[PROBLEM] dccamd

[fergy]

Hello.
Anybody try to compile E1/Dreambox and got dccamd problem with kernel part?
When I remove it ( even from rcS or /bin ) everything is ok and box boot, but if it is present, box don't boot!
From debug:

Code: Alles auswählen

Dreambox DM7000                                                                                     
loaded at:     00500000 00614170                                                                    
relocated to:  00400000 00514170                                                                    
board data at: 00512124 00512170
relocated to:  00405194 004051E0
zimage at:     004058D5 00511589
avail ram:     00515000 02000000

Linux/PPC load: console=null root=/dev/mtdblock5 rootfstype=squashfs ro console=ttyS0,115200
Uncompressing Linux...done.
Now booting the kernel
Linux version 2.6.9 (fergy@localhost.localdomain) (gcc version 3.4.4) #1 Sun Nov 16 22:44:28 CET 2008
Built 1 zonelists
Kernel command line: console=null root=/dev/mtdblock5 rootfstype=squashfs ro console=ttyS0,115200
PID hash table entries: 256 (order: 8, 4096 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29952k available (1888k kernel code, 516k data, 80k init, 0k highmem)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
NET: Registered protocol family 16
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Serial: 8250/16550 driver $Revision: 1.90 $ 7 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 20) is a 16550A
ttyS1 at MMIO 0x0 (irq = 21) is a 16550A
ttyS2 at MMIO 0x0 (irq = 31) is a 16550A
loop: loaded (max 8 devices)
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@cam.org>
eth0: SMC91C11xFD (rev 1) at 0xc305e300 IRQ 28 [nowait]
eth0: Ethernet addr: 00:09:34:00:fb:e4
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
IBM STB04xxx OCP IDE driver version 2.3
hda: Maxtor 6E040L0, ATA DISK drive
Using deadline io scheduler
ide0 at 0xc30601f8-0xc30601ff,0xc30601f6 on irq 25
hda: max request size: 128KiB
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
 /dev/ide/host0/bus0/target0/lun0: p1
dreambox: flash mapping: 800000 at 7f800000
DreamBOX rev3+: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
disable flash VPP
Creating 7 MTD partitions on "DreamBOX rev3+":
0x00000000-0x00600000 : "DreamBOX cramfs+squashfs"
0x00600000-0x007c0000 : "DreamBOX jffs2"
0x007c0000-0x00800000 : "DreamBOX OpenBIOS"
0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)"
0x00000000-0x00800000 : "DreamBOX (w/ bootloader)"
0x00120000-0x00600000 : "DreamBOX SquashedFS"
0x00000000-0x00120000 : "DreamBOX Cramfs"
drivers/usb/host/ohci-ocp.c: ohci_hcd (OCP) at 0xe0010000, irq 18

ocp_usb 07: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
IBM IIC driver v2.1
ibm-iic0: using standard (100 kHz) mode
ibm-iic1: using standard (100 kHz) mode
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 80k init
init started: BusyBox v1.13.0 (2008-11-17 14:39:32 CET
starting pid 137, tty '': '/etc/init.d/rcS
head: module license 'Proprietary' taints kernel.
clear mem...done.
fp: attaching fp at 0xee to adapter IBM IIC
FPrev 0.06
fp selftest: PASSED.
using a0900000 as framebuffer base
VID_DISP_MODE set to 0088e6c0
registered framebuffer
allocated major 250 for denc.
[DENC] set PAL
[DENC] disable WSS
demux set source
core: Loaded IBM STB04xxx core driver
write 1 event's ...
[MPEG] setting vertical disp border to 288 lines (vsize is 0)
[MPEG] setting horizontal disp border to 360 lines (hsize is 0)
audio init
AUDIO_CLEAR_BUFFER
demux: init
[XP0] 2048kb ram used for queues
xp0_clk_stop
registering frontend...
disable continuous tone
XP0 FE Int 00000001
already got a frontend.
XP0 FE Int 00000008
XP0 FE Int 00000008
detected tuner.
stb04_pig: $Id: stb04_pig.c,v 1.16 2007/06/12 19:28:18 ghost Exp $
lcd.o: LCD driver (KS0713) module
avs: attaching avs at 0x94 to adapter IBM IIC
[AVS] set mode to FBAS
[CI] insert detected
write 1 event's ...
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
/etc/init.d/rcS: line 38: /bin/showlogo: not found
cp: cannot stat '/var_init/tuxbox/config/enigma/enigma.conf': No such file or directory
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: replayed 5 transactions in 0 seconds
ReiserFS: hda1: Using r5 hash to sort names

