Sagem - GameOver?

Wie blitze ich ein Bild - Permanent Outgoing Incomes
Saaroimel
Interessierter
Interessierter
Beiträge: 20
Registriert: Dienstag 21. Mai 2002, 08:24

Sagem - GameOver?

Beitrag von Saaroimel »

So, nach der ganzen Bastelei am heutigen Tage habe ich Neutrino auf meiner Nokia am laufen. Nur die Sagem, die macht mir Sorgen. Sobald ich das Teil endlich soweit habe, dass es überhaupt reagiert, und dann versuche das Flash einzuspielen, kommt folgendes:

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-72.5c.eb.07.00.00-d8
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.23
debug: Sending TFTP-request for file D/DBBOOT/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-32-e2-d4
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.23
Filename 'D/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.23
Filename 'D/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /D/image/alexW2xBaseimageV1.5.img
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.23
Filename '/D/image/alexW2xBaseimageV1.5.img'.
Load address: 0x120000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################NIP: 01FDA4C0 XER: 0000287F LR: 01FDA4A4 REGS: 0
1f9f968 TRAP: 1000 DAR: 0000287F
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: 0000D6C4 01F9FA58 00000000 01FD8D88 00000023 000005AC 00000204 00000004
GPR08: 0000000C FF002811 01FE0ED0 01FE0ED8 24202088 000328A4 01FE7100 01F80000
GPR16: 00000000 00000000 00000000 00000000 00001002 01F9FA78 08lX 01FC209C
PR24: 01FD8974 01F9FFC0 01F9FD6D 000005AC 01FE0FA0 01FE810C 01FE7B68 01F9FA88 Ca
ll backtrace:
01FC209C 01FD89A0 01FC209C 01FD8E50 01FD1F8C 01FD2114 01FD3A1C
01FD3324 01FD9C18 01FD2EC0 01FD1098 01FD0E80 01FCCFE0 01FCD0AC
01FCC770 01FCC5CC 01FC23B0
Software Emulation Exception
### ERROR ### Please RESET the board ###

Tja, woran könnte das liegen? Ist vielleicht mein Flash Speicher defekt?

Oimel
Dj

Nein

Beitrag von Dj »

Das problem habe ich gehabt du darfst am image nichts ändern !

versuche nun version 1.4
danach 1.5 nur das reine image

ich musste gestern ca 2 stunden daran arbeiten !

Wenn kein System steht probiere noch mal!