Hi, everyone, my appoligise if this is in the wrong section or forum but I have no idea who or where to ask.
I have now two dbox2's both with the same symptom's.
First is a nokia cable 2xI, there is nothing on the screen except a dim light, this box worked for two weeks then nothing.
Second is a Sagem cable 2xI, this one I stuffed myself by doing it the same way as the bmon 1.0, but it was a bmon 1.2, but the syptoms are exactly the same as above.
I have taken the 28f320 chips out & re-flashed them with ones from the same boxes (nokia 2xI & sagem 2xI ) but there is no change???
I have checked the flash checksums with the copied ones & they are the same? I have no idea where to start looking??
p.s. I am a qualified electronics engineer, so I have access to any equipment needed.
I hope someone help as I am now stuck & no idea what to try next.
Thanks in advance.
S.E.
nokia & sagem no display??
-
- Neugieriger
- Beiträge: 11
- Registriert: Montag 25. Oktober 2004, 00:03
-
- Oberlamer, Administrator & Supernanny
- Beiträge: 10532
- Registriert: Samstag 13. Juli 2002, 10:49
Maybe you mixed the Flashs (IH2 soldered on IH5 and vice versa).
Does the CPU read out some data from the Flashs (measure address and data-pins with an osciloscope). Does the CPU run on 16MHz (default) or 66MHz (first few Bytes of the BMon set it to that frequency) - for Nokia the freq. is on RPN1 - Sagem I don't know right now.
Does the CPU read out some data from the Flashs (measure address and data-pins with an osciloscope). Does the CPU run on 16MHz (default) or 66MHz (first few Bytes of the BMon set it to that frequency) - for Nokia the freq. is on RPN1 - Sagem I don't know right now.
There are 10 types of people in the world: those who know binary and those who don't
-
- Neugieriger
- Beiträge: 11
- Registriert: Montag 25. Oktober 2004, 00:03
Hi m8, thanks for the reply, I checked & double checked that I had the correct on in the right place, even to re-moving & flashing one at a time, but still the same, I must admit to not checking the prosessor as was not sure of what & where to start, but now I shall do the checks you suggest, Just a quick one though, the bmon does not even make any attempt to start, just compleatly blank execept for a smallll brightness in the display....
Once again thanks for the tips....more would certainly help...thanks..
S.E.
Once again thanks for the tips....more would certainly help...thanks..
S.E.
-
- Oberlamer, Administrator & Supernanny
- Beiträge: 10532
- Registriert: Samstag 13. Juli 2002, 10:49
-
- Neugieriger
- Beiträge: 11
- Registriert: Montag 25. Oktober 2004, 00:03
-
- Contributor
- Beiträge: 1623
- Registriert: Donnerstag 10. Januar 2002, 20:03
-
- Neugieriger
- Beiträge: 11
- Registriert: Montag 25. Oktober 2004, 00:03
-
- Tuxboxer
- Beiträge: 2614
- Registriert: Montag 20. Mai 2002, 10:49
- Image: JTG-Image [IDE] Version 2.4.4
- Image: (7025SS) Merlin
-
- Neugieriger
- Beiträge: 11
- Registriert: Montag 25. Oktober 2004, 00:03