/dev/ide/host0/bus0/target0/lun0/disc:
 setting standby to 120
 (10 minutes 0 seconds)
hdparm: invalid option -- M
hdparm: can't open '128': No such file or directory
rm: cannot remove '/hdd/epg.*': No such file or directory
mount: mounting /dev/scsi/host0/bus0/target0/lun0/part1 on /mnt/usb failed: No such file or directory
mount: mounting /dev/scsi/host0/bus0/target0/lun0/disc on /mnt/usb failed: No such file or directory
Starting the automounter
rm: cannot remove '/var/etc/.dont_restart_enigma': No such file or directory
Oops: kernel access of bad area, sig: 11 [#1]
NIP: C38D2220 LR: C38D2208 SP: C153BEE0 REGS: c153be30 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 0000000C, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: 00000001 C153BEE0 C146ABF0 00000000 C0006A18 00000000 00000000 00000000 
GPR08: 25721CD4 00000000 24004424 FFFFFFFF 00009425 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 C390B81C 80047301 28000424 C390AFBC 
Call trace: [c38d277c]  [c006803c]  [c0003a40] 
Oops: kernel access of bad area, sig: 11 [#2]
NIP: C001B8C8 LR: C01D4808 SP: C153BD10 REGS: c153bc60 TRAP: 0300    Tainted: P  
MSR: 00021230 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: FFFFFFFF, DSISR: 00800000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: 00021230 C153BD10 C146ABF0 C390AFB4 C153BD20 00000000 C153BD30 C19BF648 
GPR08: 00200200 C153BD2C FFFFFFFF 00029230 28000428 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 C153BD20 C390AFB4 C146ABF0 C390AFB0 
Call trace: [c38d2388]  [c0055a5c]  [c00543b4]  [c001f348]  [c001fb58]  [c0004554]  [c000af30]  [c0003fa0]  [c38d2208]  [c38d277c]  [c006803c]  [c0003a40] 
Oops: kernel access of bad area, sig: 11 [#3]
NIP: C001BDB0 LR: C001F9AC SP: C153BBE0 REGS: c153bb30 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153BBE0 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [00000000]  [c38d2388]  [c0055a5c]  [c00543b4]  [c001f348]  [c001fb58]  [c0004554]  [c000af30]  [c0003fa0]  [c38d2 
Oops: kernel access of bad area, sig: 11 [#4]
NIP: C001BDB0 LR: C001F9AC SP: C153BAB0 REGS: c153ba00 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153BAB0 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153bbf8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [00000000]  [c38d2388]  [c0055a5c]  [c00543b4]  [c001f 
Oops: kernel access of bad area, sig: 11 [#5]
NIP: C001BDB0 LR: C001F9AC SP: C153B980 REGS: c153b8d0 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153B980 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153bac8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153bbf8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#6]
NIP: C001BDB0 LR: C001F9AC SP: C153B850 REGS: c153b7a0 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153B850 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b998]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153bac8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#7]
NIP: C001BDB0 LR: C001F9AC SP: C153B720 REGS: c153b670 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153B720 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b868]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b998]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#8]
NIP: C001BDB0 LR: C001F9AC SP: C153B5F0 REGS: c153b540 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153B5F0 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b738]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b868]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#9]
NIP: C001BDB0 LR: C001F9AC SP: C153B4C0 REGS: c153b410 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153B4C0 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b608]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b738]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#10]
NIP: C001BDB0 LR: C001F9AC SP: C153B390 REGS: c153b2e0 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153B390 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b4d8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b608]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#11]
NIP: C001BDB0 LR: C001F9AC SP: C153B260 REGS: c153b1b0 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153B260 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b3a8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b4d8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#12]
NIP: C001BDB0 LR: C001F9AC SP: C153B130 REGS: c153b080 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153B130 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b278]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b3a8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#13]
NIP: C001BDB0 LR: C001F9AC SP: C153B000 REGS: c153af50 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153B000 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b148]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b278]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#14]
NIP: C001BDB0 LR: C001F9AC SP: C153AED0 REGS: c153ae20 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153AED0 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b018]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b148]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#15]
NIP: C001BDB0 LR: C001F9AC SP: C153ADA0 REGS: c153acf0 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153ADA0 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153aee8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153b018]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#16]
NIP: C001BDB0 LR: C001F9AC SP: C153AC70 REGS: c153abc0 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153AC70 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153adb8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153aee8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#17]
NIP: C001BDB0 LR: C001F9AC SP: C153AB40 REGS: c153aa90 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153AB40 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153ac88]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153adb8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#18]
NIP: C001BDB0 LR: C001F9AC SP: C153AA10 REGS: c153a960 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153AA10 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153ab58]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153ac88]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#19]
NIP: C001BDB0 LR: C001F9AC SP: C153A8E0 REGS: c153a830 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153A8E0 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153aa28]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153ab58]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#20]
NIP: C001BDB0 LR: C001F9AC SP: C153A7B0 REGS: c153a700 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153A7B0 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153a8f8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153aa28]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#21]
NIP: C001BDB0 LR: C001F9AC SP: C153A680 REGS: c153a5d0 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153A680 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153a7c8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153a8f8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#22]
NIP: C001BDB0 LR: C001F9AC SP: C153A550 REGS: c153a4a0 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153A550 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153a698]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153a7c8]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#23]
NIP: C001BDB0 LR: C001F9AC SP: C153A420 REGS: c153a370 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153A420 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153a568]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153a698]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 
Oops: kernel access of bad area, sig: 11 [#24]
NIP: C001BDB0 LR: C001F9AC SP: C153A2F0 REGS: c153a240 TRAP: 0300    Tainted: P  
MSR: 00029230 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000020, DSISR: 00000000
TASK = c146abf0[211] 'dccamd' THREAD: c153a000Last syscall: 54 
PLB0: bear= 0x00000000 acr=   0x00000000 besr=  0x00000000
PLB0 to OPB: bear= 0x00000000 besr0= 0x00000000 besr1= 0x00000000

