1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x84A22 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 543202 Bytes = 530 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (von alexW) (gcc version 3.0.4) #1 Son Mr 3 00:30:21 CET 200
2
Boot arguments: ro root=/dev/mtdblock/3 console=ttyS0
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/mtdblock/3 console=ttyS0
time_init: decrementer frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x3000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30748k available (984k kernel code, 412k data, 56k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20328kB/6776kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:12:84:3e
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR Bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x00160000 : "var ( JFFS2 )"
0x00160000-0x00760000 : "root ( CramFS )"
0x00760000-0x00800000 : "ppcboot"
0x00020000-0x00800000 : "GesamtesFlashohneBL"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 56k in
init started: BusyBox v0.61.pre (2002.04.02-22:55+0000) multi-caUpdate altes Ba
seimage...
rm: cannot remove `/var/tuxbox/config/zapit/*': No such file or directory
rm: cannot remove `/var/tuxbox/config/satellites.xml': No such file or directory
mv: unable to rename `/var/tuxbox/config/services.xml': No such file or director
y
Real Time Clock Driver v0.1
i2c-core.o: i2c core module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
event: init ...
Init VES1820 / VES1893
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.28 2002/03/17 16:25:38 happydude Exp $
avia_core.c: do_firmread: Unable to load '/var/tuxbox/ucodes/avia500.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
/lib/modules/2.4.2/misc/cam.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wait
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_command
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_rd
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_flush_pcr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_read_message
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_reset
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol cam_write_message
/lib/modules/2.4.2/misc/dvb.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.
[FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
mouse0: PS/2 mouse device for input0
mice: PS/2 mouse device common for all mice
event0: Event device for input0
/lib/modules/2.4.2/misc/ves1893.o: unresolved symbol register_frontend
/lib/modules/2.4.2/misc/ves1893.o: unresolved symbol unregister_frontend
/lib/modules/2.4.2/misc/ves1893.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.
Network LCD-Driver $Id: lcdd.cpp,v 1.45 2002/04/20 20:27:41 McClean Exp $
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...avia_gt_core: $Id: avia_gt_core.c,v 1.10 2002/04
/19 08:54:48 Jolt Exp $
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.9 2002/04/16 15:57:23 Jolt Exp $
avia_gt_gv: $Id: avia_gt_gv.c,v 1.6 2002/04/21 14:36:07 Jolt Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
timebase_interrupt()
timebase_interrupt()
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.10 2002/04/14 18:06:19 Jolt Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.14 2002/04/18 18:42:25 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
[FONT] FTC_Face_Requester (Micron/Regular)
/lib/modules/2.4.2/misc/avia_gt_dmx.o: unresolved symbol avia_set_pcr
/lib/modules/2.4.2/misc/avia_gt_dmx.o: unresolved symbol unregister_demux
/lib/modules/2.4.2/misc/avia_gt_dmx.o: unresolved symbol register_demux
/lib/modules/2.4.2/misc/avia_gt_dmx.o:
Hint: You are trying to load a module without a GPL compatible license
and it has unresolved symbols. Contact the module supplier for
assistance, only they can help you.
[timerd] startup
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.5 2002/04/19 08:54:48 Jolt Exp $
avia_gt_vbi: error - no demux found
/lib/modules/2.4.2/misc/avia_gt_vbi.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.24 2002/04/21 14:36:07 Jolt Exp $
Console: switching to colour frame buffer device 90x36
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
$Id: sectionsd.cpp,v 1.121 2002/04/19 07:04:44 field Exp $
caching 96 hours
events are old 60min after theirgtx_pig: init
gtx_pig: WIDTH=160, S=0, HEIGHT=144
end time
CXA2092 found
[sectionsd ] checking timerd
[sectionsd ] timerd available
CXA2092 found
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
[sectionsd] DMX: DMX_STOP: Bad file descriptor
$Id: zapit.cpp,v 1.158 2002/04/21 22:09:59 obi Exp $
/var/tuxbox/config/zapit/zapit.conf: No such file or directory
/dev/ost/frontend0: No such file or directory
[zapit] unable to open frontend devices. bye.
Segmentation fault
Controld $Id: controld.cpp,v 1.57 2002/03/29 15:47:18 obi Exp $
[controld] error while loading settings: /var/tuxbox/config/controld.conf
[controld] using defaults
[controld] Boxtype detected: (01, 1, 1, Nokia)
set event: 00000009
[nhttpd] Neutrino HTTP-Server starting..
zapitclient: connect: No such file or directory
zapitclient: connect: No such file or directory
httpd gestartet
timebase_interrupt()
timebase_interrupt()
[sectionsd] DMX: /dev/ost/demux0: No such file or directory
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
Oops: kernel access of bad area, sig: 11
NIP: C002C27C XER: C000007F LR: C002CB9C SP: C1921E20 REGS: c1921d70 TRAP: 0300
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 000003E8, DSISR: 0000017F
TASK = c1920000[143] 'sectionsd' Last syscall: 167
last math 00000000 last altivec 00000000
GPR00: C0178000 C1921E20 C1920000 00009032 00001032 C1921E18 C1921E1C 00000000
GPR08: 00020000 C0130000 C01F8040 C0130000 95355053 10040244 01FE7600 01F9FB88
GPR16: 0FFA352C 00000000 0FFA33D0 00000000 00009032 C1921E48 00000000 00000001
GPR24: C19BD320 7F5FF9F0 00000000 00000065 00000001 00000000 00000000 000003E8
Call backtrace:
C002CB9C C002CBCC C0046200 C000249C 0FC91A60 10005038 1000C588
0FF87398 0FD48878
timebase_interrupt()
timebase_interrupt()
NeutrinoNG $Id: neutrino.cpp,v 1.241 2002/04/22 01:56:44 McClean Exp $
[neutrino] frameBuffer Instance created
[FONT] initializing core...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
1024k video mem
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth
not supported[neutrino] main Instance created
jffs2_lookup()
error while loading settings: /var/tuxbox/config/neutrino.conf
jffs2_lookup()
error while loading scan-settings!
jffs2_lookup()
controldclient: connect: Connection refused
using defaults...
controldclient: connect: Connection refused
enable flash
Software update enabled
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] adding font /share/fonts/micron_italic.ttf...OK (Micron/Italic)
[FONT] FTC_Face_Requester (Micron/Bold)
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
[FONT] FTC_Face_Requester (Micron/Regular)
[FONT] FTC_Face_Requester (Micron/Italic)
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
[sectionsdclient] connect: Connection refused
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
timebase_interrupt()
Segmentation fault
timebase_interrupt()
timebase_interrupt()
The system is going down NOW !!
Sending SIGTERM to all processeNode read from 00080cf0: node_crc 363ff66e, calcu
lated CRC 363ff66e. dsize 3, csize 3, offset 0, buf c01fca20
Read 3 bytes to c01fca20
Data CRC matches calculated CRC d3aea45a
Sending SIGKILL to all processes.
jffs2_garbage_collect_thread(): SIGKILL received.
CXA2092 found
The system is halted. Press CTRL-ALT-DEL or turn off power
System halt
Wer kann mir bei dem Problem helfen.
Ist ne Nokia 2 / 2xAMD / Avia500 / SAT
Gruß Stephan
