fb: fb0: AViA eNX/GTX FB frame buffer device
[ 37.177847] avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14.4.7 2007/10/09 01:03:38
carjay Exp $
[ 37.621420] avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Ex
p $
[ 37.707459] avia_gt_pcm_set_rate(44100)
[ 38.133676] avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12.4.4 2007/10/09 01:03:38
carjay Exp $
[277] Jan 01 01:00:40 Failed reading '/var/etc/dropbear/dropbear_rsa_host_key',
disabling RSA
[277] Jan 01 01:00:40 Failed reading '/var/etc/dropbear/dropbear_dss_host_key',
disabling DSS
[277] Jan 01 01:00:40 premature exit: No hostkeys available
Starting the automounter
[ 42.617539] RPC: Registered udp transport module.
[ 42.670538] RPC: Registered tcp transport module.
starting pid 307, tty '': '/etc/init.d/start'
Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
$Id: sectionsd.cpp,v 1.266 2008/09/30 21:37:22 seife Exp $
[sectionsd] Caching max 5000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[camd] ca system id: 1722
$Id: zapit.cpp,v 1.410 2008/04/25 21:23:23 houdini Exp $
[frontend] uncommitted_switch_mode 0
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[controld] format: 4:3(LB)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
rdate: timeout connecting to time server
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[neutrino] initialized everything
[infoviewer] paint channel logo...
-> var/share/tuxbox/neutrino/icons/44da4016dcc.raw (hr-fernsehen)
-> 44px34px
-> mode: 3
[ 77.570213] avia_gt_core: masking unhandled irq reg 0 bit 7
[ 78.028741] avia_av: setting stream type AVIA_AV_STREAM_TYPE_PES/AVIA_AV_STRE
AM_TYPE_PES
[ 78.235699] PES, queue 0 normal.
[ 78.360355] avia_gt_core: masking unhandled irq reg 1 bit 15
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[timeThread] - 04.10.2008 13:47:13, tim: Sat Oct 4 13:47:13 2008
01:00:34.895 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[0] f
ilter 0x4e mask 0xff
01:00:34.899 dmxSDT: going to sleep...
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
13:47:13.037 dmxCN: going to sleep...
13:47:13.038 eit_set_update_filter, servicekey = 0x44da4016dcc, current version
255
[infoviewer] paint channel logo...
-> var/share/tuxbox/neutrino/icons/44da4016dcc.raw (hr-fernsehen)
-> 44px34px
-> mode: 3
Kann dies der Grund sein?
PS: Mit einem Kernel 2.4 Image habe ich dieses Problem noch nicht gehabt.
Vielen Dank schonmal im Voraus.