GPR00: C001F9AC C153A2F0 C146ABF0 30016218 00000000 FFFFFFFF 00000000 C0220000 
GPR08: C022B9DF 00000000 00004000 C0250000 28002422 10027244 FFFF7DFF FD14C97F 
GPR16: FFFFFFFF 3EF77FF9 FFFFFDFF 7FFFEA00 00000000 00000000 10090000 7FFFEA18 
GPR24: 1008D1EC 00000000 30025A90 00000004 0000000B C146ABF0 00000000 C146ABF0 
Call trace: [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153a438]  [c001f9ac]  [c0004554]  [c000af30]  [c0003fa0]  [c153a568]  [c001f9ac]  [c0004554]  [c000af30]  [c0003 

Note that this is NOT busybox 1.13 problem but dccamd! It don't work with bb 1.7 or 1.2 too
@waldi or @tmbinc ?

BTW, should I commit changes into cvs for bb 1.13 ?
Everything prepared and double checked for dreambox branch.

[PT-1]

Hello,

I might be wrong but the forum does not gove support for any kind of camd's !!

[fergy]

Hello,

I might be wrong but the forum does not gove support for any kind of camd's !!

Hello @PT-1
It's official deamon present in official image, just for support of official cards, no worry's
And I just want to know if somebody of dev's was change something inside as this is first time that I get this kind of error with it

[fergy]

EDIT for post #1: busybox 1.13 with all changes commited into cvs.
For dreambox branch:

Code: Alles auswählen

--with-busybox=1.13

For dBox, I can't test nowhere, so hope that it will work too.

