Code: Alles auswählen
Âdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-6d.09.89.07.00.00-77
debug: HWrev 01 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036
debug: Got Block #0040
debug: Got Block #0044
will verify ELF image, start= 0x800000, size= 172392
verify sig: 262
Branching to 0x40000
U-Boot 1.3.4 (Tuxbox) (Oct 3 2008 - 20:41:44)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . | / . - \ | done.
env: found "console"
env: found "baudrate"
env: found "dbox_duplex"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1 0
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 687795 bytes loaded to 0x100000
## Booting kernel from Legacy Image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 687731 Bytes = 671.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37.1-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #1 Fr 1. Mai 16:32:23 CEST 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600 dbox_duplex=0
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30792k available (1168k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:30:af:f6
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS_LZMA)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.14.0 (2009-05-01 16:30:18 CEST)
starting pid 8, tty '': '/etc/init.d/rcS'
Starting the automounter
insmod: /lib/modules/2.4.37.1-dbox2//kernel/fs/cifs/cifs.o: module not found
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: no IDE-Interface detected
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 2.2 2009/02/07 21:51:28 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
ves1x93: Detected ves1993
DVB: registering frontend 0:0 (VES1993)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Thu Jan 1 12:00:00 CET 1970
$Id: sectionsd.cpp,v 1.292 2009/05/05 18:57:39 rhabarber1848 Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
12:00:02.883 Add Channel Blacklist for channel 0x042100010000, mask 0xffffffff0000
12:00:02.933 Add Channel Blacklist for channel 0x040200010000, mask 0xffffffff0000
12:00:03.019 Add Channel Blacklist for channel 0x045400010000, mask 0xffffffff0000
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
rdate: cannot connect to remote host (192.53.103.108): Connection refused
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.428 2009/04/28 06:43:03 rhabarber1848 Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
[getservices] dup transponder id 9 onid 85
[getservices] dup transponder id 444 onid 1
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 421 onid 1
[getservices] dup transponder id 3F8 onid 1
[getservices] dup transponder id 402 onid 1
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 42C onid 1
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 9 onid 85
[getservices] dup transponder id 436 onid 1
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 43A onid 1
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 7 onid 85
[getservices] dup transponder id 443 onid 1
[getservices] dup transponder id 444 onid 1
[getservices] dup transponder id 446 onid 1
[getservices] dup transponder id 44E onid 1
[getservices] dup transponder id 5 onid 85
[getservices] dup transponder id 21 onid 85
[getservices] dup transponder id 454 onid 1
[getservices] dup transponder id 459 onid 1
[getservices]: removing 'Top Girl Sex TV NEU' (service_id=0x315d): FAILED!
[getservices]: removing 'Gratis Hot TV NEU' (service_id=0x315e): FAILED!
[getservices] dup transponder id 45B onid 1
[getservices] dup transponder id 45D onid 1
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (3, Sagem D-BOX2)
[controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1
[CVideo::setVideoFormat] output format: 4:3(LB)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neutrino)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
imageinfo: JTG-Image [IDE] (2.3.2)
loading locales: scandir: No such file or directory
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=950 period=0 use kernel-repeat: no
[neutrino] received 17 sats
[neutrino] registering as event client
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[timeThread] - 09.05.2009 16:08:44, tim: Sat May 9 16:08:44 2009
[timeThread] Time set via DVB, going to sleep for 10800 seconds.
[zapit] tuned frequency does not match request. difference: 644
PES, queue 0 normal.
12:00:26.052 dmxSDT: going to sleep...
12:00:26.150 dmxCN: going to sleep...
12:00:26.151 eit_set_update_filter, servicekey = 0x44d00016dca, current version 29
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
16:09:28.172 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
16:09:31.673 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
16:09:33.829 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
16:09:36.481 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
16:09:40.483 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
16:09:43.466 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
16:09:45.919 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
16:09:48.459 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
16:09:53.882 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
16:09:55.992 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
16:09:59.837 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
16:10:05.578 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
16:10:16.686 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[4] filter 0x60 mask 0xf1
16:10:46.630 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x61 mask 0xf1
16:11:00.726 [sectionsd] DMX::readNbytes received POLLERR, pid 0x12, filter[5] filter 0x61 mask 0xf1
16:14:47.454 dmxCN: waking up again - requested from .change()
[zapit] tuned frequency does not match request. difference: 644
PES, queue 0 normal.
16:14:49.755 dmxCN: going to sleep...
16:14:49.756 eit_set_update_filter, servicekey = 0x43700016d66, current version 24
16:17:59.790 EIT Update Filter: Activate cnThread
16:17:59.827 dmxCN: waking up again - requested from .change()
16:18:35.146 dmxCN: going to sleep...
16:18:35.147 eit_set_update_filter, servicekey = 0x43700016d66, current version 25
16:47:59.210 EIT Update Filter: Activate cnThread
16:47:59.248 dmxCN: waking up again - requested from .change()
16:48:35.280 dmxCN: going to sleep...
16:48:35.281 eit_set_update_filter, servicekey = 0x43700016d66, current version 26
16:58:19.690 EIT Update Filter: Activate cnThread
16:58:19.727 dmxCN: waking up again - requested from .change()
16:58:55.022 dmxCN: going to sleep...
16:58:55.023 eit_set_update_filter, servicekey = 0x43700016d66, current version 27
16:59:51.960 EIT Update Filter: Activate cnThread
16:59:51.998 dmxCN: waking up again - requested from .change()
16:59:53.543 dmxCN: going to sleep...
16:59:53.544 eit_set_update_filter, servicekey = 0x43700016d66, current version 28
17:04:44.153 EIT Update Filter: Activate cnThread
17:04:44.192 dmxCN: waking up again - requested from .change()
17:04:46.044 dmxCN: going to sleep...
17:04:46.045 eit_set_update_filter, servicekey = 0x43700016d66, current version 29
Hier mal wieder eine Fehlermeldung vor dem Absturz...
Hat jemand eine Idee, was das Problem sein könnte?
)