Nokia 2xAMD Avia 500 m. Speichererweiterung loopt

Hi!

Hab hier ein Problem mit der oben genannten Box. Sie läuft bis zum Logo hoch und resettet dann wieder!! Flashen klappt einwandfrei. Ist eine Box mit 16 MB Ram als Speichererweiterung gesteckt und 16 MB auf dem Board!

Hier ein Auszug aus den Log:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID xxxxxxxxxxxxxxxxxxxx
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root/platform/nokia-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0200

will verify ELF image, start= 0x800000, size= 208073
verify sig: 262
Branching to 0x40000

ppcboot 0.6.4 (Jul 10 2001 - 11:31:30)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-40-1b-2c
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x8A01C (0x1E00 bytes)
FB driver (AVIA-GTX) initialized
FB logo at: 0x80833 (0x97C1 bytes)
Input: serial
Output: serial

1: Console on fb
2: Console on ttyS0
Select (1-4), other keys to stop autoboot: 0
unprotecting 4
[0]-> [0] [S800080] unprotecting 5
[0]-> [0] [S800080] unprotecting 6
[0]-> [0] [S800080] unprotecting 7
[0]-> [0] [S800080] unprotecting 8
[0]-> [0] [S800080] unprotecting 9
[0]-> [0] [S800080] unprotecting a
[0]-> [0] [S800080] unprotecting b
[0]-> [0] [S800080] unprotecting c
[0]-> [0] [S800080] unprotecting d
[0]-> [0] [S800080] unprotecting e
[0]-> [0] [S800080] unprotecting f
[0]-> [0] [S800080] unprotecting 10
[0]-> [0] [S800080] unprotecting 11
[0]-> [0] [S800080] unprotecting 12
[0]-> [0] [S800080] unprotecting 13
[0]-> [0] [S800080] unprotecting 14
[0]-> [0] [S800080] unprotecting 15
[0]-> [0] [S800080] unprotecting 16
[0]-> [0] [S800080] unprotecting 17
[0]-> [0] [S800080] unprotecting 18
[0]-> [0] [S800080] unprotecting 19
[0]-> [0] [S800080] unprotecting 1a
[0]-> [0] [S800080] unprotecting 1b
[0]-> [0] [S800080] unprotecting 1c
[0]-> [0] [S800080] unprotecting 1d
[0]-> [0] [S800080] unprotecting 1e
[0]-> [0] [S800080] unprotecting 1f
[0]-> [0] [S800080] unprotecting 20
[0]-> [0] [S800080] unprotecting 21
[0]-> [0] [S800080] unprotecting 22
[0]-> [0] [S800080] unprotecting 23
[0]-> [0] [S800080] unprotecting 24
[0]-> [0] [S800080] unprotecting 25
[0]-> [0] [S800080] unprotecting 26
[0]-> [0] [S800080] unprotecting 27
[0]-> [0] [S800080] unprotecting 28
[0]-> [0] [S800080] unprotecting 29
[0]-> [0] [S800080] unprotecting 2a
[0]-> [0] [S800080] unprotecting 2b
[0]-> [0] [S800080] unprotecting 2c
[0]-> [0] [S800080] unprotecting 2d
[0]-> [0] [S800080] unprotecting 2e
[0]-> [0] [S800080] unprotecting 2f
[0]-> [0] [S800080] unprotecting 30
[0]-> [0] [S800080] unprotecting 31
[0]-> [0] [S800080] unprotecting 32
[0]-> [0] [S800080] unprotecting 33
[0]-> [0] [S800080] unprotecting 34
[0]-> [0] [S800080] unprotecting 35
[0]-> [0] [S800080] unprotecting 36
[0]-> [0] [S800080] unprotecting 37
[0]-> [0] [S800080] unprotecting 38
[0]-> [0] [S800080] unprotecting 39
[0]-> [0] [S800080] unprotecting 3a
[0]-> [0] [S800080] unprotecting 3b
[0]-> [0] [S800080] unprotecting 3c
[0]-> [0] [S800080] unprotecting 3d
[0]-> [0] [S800080] unprotecting 3e
[0]-> [0] [S800080] unprotecting 3f
[0]-> [0] [S800080] unprotecting 40
[0]-> [0] [S800080] unprotecting 41
[0]-> [0] [S800080] unprotecting 42
[0]-> [0] [S800080] Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x807D7 bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 526230 Bytes = 513 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID xxxxxxxxxxxxx
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root/platform/nokia-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0200

will verify ELF image, start= 0x800000, size= 208073
verify sig: 262
Branching to 0x40000

ppcboot 0.6.4 (Jul 10 2001 - 11:31:30)

Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-40-1b-2c
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x8A01C (0x1E00 bytes)
FB driver (AVIA-GTX) initialized

Weis jemand Rat??

Gruß

Ralf

Beitrag von **rollorcs** » Sonntag 4. August 2002, 00:16

Hi!

Ich nochmal, gehe jetzt mal von einem Hardwaredefekt aus. Yadd wird auch nicht gebootet, das gleiche Problem. Kann es evtl. sein, daß da ein Rambaustein defekt ist?? Speichererweiterung ist O.K. Kann man den Onboard Ram irgendwie softwaremäßig testen?

Gruß

Ralf

Beitrag von **SoLaLa** » Sonntag 4. August 2002, 01:09

wenn du beim booten an der stelle der Abfrage mit der Zifferntaste "2" die ausgabe aufs COM lenkst, kommt dann nach

Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

noch mehr im COM???

Beitrag von **rollorcs** » Sonntag 4. August 2002, 10:40

Nein, startet dann sofort neu!

Gruß

Ralf