[rhabarber1848]

For dBox, I can't test nowhere, so hope that it will work too.

But you could test if Dbox stuff still compiles

[fergy]

For dBox, I can't test nowhere, so hope that it will work too.

But you could test if Dbox stuff still compiles

Hehe, yes, true.
It compiles 100% so no problem with that. Last time I commit skin preview someone was told Me that must to put in general cvs, not in branch.... well, this time I was put in dreambox as know that it work on My eyes. If it compile well, that mean nothing to Me as same is with damn dccamd! It is copy'd image is compressed and when it is inside box... lol kernel "oops" So, no excuse this time, hehe

[mb405]

ich häng mich mal rein hier
ich hab mal den dreambox diff und den dbox diff der 1.12.2 zusammengeschmissen.
einzig der insmod.c teil geht nimmer, da der quellcode anders ist.

Code: Alles auswählen

diff -Naur busybox-1.12.2_org/modutils/insmod.c busybox-1.12.2/modutils/insmod.c
--- busybox-1.12.2_org/modutils/insmod.c	2008-09-28 20:04:15.000000000 +0200
+++ busybox-1.12.2/modutils/insmod.c	2008-11-17 13:47:46.000000000 +0100
@@ -3929,6 +3929,7 @@
 	int len;
 	int k_crcs;
 	char *tmp, *tmp1;
+	char *tmp2;
 	unsigned long m_size;
 	ElfW(Addr) m_addr;
 	struct obj_file *f;
@@ -4001,6 +4002,14 @@
 	}
 
 	/* Get a filedesc for the module.  Check that we have a complete path */
+	/* first look in /var/lib/modules */
+	tmp2 = alloca(strlen(m_fullName) + sizeof "/var/lib/modules//");
+	strcpy(tmp2, "/var/lib/modules/");
+	strcat(tmp2, m_fullName);
+	if (stat(tmp2, &st) >= 0 && S_ISREG(st.st_mode) && (fp = fopen(tmp2, "r")) != NULL) {
+		m_filename = xstrdup(tmp2);
+		printf("insmod: preferring module %s\n", m_filename);
+	} else
 	if (stat(arg1, &st) < 0 || !S_ISREG(st.st_mode)
 	 || (fp = fopen_for_read(arg1)) == NULL
 	) {

[url=htp://home.arcor.de/mb407/dbox2/busybox-1.13.0_2.diff]busybox patch nur dbox2[/url]
[url=htp://home.arcor.de/mb407/dbox2/busybox-1.13.0_3.diff]busybox patch von oben+patches von busybox.org[/url]
[url=htp://home.arcor.de/mb407/dbox2/busybox-1.13.0_4.diff]busybox patch von oben+patches von busybox.org+ dreambox patch[/url]

[fergy]

ich häng mich mal rein hier
ich hab mal den dreambox diff und den dbox diff der 1.12.2 zusammengeschmissen.
einzig der insmod.c teil geht nimmer, da der quellcode anders ist.

Code: Alles auswählen

diff -Naur busybox-1.12.2_org/modutils/insmod.c busybox-1.12.2/modutils/insmod.c
--- busybox-1.12.2_org/modutils/insmod.c	2008-09-28 20:04:15.000000000 +0200
+++ busybox-1.12.2/modutils/insmod.c	2008-11-17 13:47:46.000000000 +0100
@@ -3929,6 +3929,7 @@
 	int len;
 	int k_crcs;
 	char *tmp, *tmp1;
+	char *tmp2;
 	unsigned long m_size;
 	ElfW(Addr) m_addr;
 	struct obj_file *f;
@@ -4001,6 +4002,14 @@
 	}
 
