"kein System" nach flasvorgang trotz richtigem 1xI

Anlaufschwierigkeiten? Was ist was? Worum geht's?
Stip1234
Neugieriger
Neugieriger
Beiträge: 8
Registriert: Sonntag 5. Mai 2002, 16:45

"kein System" nach flasvorgang trotz richtigem 1xI

Beitrag von Stip1234 »

Hallo, ich hab hier ein interessantes Problem.

Ich erhalte nach anscheinend erfolgreichem flashvorgang (richtiges Image ist ausgewählt 1xI) nach neustart der dobx die displaymeldung "kein System" hab auch schon unterschiedlich ppcboot versionen ausprobiert sowie unterschiedliche images (immer 1xI)
Ebenfalls bin ich nach folgendem Schema vorgegangen zusätzlich zu dem Uttilieties image flashen http://www.dhoelscher.de/dbox2/flashprob.html

aber alles hilft nicht !

Hat jemand eine Erklärung dafür ?
Besser wäre natürlich noch eine lösung.

hier der mitschnitt der com konsole

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID Hier steht die dsID
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.168.3, My IP 192.168.168.4
debug: Sending TFTP-request for file D/Programe/Premiere/Software/Yadd/tftpboot/
ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: Hier steht die Mac Adresse
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.168.3; our IP address is 192.168.168.4
Filename 'D/Programe/Premiere/Software/Yadd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: #
Abort
LCD logo not found
BOOTP broadcast 1

Abort
FB logo not found
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot>

dbox2-ppcboot> bootp 120000 /D/Programe/Premiere/Software/Yadd/tftpboot/13.img
BOOTP broadcast 1
TFTP from server 192.168.168.3; our IP address is 192.168.168.4
Filename '/D/Programe/Premiere/Software/Yadd/tftpboot/13.img'.
Load address: 0x120000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
######################
done

dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors

dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
sector 63 .... done
Erased 63 sectors

dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash...
Flashed 7MB
done

dbox2-ppcboot>


Nach neustart der box erscheint dennoch kein system !!!!!

Vielen Dank für die Hilfe
Dietmar
Senior Member
Beiträge: 8282
Registriert: Mittwoch 10. Oktober 2001, 00:00

Beitrag von Dietmar »

Was ist das denn für ein Image?
7 MB sind ein bisschen wenig.

Was kommt denn wenn Du mit dem Image flashen Button flasht?
Stip1234
Neugieriger
Neugieriger
Beiträge: 8
Registriert: Sonntag 5. Mai 2002, 16:45

Beitrag von Stip1234 »

Wenn ich mit dem image flash button versuche ein image zu erstellen kommt genau dieser trace !!!

Der flashvorgang geht von 0MB über 1MB bis 7MB

Woran kann das liegen ?
Dietmar
Senior Member
Beiträge: 8282
Registriert: Mittwoch 10. Oktober 2001, 00:00

Beitrag von Dietmar »

Was ist es denn für ein Image?
Nen wenig unterschiedlich müsste der Flashvorgang per Image flashen schon sein.
Stip1234
Neugieriger
Neugieriger
Beiträge: 8
Registriert: Sonntag 5. Mai 2002, 16:45

Beitrag von Stip1234 »

Das selbe passiert mit dem alexW1xBaseimageV1.5.img


debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.168.3, My IP 192.168.168.4
debug: Sending TFTP-request for file D/Programe/Premiere/Software/Yadd/tftpboot/
ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet:
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.168.3; our IP address is 192.168.168.4
Filename 'D/Programe/Premiere/Software/Yadd/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: #
Abort
LCD logo not found
BOOTP broadcast 1

Abort
FB logo not found
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot>

dbox2-ppcboot> bootp 120000 /F/alexW1xBaseimageV1.5.img
BOOTP broadcast 1
TFTP from server 192.168.168.3; our IP address is 192.168.168.4
Filename '/F/alexW1xBaseimageV1.5.img'.
Load address: 0x120000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
#T ##########T #################################################################
################################################################################
################################################################################
################################################################################
#####################################################################T #########
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
############################
done

dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors

dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
sector 63 .... done
Erased 63 sectors

dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash...
Flashed 7MB
done

dbox2-ppcboot>
Stip1234
Neugieriger
Neugieriger
Beiträge: 8
Registriert: Sonntag 5. Mai 2002, 16:45

Beitrag von Stip1234 »

und wenn ich eine andere pcpboot benutze bekomme ich folgendes

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.168.3, My IP 192.168.168.4
debug: Sending TFTP-request for file D/Programe/Premiere/Software/Yadd/tftpboot/
ppcboot
will verify ELF image, start= 0x800000, size= 201852
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Feb 28 2002 - 20:04:24)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet:
FLASH: 8 MB
LCD driver (KS0713) initialized
Bus Fault @ 0x01fda664, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9fa28 Unknown values in msr
NIP: 01FDA664 XER: 6000B92D LR: 01FD2DBC REGS: 01f9fa28 TRAP: 0200 DAR: 00009002

MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: 00000000 01F9FB18 00000000 3544DD12 01FDEC1C 00000020 01F9FF08 01F9FF0C
GPR08: 00000000 2542DD0E FF002808 00000000 00000000 000328A4 01FE7200 01F80000
GPR16: BD59FFFF 00000000 007FFF00 007FFEC0 20004000 00000001 60634001 00002580
GPR24: FF002FC0 01F9FF0C 01F9FF08 01FDEC1C FFFFFFFF 10020000 3544DD0E 2542DD0E
Call backtrace:
00000003 01FD66C8 01FCC5B4 01FC23B0
machine check
### ERROR ### Please RESET the board ###

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.168.3, My IP 192.168.168.4
debug: Sending TFTP-request for file D/Programe/Premiere/Software/Yadd/tftpboot/
ppcboot
will verify ELF image, start= 0x800000, size= 201852
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Feb 28 2002 - 20:04:24)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet:
FLASH: 8 MB
LCD driver (KS0713) initialized
Bus Fault @ 0x01fda664, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01f9fa28 Unknown values in msr
NIP: 01FDA664 XER: 6000B92D LR: 01FD2DBC REGS: 01f9fa28 TRAP: 0200 DAR: 00009002

MSR: 00009002 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00

GPR00: 00000000 01F9FB18 00000000 3544DD12 01FDEC1C 00000020 01F9FF08 01F9FF0C
GPR08: 00000000 2542DD0E FF002808 00000000 00000000 000328A4 01FE7200 01F80000
GPR16: BD59FFFF 00000000 007FFF00 007FFEC0 7DD04000 00000001 60634001 00002580
GPR24: FF002FC0 01F9FF0C 01F9FF08 01FDEC1C FFFFFFFF 10020000 3544DD0E 2542DD0E
Call backtrace:
00000003 01FD66C8 01FCC5B4 01FC23B0
machine check
### ERROR ### Please RESET the board ###

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.168.3, My IP 192.168.168.4
debug: Sending TFTP-request for file D/Programe/Premiere/Software/Yadd/tftpboot/
ppcboot
debug: Got Block #0350
Schamane21
Erleuchteter
Erleuchteter
Beiträge: 774
Registriert: Donnerstag 31. Januar 2002, 16:25

Beitrag von Schamane21 »