ich hab mir mit cygwin enigma compeliert und das lief auch schon mit den cdkroot, dann hab ich mal ein bischen mit den sysmlink von den libs rumgespielt und dann ging das selbstgebastelte cdkroot nicht mehr.
also hab ich die enigma sachen da rauskopiert und in ein yadd(das neuste von dboxupdate.berlios.de) rein und dann kommt das:
ppcboot 0.6.4 (Feb 28 2002 - 20:04:24)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-2b-b7-ef
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x84A7E (0x1E00 bytes)
FB logo at: 0x868A6 (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.24
Filename 'D/cygwin/home/RathMa/yaddt/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 685319 Bytes = 669 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (wild@p200) (gcc version 3.0.4) #1 Fre Mr 29 14:22:52 CET 20
02
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.2:D/cygwin/home
/RathMa/yaddt/cdkroot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.2:D/cygwin
/home/RathMa/yaddt/cdkroot/
time_init: decrementer frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30412k available (1248k kernel code, 472k data, 68k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20104kB/6701kB, 64 slots per queue
loop: enabling 8 loop devices
eth0: CPM ENET Version 0.2, 00:50:9c:2b:b7:ef
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR Bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var ( JFFS2 )"
0x00160000-0x00760000 : "root ( CramFS )"
0x00760000-0x00800000 : "ppcboot"
0x00020000-0x00800000 : "GesamtesFlashohneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.2, my address is 192.168.0.24
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.0.2
Looking up port of RPC 100005/2 on 192.168.0.2
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 68k in
init started: BusyBox v0.61.pre (2002.04.02-22:55+0000) multi-caReal Time Clock
Driver v0.1
i2c-core.o: i2c core module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
event: init ...
Init TDA8044H
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.28 2002/03/17 16:25:38 happydude Exp $
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
write 1 event's ...
write 1 event's ...
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 2
[FONT] initializing core...registering device.
[FONT] adding font /share/fonts/Arial_Bold.ttf...OK (Arial/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Arial/Bold)
mouse0: PS/2 mouse device for input0
mice: PS/2 mouse device common for all mice
event0: Event device for input0
i2c-core.o: driver TDA8044H DVB DECODER registered.
tda8044h.o: attaching TDA8044H at 0xd0
i2c-core.o: client [TDA8044H] registered to adapter [](pos. 4).
registering frontend...
sync: 00
enx-core: Loaded AViA eNX core driver
gen_dmx: found enx
ENX-INITed -> 0
there MIGHT be no TS
avia_vbi: version (Apr 6 2002-08:42:35)
avia_vbi: got demux C-Cube - AViA GTX/DMX
Console: switching to colour frame buffer device 90x36
fb0: AViA eNX/GTX Framebuffer frame buffer device
$Id: enx_capture.c,v 1.4 2001/12/01 06:37:06 gillem Exp $
enigma, Copyright (C) dbox-Project
enigma comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome
to redistribute it under certain conditions.
It is licensed under the GNU General Public License,
Version 2
+ (1) d-Box LCD Hardware
+ (1) gRC
+ (1) GFBDC
1024k video mem
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth
not supported+ (1) Font Render Class
[FONT] initializing core...
[FONT] loading fonts...
[FONT] adding font /share/fonts/unmrs.pfa... failed: Operation not permitted
[FONT] adding font /share/fonts/Marlett.ttf...OK (Marlett Regular)
[FONT] Intializing font cache, using max. 4MB...
+ (1) RC Input layer
+ (2) skin subsystem
+ (2) DreamBox RC Hardware
[1505] failed to open /dev/rawir
+ (2) d-Box RC Hardware
+ (3) eWindow
+ (3) eWidget
+ (3) eProgress
+ (3) ePixmap
+ (3) eListbox
+ (3) eLabel
+ (3) eCheckbox
+ (3) eButton
+ (4) eDVB core
[0262] FreqOffset = 0
[0022] instance: 0x100fe360
[0001] setInput 0, fd=11
SET VSW: 0 1
SET VSW: 1 1
[0092] eDVB::eDVB
.+ (5) EPG cache
[0031] [EPGC] Initialized EPGCache
reached rl 5
[0054] <-- network
[0468] [PROFILE] eZapMain
face NimbusSansL-Regular Sans L Regular does not exist!
Aborted
Please press Enter to activate this console.