 	/* Get a filedesc for the module.  Check that we have a complete path */
+	/* first look in /var/lib/modules */
+	tmp2 = alloca(strlen(m_fullName) + sizeof "/var/lib/modules//");
+	strcpy(tmp2, "/var/lib/modules/");
+	strcat(tmp2, m_fullName);
+	if (stat(tmp2, &st) >= 0 && S_ISREG(st.st_mode) && (fp = fopen(tmp2, "r")) != NULL) {
+		m_filename = xstrdup(tmp2);
+		printf("insmod: preferring module %s\n", m_filename);
+	} else
 	if (stat(arg1, &st) < 0 || !S_ISREG(st.st_mode)
 	 || (fp = fopen_for_read(arg1)) == NULL
 	) {

[url=htp://home.arcor.de/mb407/dbox2/busybox-1.13.0_2.diff]busybox patch nur dbox2[/url]
[url=htp://home.arcor.de/mb407/dbox2/busybox-1.13.0_3.diff]busybox patch von oben+patches von busybox.org[/url]
[url=htp://home.arcor.de/mb407/dbox2/busybox-1.13.0_4.diff]busybox patch von oben+patches von busybox.org+ dreambox patch[/url]

Why don't You try 1.13?
Those are old one ( if You don't have any personal reason to use 1.12 )
Btw, Your attach are 1.13, so I don't understand clearly are You talking about 1.12.2 ( what is diff ) or 1.13 ?
1.13 is commited by Me today and I don't see any problem here. For 1.12, please make new thread and post question as this is ONLY 1.13
Cheers

[Houdini]

bb-1.13 stock currently does not work well with the dbox setup.
There are terminal problems because of init and insmod is not working on 2.4 kernels.

[fergy]

bb-1.13 stock currently does not work well with the dbox setup.
There are terminal problems because of init and insmod is not working on 2.4 kernels.

Hmm, isn't @seife or somebody port new kernel? I was think that newmake have that Sorry!
I have it ( 2.6.26 ) working pretty well in My 7000'er. Only problem is that, that I must to cheat about head.ko
Why developers not port new kernel and recompiled head to branch, anyway? I don't see any reason except "I am lazy" or maybe occupation with oe boxes and 8000'er.
Also, that "close source" stuck with GPL as that head is pretty easy to decompile, but problem is in .... well don't know pretty well where.... somewhere between dmm and community... probably! If head is closed ( lol ) then They can compile it to be used with new kernel and not to put peoples around to cheat about it!
Erm, forget.........
Should I recheck compile and commit within few days?

[Houdini]

???
> Should I recheck compile and commit within few days?
Since you used the dreambox branch there is no need to worry about the dbox

[rhabarber1848]

Why developers not port new kernel and recompiled head to branch, anyway?

Kernel 2.4 is smaller and leaves more space in the 8MB Dbox-flash memory for other important stuff.
Kernel 2.6 is just an option for Dbox people, I doubt that it will ever become default.

[fergy]

???
> Should I recheck compile and commit within few days?
Since you used the dreambox branch there is no need to worry about the dbox

OK noted that down. Thx

[fergy]

Why developers not port new kernel and recompiled head to branch, anyway?

Kernel 2.4 is smaller and leaves more space in the 8MB Dbox-flash memory for other important stuff.
Kernel 2.6 is just an option for Dbox people, I doubt that it will ever become default.

Well, 2.6.xx can be small too, but this is not a topic anyway. I will remember this too.
Thank You both for quick reply.

[fergy]

Erm, sorry guys ( again ) , but what is with problem with #1 post?
I was go out of topic, but will like to know about dccamd problem.
Anybody can answer on that?
Appreciate answer.
Cheers

[Houdini]

Oops: kernel access of bad area, sig: 11 [#1]
DAR: 0000000C

This smells like a Null pointer access from one of the device drivers.
which device is dccamd using?

[fergy]

dccamd is dreamcrypt cam daemon

It's Dream Multimedia's own software cam for DreamCrypt encrypted channels, so I cannot say atm which device/s it use as don't have box here, but it's anyway closed source, so I don't know if anybody else try to compile image with dreambox tag and have same problem.
If have, then someone was change structure......
When I decompile it, will tell You exact thing... anyway I assume that it is probably almost same as camd or whatever dBox use for that.